MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
45 & 48 mikuni http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=74532 |
Page 1 of 1 |
Author: | Pinhead pat [ Mon Sep 09, 2019 4:54 pm ] |
Post subject: | 45 & 48 mikuni |
Is it possible and or has anyone put on a mikuni hsr 45 or 48 carb? Sent from my iPhone using Tapatalk |
Author: | cb5331 [ Mon Sep 09, 2019 5:16 pm ] |
Post subject: | Re: 45 & 48 mikuni |
Yes it is possible. I have seen the 45's but not 48's. Sent from my SM-T710 using Tapatalk |
Author: | Pinhead pat [ Mon Sep 09, 2019 5:21 pm ] |
Post subject: | Re: 45 & 48 mikuni |
Im curious what else you would have to do and what its perks are. if anyone has done it your input would be great Sent from my iPhone using Tapatalk |
Author: | GNSPEED [ Mon Sep 09, 2019 5:32 pm ] |
Post subject: | Re: 45 & 48 mikuni |
As I recall it was way to much carb for even a full build a 167 main in 42mm covers most builds. |
Author: | cb5331 [ Mon Sep 09, 2019 5:40 pm ] |
Post subject: | Re: 45 & 48 mikuni |
The 42 is too big already. No need at all for the 45 or 48. Bps was giving people 45's when they were having trouble getting 42's. Sent from my SM-T710 using Tapatalk |
Author: | Russ [ Mon Sep 09, 2019 5:41 pm ] |
Post subject: | Re: 45 & 48 mikuni |
Dont bother. Off idle throttle gets worse even with the accel pump, and you'll run out of engine before you'll run out of carb with the 45. Prob have to have the engine to turn 6k+ under normal load to appreciate the 45. Maybe at 5700. #CFFITR #GhostBoat #Whoneedsphysicsihaveamudmotor |
Author: | banded-mallard [ Tue Sep 10, 2019 3:26 am ] |
Post subject: | Re: 45 & 48 mikuni |
Author: | Will [ Tue Sep 10, 2019 4:13 am ] |
Post subject: | Re: 45 & 48 mikuni |
Author: | Pinhead pat [ Tue Sep 10, 2019 6:45 am ] |
Post subject: | Re: 45 & 48 mikuni |
10-4 thanks yall Sent from my iPhone using Tapatalk |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |