Author |
Message |
Duckill01
MMT Member
Joined: Fri Jan 17, 2014 1:44 pm Posts: 7
|
Homemade surface drive
Has anyone built a similar motor? I would like to compare notes on performance. 10 h.p. Briggs, 4.5" top pulley and 3.5 bottom, 9"x6 mud prop, on 14/36.
You do not have the required permissions to view the files attached to this post.
|
Wed Jan 22, 2014 8:23 pm |
|
|
OlSchool
MMT Pro Member
Joined: Sun Jan 06, 2013 4:24 pm Posts: 384 Location: Louisiana
|
Re: Homemade surface drive
I have not built one yet but would like offer a little info. The larger sprocket should be on the bottom to increase your torque. The pods are probably hurting you. If you must have pods to help support the weight they should be higher than the bottom and angled up so they don't drag when you get on plane. Boats don't run perfectly flat.
|
Wed Jan 22, 2014 8:32 pm |
|
|
Duckill01
MMT Member
Joined: Fri Jan 17, 2014 1:44 pm Posts: 7
|
Re: Homemade surface drive
The picture doesn't show very good, but the pods are 1 1/2" from the bottom and are angled up in the back. It runs around 15 mph empty and if I trim it down it wants to kill the motor out. Switching will probably help, thank you.
|
Wed Jan 22, 2014 8:41 pm |
|
|
OlSchool
MMT Pro Member
Joined: Sun Jan 06, 2013 4:24 pm Posts: 384 Location: Louisiana
|
Re: Homemade surface drive
What is your top rpm right now
|
Wed Jan 22, 2014 8:57 pm |
|
|
JLACOUR
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:18 pm Posts: 4915 Location: Lake Jackson, TX
|
Re: Homemade surface drive
_________________ 37 PD EFI FPR 18x48 Tiller SOLD -- 36 PD EFI FPR 18x48 Stick Steer SOLD -- 27 PD FPR 16x36 Skiff
|
Wed Jan 22, 2014 9:12 pm |
|
|
Duckill01
MMT Member
Joined: Fri Jan 17, 2014 1:44 pm Posts: 7
|
Re: Homemade surface drive
Just guessing around 4000 to 5000. It will push 3 grown men, two boys, one dog, and gear ( with blind) aroun 10 m.p.h. Trimmed out just right with smooth water. Yes probably need a bigger boat or less people.
|
Wed Jan 22, 2014 9:19 pm |
|
|
Duckill01
MMT Member
Joined: Fri Jan 17, 2014 1:44 pm Posts: 7
|
Re: Homemade surface drive
Nice home build on the paddle boat. All you need is some camo!
|
Wed Jan 22, 2014 9:21 pm |
|
|
krogers
MMT 1000 Club
Joined: Fri Oct 29, 2010 8:24 am Posts: 1958 Location: Bristol, FL
|
Re: Homemade surface drive
_________________ 1754 GTB / 35 GTR
|
Thu Jan 23, 2014 1:35 pm |
|
|
SETx Longtail
MMT 1000 Club
Joined: Sun Sep 01, 2013 2:53 pm Posts: 3480 Location: Hardin County, Tx
|
Re: Homemade surface drive
Need to get a tach and tune that gear ratio a little... I bet with that and the right prop you'll have a runner!!
_________________ #CFFITR
-Custom pool noodle -stage 4 water wings
|
Thu Jan 23, 2014 1:39 pm |
|
|
Duckill01
MMT Member
Joined: Fri Jan 17, 2014 1:44 pm Posts: 7
|
Re: Homemade surface drive
Maybe more like 2500 to 3500. Yeah wrong prop for sure. I bought a long tail prop of course. What size and pitch prop does it need to be?
|
Thu Jan 23, 2014 1:45 pm |
|
|
txkingfisher
MMT 1000 Club
Joined: Fri Apr 26, 2013 1:09 am Posts: 1121 Location: SETX
|
Re: Homemade surface drive
Damn, I've facepalmed about 12 times on this thread already!
_________________ 13' Jefferson fiberglass skiff - 14 Copperhead
|
Thu Jan 23, 2014 2:26 pm |
|
|
Buzz Killington
MMT 1000 Club
Joined: Tue Jan 10, 2012 12:33 pm Posts: 2455
|
Re: Homemade surface drive
_________________ Support your troops - they support you
B. MacDonald
|
Sun Feb 02, 2014 6:22 am |
|
|
|