| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Carb falling off http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=15964 |
Page 1 of 1 |
| Author: | Beadlejuicejr [ Mon Feb 07, 2011 7:36 pm ] |
| Post subject: | Carb falling off |
Figured out a lil thing that has kept my carb from falling off without putting a bracket on it. I pulled the carb off and used some rvt or rtv whatever it is haha, and put a big bead around the inside the boot that the carb slides into. Then put the carb back on and tightened the clamp. My carb would fall off everyday I went ride now it's been on for a month and haven't had it fall off yet. Just a lil something I figured I would share with y'all |
|
| Author: | garrettpearce [ Mon Feb 07, 2011 8:38 pm ] |
| Post subject: | Re: Carb falling off |
need to do that to mine |
|
| Author: | autogateman [ Mon Feb 07, 2011 9:01 pm ] |
| Post subject: | Re: Carb falling off |
my mill is back up and running, i should have pics of the new carb support brackets up tomorrow! |
|
| Author: | take'emgator [ Mon Feb 07, 2011 9:26 pm ] |
| Post subject: | Re: Carb falling off |
Ima get one from you Auto! |
|
| Author: | Beadlejuicejr [ Mon Feb 07, 2011 10:09 pm ] |
| Post subject: | Re: Carb falling off |
Heck I'll get one from you too just to be on the safeside. cuz when you look back and don't see ur carb ur heart will drop to ur feet sometime |
|
| Author: | deadbird8 [ Tue Feb 08, 2011 6:06 am ] |
| Post subject: | Re: Carb falling off |
It will work as long as you don't need to take the carb off for adjustments. Have heard that once the carb has been falling off, the best remedy was to get a new rubber flange and add a mechanical stabalizer. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|