| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| (help) mud buddy 4500 black death on 1652 FB http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=30615 |
Page 1 of 1 |
| Author: | jmarsh [ Mon Jul 09, 2012 5:38 pm ] |
| Post subject: | (help) mud buddy 4500 black death on 1652 FB |
i just orderd a 4500 black death to put on my 1652 welbuilt thats ribbed does anybody have any idea how it will work or if it will work on that boat or if thats to much motor for it |
|
| Author: | Quackkillz [ Mon Jul 09, 2012 6:15 pm ] |
| Post subject: | mud buddy 4500 black death on 1652 FB |
Is it an alweld or weld bilt? |
|
| Author: | jmarsh [ Mon Jul 09, 2012 6:21 pm ] |
| Post subject: | Re: (help) mud buddy 4500 black death on 1652 FB |
weldbuilt i get my boats mixed up all the time |
|
| Author: | Chico80x [ Mon Jul 09, 2012 6:53 pm ] |
| Post subject: | Re: (help) mud buddy 4500 black death on 1652 FB |
I think you'll be just fine. Expect to cruise somewhere around 25 mph or so. |
|
| Author: | jmarsh [ Mon Jul 09, 2012 7:55 pm ] |
| Post subject: | Re: (help) mud buddy 4500 black death on 1652 FB |
ok good thats what i was figureing but i wasnt sure how it was going to do with that much weight on the back of the boat or how it was going to do when turning because the transom is only rated for a 30hp but i have a metal shop so i can beef it up if i need to |
|
| Author: | Quackkillz [ Tue Jul 10, 2012 2:27 am ] |
| Post subject: | (help) mud buddy 4500 black death on 1652 FB |
I have a 31 hp mud buddy sd on a 1648 weld bilt and I know I don't have the hp you have I would think the weight wouldn't be much different being they are the same block and I do fine, my son and I with two ice chest loaded with red fish and trout still clocked 27.2 mph on gps. I did have a little porpoising problem when I first put that motor on it but that was easily fixed. I think you'll be fine with that motor on a 1652. |
|
| Author: | jmarsh [ Tue Jul 10, 2012 6:34 am ] |
| Post subject: | Re: (help) mud buddy 4500 black death on 1652 FB |
What kinda problem did you have |
|
| Author: | Quackkillz [ Thu Jul 12, 2012 11:55 pm ] |
| Post subject: | (help) mud buddy 4500 black death on 1652 FB |
| Author: | lacoonass [ Thu Jul 26, 2012 7:42 am ] |
| Post subject: | Re: (help) mud buddy 4500 black death on 1652 FB |
How'd you fix your porpoising problem quack? |
|
| Author: | SCmudder7071 [ Thu Jul 26, 2012 8:45 am ] |
| Post subject: | Re: (help) mud buddy 4500 black death on 1652 FB |
Add weight to the front is the simplest |
|
| Author: | zschne1 [ Thu Jul 26, 2012 9:28 am ] |
| Post subject: | Re: (help) mud buddy 4500 black death on 1652 FB |
| Author: | Birddogcollection [ Mon Feb 06, 2017 8:18 am ] |
| Post subject: | Re: (help) mud buddy 4500 black death on 1652 FB |
I have a Weldbilt 1652 .100 gauge vbow flat bottom ribbed with float pods from weldbilt on the boat. Looking at getting a Mudbuddy 44BD for the rig and was wondering if I'll be able to run full throttle without concerns. I want to get the most amount of power for the boat I can but I also want to be sure i'm not over-powering the hull. It is rated for a 50hp tiller or an 80hp remote steer. Thanks |
|
| Author: | 2eagles [ Thu Feb 09, 2017 7:10 am ] |
| Post subject: | Re: (help) mud buddy 4500 black death on 1652 FB |
I have a BD4500 on a 1655 Lowe Roughneck. Boat is a few year old when they were make heavy duty. Rated for 50 hp and weighs 600 lbs. it's a pretty good set up that carries a load pretty good and will run almost 30 with light load. Overall pretty happy. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|