It is currently Thu Mar 28, 2024 7:58 am




Reply to topic  [ 12 posts ] 
 .190 and/or poly for mudboats 
Author Message
MMT Pro Member

Joined: Wed Sep 16, 2015 11:50 am
Posts: 284
Post .190 and/or poly for mudboats
I run a shallow very rocky river and am tired of beating the piss out of my boat. I just put my 3rd hole in it this year running at idle speed down stream. There are a lot of round small boulders (which aren't an issue) but there are a ton of sharp edge slate chips that like to put gashes, catch weld seams and punch holes...... before you guys say don't run that water, ill say the duck hunting is totally worth the headache.

my hull is .100 which I realize isn't ideal for this water, but I'm considering getting a new hull to better handle the impacts and glancing. in my research a .190" (3/16) seems to be the general consensus for weight and durability. I have even seen some manufacturers put poly on the bottom of jet boats to help. Here is one manufacturer http://www.rockproofboats.com/hullconstruction.html

would mud boats work with poly? how much weight would it add? would just a .190 hull be goo enough?


Wed Dec 14, 2016 2:20 pm
Profile
MMT 1000 Club

Joined: Sun Dec 14, 2014 2:21 pm
Posts: 3214
Post Re: .190 and/or poly for mudboats


Wed Dec 14, 2016 4:33 pm
Profile
MMT Elite Member
User avatar

Joined: Mon Aug 02, 2010 8:39 pm
Posts: 6976
Location: West Monroe, LA
Post Re: .190 and/or poly for mudboats
I think poly wouldn't be a bad idea with all the rocks. I'm not familiar with it but I think it would be much easier to replace poly every few years rather than building a new boat!


Sent from my iPhone using Tapatalk


Thu Dec 15, 2016 7:15 am
Profile
MMT Pro Member

Joined: Thu Nov 08, 2012 2:32 pm
Posts: 261
Post Re: .190 and/or poly for mudboats
I know a guy in East Texas that runs poly on his boat. If I remember right he runs a river with rocks and put it on his boat for protection, he seemed to really like it.


Fri Jan 06, 2017 8:00 pm
Profile
MMT Pro Member

Joined: Wed Sep 16, 2015 11:50 am
Posts: 284
Post Re: .190 and/or poly for mudboats
^you know if that guy is on the forum?


Mon Jan 09, 2017 11:34 am
Profile
MMT Member

Joined: Thu Mar 05, 2015 8:58 pm
Posts: 30
Post Re: .190 and/or poly for mudboats
I'm interested in this as well. Was thinking about getting a custom boat built with 3/16" bottom and poly.


Mon Jan 30, 2017 8:02 pm
Profile
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: .190 and/or poly for mudboats
Another fantastic review!


Mon Jan 30, 2017 8:22 pm
Profile
MMT F.E.
User avatar

Joined: Wed Jan 28, 2009 6:34 pm
Posts: 978
Location: GA
Post Re: .190 and/or poly for mudboats
I have poly on the bottom of my 1860 Gator-tail.

Its nice and has held up quite well.


Tue Jan 31, 2017 10:37 am
Profile
MMT Sponsor
User avatar

Joined: Mon Jun 13, 2011 8:49 am
Posts: 3260
Post Re: .190 and/or poly for mudboats
:shock: GatorGlide DAMMIT! :lol:
In some applications poly is the only way to go. Gatorback had some good reviews a while back.

_________________
http://www.gatorglide.com/

gatorheads@comcast.net


Tue Jan 31, 2017 10:52 am
Profile WWW
MMT Pro Member

Joined: Wed Sep 16, 2015 11:50 am
Posts: 284
Post Re: .190 and/or poly for mudboats
don't worry frog! I'm going to be purchasing GG. getting my hull coated with 3/16" smooth polyuria and putting the GG over it like you said. I need to wait for it to be warmer than 15deg so I can apply it....


Tue Jan 31, 2017 11:54 am
Profile
MMT Pro Member
User avatar

Joined: Fri Aug 13, 2010 9:36 pm
Posts: 152
Location: Blountstown, FL
Post Re: .190 and/or poly for mudboats
My buddies airboat mechanic runs and installs stainless sheets on the bottom of his airboats. They fish Cedar Key and Homosassa. Shallow runs w/ rocks and oyster beds etc. He swears by it not sure on thickness or price but just a thought.

_________________
"A duck for a fuc* a fuc* for a duck and 25 bucks for a fuc*ed up duck"


Wed Feb 01, 2017 10:05 pm
Profile
MMT Sponsor
User avatar

Joined: Mon Jun 13, 2011 8:49 am
Posts: 3260
Post Re: .190 and/or poly for mudboats

_________________
http://www.gatorglide.com/

gatorheads@comcast.net


Thu Feb 02, 2017 8:52 am
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 12 posts ] 

Who is online

Users browsing this forum: No registered users and 253 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: