MudmotorTalk.com
http://www.mudmotortalk.com/mmt_v2/

Wallisville 3.6.11
http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=18&t=16681		 Page 1 of 1
Author:  WestEndAngler [ Sun Mar 06, 2011 8:24 pm ]
Post subject:  Wallisville 3.6.11
I'll be adding more videos once I get them all uploaded.

[youtube]http://www.youtube.com/watch?v=g36hGROx56U[/youtube]

Yes, I have this crossing on the GoPro it's pretty crazy lol

[youtube]http://www.youtube.com/watch?v=uWhI7S_Z51Y[/youtube]

Here's an area that is normally full of water that I have to cross in order to get to some good mud. The water was so low there was no way I was risking going back there without anyone to give me a hand. The area is full of sand, shell & thick clay type mud. This video is unedited and no music. I came into the area and turned around, had to remove the bolt to trim the motor down.

[youtube]http://www.youtube.com/watch?v=xGG8LrC4Xb0[/youtube]
Author:  SmokeEater829 [ Sun Mar 06, 2011 8:32 pm ]
Post subject:  Re: Wallisville 3.6.11
Looks like alot of sand in that stuff. You gonna need a prop soon!!!!
Author:  TURBODRIVE [ Sun Mar 06, 2011 8:44 pm ]
Post subject:  Re: Wallisville 3.6.11
cool video, were you just sitting the gopro on your hunt deck, LOL
Author:  WestEndAngler [ Sun Mar 06, 2011 8:54 pm ]
Post subject:  Re: Wallisville 3.6.11
That's not the GoPro... I am putting that one together right now...
Author:  TURBODRIVE [ Sun Mar 06, 2011 9:02 pm ]
Post subject:  Re: Wallisville 3.6.11
ah, ok, well i saw you wiping the lense and the sound quality sounded like it
Author:  WestEndAngler [ Sun Mar 06, 2011 9:46 pm ]
Post subject:  Re: Wallisville 3.6.11
For someone reason I can't get the "16x9" format to work after I import my video.. I have some footage rendering right now hopefully YouTube will like the music I chose.
Author:  TURBODRIVE [ Sun Mar 06, 2011 9:56 pm ]
Post subject:  Re: Wallisville 3.6.11
Author:  WestEndAngler [ Sun Mar 06, 2011 9:59 pm ]
Post subject:  Re: Wallisville 3.6.11
Pearl Jam - Nothing Man only one I could find with similar play times :lol: It's 68% done rendering still have to upload to YouTube
Author:  TURBODRIVE [ Sun Mar 06, 2011 10:00 pm ]
Post subject:  Re: Wallisville 3.6.11
well i'll be here till 6 in da monin!
Author:  Woodiebuster [ Sun Mar 06, 2011 10:16 pm ]
Post subject:  Re: Wallisville 3.6.11
what was that drippin from around the starter?
Author:  WestEndAngler [ Sun Mar 06, 2011 10:17 pm ]
Post subject:  Re: Wallisville 3.6.11
I'm going to have to get on the phone with these Corel people you'd think you pay $60 and you would be able to make HD 16x9 1080P movies... It's now uploading to YouTube BTW
Author:  WestEndAngler [ Sun Mar 06, 2011 10:17 pm ]
Post subject:  Re: Wallisville 3.6.11
Author:  eljefe [ Sun Mar 06, 2011 10:24 pm ]
Post subject:  Re: Wallisville 3.6.11
He'll yea coe that's some bad mud......I could hear the shell.......if I would have been able to make it id have been in reverse the whole time :lol:
Author:  WestEndAngler [ Sun Mar 06, 2011 10:28 pm ]
Post subject:  Re: Wallisville 3.6.11
Author:  eljefe [ Sun Mar 06, 2011 10:35 pm ]
Post subject:  Re: Wallisville 3.6.11
It looked tough and with all the sand its hard to get moving.
Author:  WestEndAngler [ Sun Mar 06, 2011 10:41 pm ]
Post subject:  Re: Wallisville 3.6.11
Author:  eljefe [ Sun Mar 06, 2011 10:42 pm ]
Post subject:  Re: Wallisville 3.6.11
Hovercraft?
Author:  WestEndAngler [ Sun Mar 06, 2011 10:45 pm ]
Post subject:  Re: Wallisville 3.6.11
Well, here she is.... It's still processing for the next 10 minutes so you may not be able to immediately view it. I hope the audio didn't get taken out, if so I'm going to delete & redo it.


[youtube]http://www.youtube.com/watch?v=g36hGROx56U[/youtube]
Author:  WestEndAngler [ Sun Mar 06, 2011 10:54 pm ]
Post subject:  Re: Wallisville 3.6.11
Okay guys its 100% published, still processing video quality will improve...but you can now view it. ENJOY!
Author:  TURBODRIVE [ Sun Mar 06, 2011 11:00 pm ]
Post subject:  Re: Wallisville 3.6.11
great vid, yeah the 240p doesn't justify it
Author:  WestEndAngler [ Sun Mar 06, 2011 11:04 pm ]
Post subject:  Re: Wallisville 3.6.11
Y'all jump to YouTube & change the video quality settings to 720P HD, its some bad ass footage lol...I especially like me going over the pipeline crossing they had just dredged that a few months back moving pipe around and its so thick there it had never settled out :lol:
Author:  TURBODRIVE [ Sun Mar 06, 2011 11:11 pm ]
Post subject:  Re: Wallisville 3.6.11
it musta still been processing when i first viewed it, 240 was only available

just watched it in 780, awesome video

nice gator at 4:11

did you speed up the video, or were you just hauling that much arse?
Author:  WestEndAngler [ Sun Mar 06, 2011 11:15 pm ]
Post subject:  Re: Wallisville 3.6.11
I was hauling that much arse and headed North into the wind :lol: When I was coming down river (Trinity) I hit 34.8 MPH :lol: SOB is dialed in I tell yah! First time running with just me & GPS
Author:  WestEndAngler [ Sun Mar 06, 2011 11:16 pm ]
Post subject:  Re: Wallisville 3.6.11
Yeah I saw a few gators, that was the largest. The video of the GPS was filmed with my hand held camera so perhaps a different frame rate but they are all set to 30 FPS.
Author:  TURBODRIVE [ Sun Mar 06, 2011 11:22 pm ]
Post subject:  Re: Wallisville 3.6.11
you musta been on r4

r3 is bout the same quality just a lil wider resolution (not as tall as r4) and at 60fps incase you wanna slow it down at times.

you'll have it figured out before i will :lol:
Author:  WestEndAngler [ Sun Mar 06, 2011 11:30 pm ]
Post subject:  Re: Wallisville 3.6.11
Yeah r4 I shot SETX with r3
Author:  MeatWagon [ Mon Mar 07, 2011 2:27 am ]
Post subject:  Re: Wallisville 3.6.11
good video 8-)
Author:  WestEndAngler [ Mon Mar 07, 2011 8:04 am ]
Post subject:  Re: Wallisville 3.6.11
Author:  muddiejeep [ Mon Mar 07, 2011 10:09 am ]
Post subject:  Re: Wallisville 3.6.11
good videos
Author:  Woodiebuster [ Mon Mar 07, 2011 4:47 pm ]
Post subject:  Re: Wallisville 3.6.11
The music was horrible. :?
Author:  dozrya [ Mon Mar 07, 2011 8:32 pm ]
Post subject:  Re: Wallisville 3.6.11
Speaking of clams, you should see my skeg after the SETX run.
Author:  WestEndAngler [ Mon Mar 07, 2011 9:54 pm ]
Post subject:  Re: Wallisville 3.6.11
Author:  BradS [ Tue Mar 08, 2011 4:30 am ]
Post subject:  Re: Wallisville 3.6.11
The only down side to the go pro that I can see is there is no zoom --- Id like to buy one to film some hunts and mount it under the gun barrel but I dont know how well it would work @ 100 yards
Author:  WestEndAngler [ Tue Mar 08, 2011 7:11 am ]
Post subject:  Re: Wallisville 3.6.11
Author:  hosed46 [ Wed Apr 27, 2011 1:34 pm ]
Post subject:  Re: Wallisville 3.6.11
headed out there tomorrow... going to try and do some fishing and maybe mess around in the mud a little bit.
Author:  dakotaTX [ Mon May 23, 2011 2:15 pm ]
Post subject:  Re: Wallisville 3.6.11
I tried to PM you but its stuck in the outbox...I have been researching mud motors for a while now. You seem to be very pleased with your purchase, and that's about the same type of rig i'm looking for. I live in the Houston area and do most of my hunting and fishing from glaveston down to port oconnor. I have a couple of questions:

1. How shallow does your rig draft?
2. How skinny will it run on hard sand bottom, and how much water do you need to get on plan?
3. Did you buy the motor stock or did you modify?
4. Do you like the hydroturf? I was worried it would dryout or start turning everything black like a truck bedliner?
Author:  WestEndAngler [ Mon May 23, 2011 2:42 pm ]
Post subject:  Re: Wallisville 3.6.11
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/