MudmotorTalk.com
http://www.mudmotortalk.com/mmt_v2/

My boat build pics
http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=17&t=22204		 Page 1 of 1
Author:  ibfishin [ Sat Sep 17, 2011 6:47 am ]
Post subject:  My boat build pics






Author:  lastchance [ Sat Sep 17, 2011 9:20 am ]
Post subject: 
Author:  lastchance [ Sat Sep 17, 2011 9:21 am ]
Post subject:  Re: My boat build pics
Looking good!
Author:  mw46 [ Sat Sep 17, 2011 1:38 pm ]
Post subject:  Re: My boat build pics
Nice butthole in the front deck :lol: just kiddin, looks good. Size?
Author:  OwenDickeson [ Sat Sep 17, 2011 1:43 pm ]
Post subject:  Re: My boat build pics
Is that one of the Seminole boats?
Author:  Woodiebuster [ Sat Sep 17, 2011 2:18 pm ]
Post subject:  Re: My boat build pics
Is it a flat bottom?

What size are those longitudinal braces?
Author:  downdabayou [ Sat Sep 17, 2011 2:26 pm ]
Post subject:  Re: My boat build pics
looking good!
Author:  cb5331 [ Sat Sep 17, 2011 2:30 pm ]
Post subject:  Re: My boat build pics
Author:  ibfishin [ Sun Sep 18, 2011 6:25 am ]
Post subject:  Re: My boat build pics
The longitudinal braces consist of (2) 2x2 square tubing, (2) 2x6 I beams, and (1) 2x6 rectangular tubing. My buddy had one built last season (minus the huntdeck) and it is one bad ass, sweet running rig. He runs a stock 35 MB and was getting 26-27 mph by himself 21-24 with a load. I'm slapping a 35 GTR on mine. If I see speeds similar to his I'll be happy. My old outboard duck boat had @the same speeds.

The hull is built by Alumitech Airboats of Orlando, Florida. It is the same place that built the Seminole Extreme aluminum hulls for Paul Dixon.

The bottom of the hull is very similar to the Gatortail Extreme, flat on the bottom with the stepped chine for handling. the rake has a slight V to knock the chop down since I run quite a bit of open water to get to my hunting areas.

Size is 17.5' x 48". The 48 is measured at the flat portion of the bottom.
Author:  bbb [ Sun Sep 18, 2011 8:10 am ]
Post subject:  My boat build pics
That looks nice. The Beefed up stringers, 6061 aluminum, spray in flotation under the floor.
You get what you pay for with these boats.

Mine ran 26-27 with a stock gdsd. I think you'll be happy with the speeds from the gt. You driving to LA to pick up the motor?

BTW. My buddy just put an order in for one and Pauls gonna let someone else build it for him. should be done in a few weeks. I'll post some pics when it shows up.
Author:  ibfishin [ Sun Sep 18, 2011 2:30 pm ]
Post subject:  Re: My boat build pics
I opted for no flotation, they said it is easy to add later if I feel the need. Calens Engine Service shipped the 35GTR to Alumitech for me.
Author:  diceman [ Sun Sep 18, 2011 7:23 pm ]
Post subject:  Re: My boat build pics
built like a battleship nice
Author:  slow motion 23 [ Sun Sep 18, 2011 8:39 pm ]
Post subject:  Re: My boat build pics
Nice looking rig, can't wait to get you back hunting on the lake with the rest of us
Author:  HUNT4DEER [ Mon Sep 19, 2011 10:24 am ]
Post subject:  Re: My boat build pics
they build IMO the best airboat hull out there. great service and a very strong product. been building airboats as long as i can remember, and im 42. and thats about all they do. thats a long time in one business only building airboats.
Author:  mucknaked [ Mon Sep 19, 2011 11:56 am ]
Post subject:  Re: My boat build pics
Nice boat- real balls II.
Author:  ibfishin [ Mon Sep 19, 2011 4:09 pm ]
Post subject:  Re: My boat build pics
Slow motion 23... Is that you Shannon. Ha Ha Jess. It will not be Reel Balls 2. Haven't come up with a name yet, and probably won't.
Author:  bbb [ Mon Sep 26, 2011 8:46 pm ]
Post subject:  My boat build pics
Any new pics?
Author:  bbb [ Wed Oct 12, 2011 10:11 am ]
Post subject:  Re: My boat build pics
Been almost a month and you've been quiet about it. Let's see the pics!
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/