MudmotorTalk.com
http://www.mudmotortalk.com/mmt_v2/

Prodrive stage 3 36hp with a 1854 SeaArk MVSLD 70 HP 30 mph+
http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=18&t=10261
Page 1 of 1

Author:  sedlmayrje1723 [ Mon Jun 14, 2010 11:11 pm ]
Post subject:  Prodrive stage 3 36hp with a 1854 SeaArk MVSLD 70 HP 30 mph+

YOUTUBE VIDEOS OF BOAT
http://www.youtube.com/watch?v=mXrz7j766Ro
http://www.youtube.com/watch?v=2U4vJBHP8vs
http://www.youtube.com/watch?v=pb7ssvz7QTA
[youtube][/youtube]

Author:  quack addict [ Tue Jun 15, 2010 3:59 pm ]
Post subject:  Re: Prodrive stage 3 36hp with a 1854 SeaArk MVSLD 70 HP 30

that motor sure is a beast but why didn't you get hydro tilt n trim? gonna put all that $ into it, might as well make it easier to drive.

Author:  duckbill [ Tue Jun 15, 2010 6:49 pm ]
Post subject:  Re: Prodrive stage 3 36hp with a 1854 SeaArk MVSLD 70 HP 30

Can't the stock 35/36 hp motors push boats close to 30 mph or more?

Author:  sedlmayrje1723 [ Tue Jun 15, 2010 7:13 pm ]
Post subject:  Re: Prodrive stage 3 36hp with a 1854 SeaArk MVSLD 70 HP 30

Not a boat that is this big and wide, I am probably do for a new prop, but it is still a big ass boat with a lot of sh!t in it. It is damn fast instead putting dual motors on it.

Author:  brlcla [ Tue Jun 15, 2010 9:42 pm ]
Post subject:  Re: Prodrive stage 3 36hp with a 1854 SeaArk MVSLD 70 HP 30

who did your work???

Author:  radikkle [ Thu Jun 17, 2010 7:19 pm ]
Post subject:  Re: Prodrive stage 3 36hp with a 1854 SeaArk MVSLD 70 HP 30

I have a 1854 pd with a stock 36 that will run 28 when i had stage 3 it would run 38.but it only lasted for 30 min to a hour or 2 before it came apart each time.hope you have better luck than i did.

Author:  sedlmayrje1723 [ Thu Jun 17, 2010 8:26 pm ]
Post subject:  Re: Prodrive stage 3 36hp with a 1854 SeaArk MVSLD 70 HP 30

a guy in wisconsin on the east side. This motor has had 23 hours on the rebuild and no issues what so ever. Like I stated as well before there is a lot of extra weight in the boat. Plus Seaark is a heavy well-built flat bottom.

Author:  sedlmayrje1723 [ Thu Jun 17, 2010 8:26 pm ]
Post subject:  Re: Prodrive stage 3 36hp with a 1854 SeaArk MVSLD 70 HP 30

a guy in wisconsin on the east side. This motor has had 23 hours on the rebuild and no issues what so ever. Like I stated as well before there is a lot of extra weight in the boat. Plus Seaark is a heavy well-built flat bottom.

Author:  Gordie [ Mon Jul 05, 2010 7:58 pm ]
Post subject:  Re: Prodrive stage 3 36hp with a 1854 SeaArk MVSLD 70 HP 30

If I keep watching stuuf like this I'm gonna own a prodrive soon and we'll see how many upgrades it takes to push my lowe around

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/