Yep what ever speeds he says deduct 3 mph it's a formula you learn after knowing a bullshitter for a while just like when someone acts like super man then in reality there a treasure troll

This is a 15 pitch prop if I had a stock prop it would turn up more and run a lil better this prop was set up for a stage 3 with 200 pounds of compression I will be running with a stock prop hopefully this weekend to see results

bone stock GTR 35 on a 17-54 GTB runs 28-29 in deep water 30 in shallow hell my 16-54 xpress with my bone stock 35 GTR runs 27-28 deep water 29 shallow.....these speeds are with one person and 6 gallons of gas and battery and gun box no hunting load or fishing load

AKA you're a lying sack of shit. Nobody else is even stupid enough to post some left field chit like that without some proof not to mention every dickweed in five states would be copying that setup to a Tee. Better call for help cause your diggin the wrong way to get out of that hole.

I guess u build ur own valves and grind ur own cams and make ur own rods and pistons too r u just install those


Sent from my iPhone using

Scumbag been wrong about everydamnthing else today! Why stop now Niggerin up my yard anyway... This mutherfucker is RETARDED!!! Y'all sure it walks upright?

I have no issues telling a customer that I have there heads decked and valves and all done at a machine shop that's what there paying for quality work


Sent from my iPhone using

[quote="AKA Freshwaterkilla"]I guess u build ur own valves and grind ur own cams and make ur own rods and pistons too r u just install those


Sent from my iPhone using [/quote

No but I do port and polish my own heads and intake manifolds and adapters! I also have had to get back on the machines to get the work out that I has been piling up. My machine guy has fallen ill so I am back to doing it along with the owner of the shop. So to sum it up, yes I have been back to doing my own work.

That's great for u as much as u chg u should be pretty damn rich and why we are at it why do u make so many posts how mirror port finishes don't make power r flow more but every pic u seem to flaunt around u can see ur self in it and obivously the person standing behind u helping u


Sent from my iPhone using

Aka u been getting enough sleep. U seem delirious..

Mirror port finishes is what sells, is it needed? No. and if you really would know anything about head work you would know that lighting can make anything look different. So you really dont think I port my own heads? You my friend are a complete idiot!

And to think I even offered to help you build that motor that cody was fucking you on. No what do you do, you send Rob E over there to pick it up because you didnt have enough balls to go getyourself

So your saying my work dont work? Its funny that 2 of my stage2 motors made your stage 3 on race fuel look retarded. Yes your right my shit dont work.

Just a question. Won't some motors on certain boats be faster than other motors on say heavier boats?

You want to talk about talking shit and telling the truth. How was your motor running before you made a call to me on how to jet it before the Bayou Black run. And dont say that you ran your on jets for the run because you told me what jets you ran when you asked me for a plug check at the run.

Jamie callin da kid out on EVERYTHING BAWW!!!
Git em!!!!!

Damn I know boats with 4700 rev limits that run 34

i remember when aka said calen work was shit to bc "he didnt do his own work" to.

AKA doing what he does best
br.jpg

I mean really though lol. It's kinda funny cause everybody is arguing over 32-34 mph. I mean have anyone of y'all ever had an adrenaline rush from going 34 mph? I just want the mods to carry a load. Kinda hard to say my shit is fast when it only goes 34 mph if it even does. I mean 34 ain't fast anyway you look at it except on duck hunting boats.