MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
Bog hog short tail frame kit http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=6019 |
Page 1 of 1 |
Author: | slingshot [ Sat Nov 14, 2009 9:00 pm ] |
Post subject: | Bog hog short tail frame kit |
Does anyone know of anyone who bought this kit and how good is it would like to know Thanks . |
Author: | quackconsumer [ Sun Nov 15, 2009 2:41 pm ] |
Post subject: | Re: Bog hog short tail frame kit |
Lets do sum simple math. bog hog kit = $2,250 + $225 (estimated shipping) 35 hp briggs engine = $2,300 + $225 (estimated shipping) Total cost = $5,000 Standard 35 hp Go Devil = $5,200 Standard 36 hp Pro Drive = $5,300 Standard 35 hp Gator-Tail = $5,400 I'd go ahead and spend a few extra bucks for these reasons. 1. Sumone else is puttin it together. 2. Warranty. 3. Great customer service with a company dat stands behind their product. 4. Gettin a product dat has been tested by many, means you know what your gettin. Gettin good advice off of MMT = $$$$$ Priceless. |
Author: | mcnemar1982 [ Sun Nov 15, 2009 5:37 pm ] |
Post subject: | Re: Bog hog short tail frame kit |
Author: | slingshot [ Sun Nov 15, 2009 5:59 pm ] |
Post subject: | Re: Bog hog short tail frame kit |
Thanks guys for the advise but the reason i brought it up was because i have a 25 kohler motor all ready to go on a frame i dont need to buy the hole thing just a frame really dont care what brand, do any of you guys know of a brand that sells just a frame short tail only. |
Author: | duckmananderson [ Sun Nov 15, 2009 6:22 pm ] |
Post subject: | Re: Bog hog short tail frame kit |
Mud muddy sells them. |
Author: | bjg [ Sat Nov 21, 2009 2:17 pm ] |
Post subject: | Re: Bog hog short tail frame kit |
Author: | quackconsumer [ Sat Nov 21, 2009 4:23 pm ] |
Post subject: | Re: Bog hog short tail frame kit |
Author: | fishon!! [ Sat Nov 21, 2009 5:04 pm ] |
Post subject: | Re: Bog hog short tail frame kit |
if you wanna build one just go ahead nd fab it all your self. trust me you don't need a machine shop to fabricate metal. just a little common sense, wait, oh, nevermind....... |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |