MudmotorTalk.com
http://www.mudmotortalk.com/mmt_v2/

Getting a muffler shop to desgin a new exhaust.. any ideas?
http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=17200		 Page 1 of 1
Author:  Brasso [ Fri Mar 25, 2011 2:27 pm ]
Post subject:  Getting a muffler shop to desgin a new exhaust.. any ideas?
The original pipe on the longtail is rusing real bad, so im bringing it to a muffler shop and cutting off the stock stuff, and getting them to put new pipe on.. Any ideas on design?

Im thinking about just doing a crossover design, like bps, but I dont think I would have enough back pressure with that..

That and pipe coming off the heads and crossing each other, then facing away from the boat, then turning down.. Just trying to get more ideas.. Anyone?
Author:  med [ Fri Mar 25, 2011 4:06 pm ]
Post subject:  Re: Getting a muffler shop to desgin a new exhaust.. any ide
send this guy an email and find out what these are and buy a couple. doesnt sound too bad.

[youtube]http://www.youtube.com/watch?v=ugMqGAUercU[/youtube]
Author:  brlcla [ Fri Mar 25, 2011 4:41 pm ]
Post subject:  Re: Getting a muffler shop to desgin a new exhaust.. any ide
???? I would not want to cut grass all day long with exhaust blowing in my face...... kinda stupid if you ask me
Author:  med [ Fri Mar 25, 2011 4:46 pm ]
Post subject:  Re: Getting a muffler shop to desgin a new exhaust.. any ide
yup
Author:  Brasso [ Fri Mar 25, 2011 5:48 pm ]
Post subject:  Re: Getting a muffler shop to desgin a new exhaust.. any ide
It wouldent be blowing in my face it'd be facing the back of the boat. Thanks for chiming in and giving your much wanted opinion.. It really helped!
Author:  med [ Fri Mar 25, 2011 5:53 pm ]
Post subject:  Re: Getting a muffler shop to desgin a new exhaust.. any ide
he was talkin about the vid.
Author:  backwaterballer [ Fri Mar 25, 2011 6:02 pm ]
Post subject:  Re: Getting a muffler shop to desgin a new exhaust.. any ide
Back pressure won't be an issue I run dual pipes on my long tail and took the baffles out so the are basically straight pipes sounds really good and performs well also.
Author:  brlcla [ Fri Mar 25, 2011 6:04 pm ]
Post subject:  Re: Getting a muffler shop to desgin a new exhaust.. any ide
Author:  backwaterballer [ Fri Mar 25, 2011 7:39 pm ]
Post subject:  Re: Getting a muffler shop to desgin a new exhaust.. any ide
It would be a whole lot cooler if it did cut grass
Author:  Brasso [ Fri Mar 25, 2011 7:42 pm ]
Post subject:  Re: Getting a muffler shop to desgin a new exhaust.. any ide
I didint watch the vid phone wouldent let me watch it, my apologies brl...

Backwaterballer, do you mind posting some pics of your exhaust? Or you can text them , (903)780-6999
Author:  cb5331 [ Fri Mar 25, 2011 7:47 pm ]
Post subject:  Re: Getting a muffler shop to desgin a new exhaust.. any ide
Author:  backwaterballer [ Fri Mar 25, 2011 8:17 pm ]
Post subject:  Re: Getting a muffler shop to desgin a new exhaust.. any ide
Ya I'll have to take some pics I don't have any on new phone
Author:  Brasso [ Fri Mar 25, 2011 8:24 pm ]
Post subject:  Re: Getting a muffler shop to desgin a new exhaust.. any ide
So back pressure really isint a big deal?
Author:  backwaterballer [ Fri Mar 25, 2011 8:28 pm ]
Post subject:  Re: Getting a muffler shop to desgin a new exhaust.. any ide
No alot of the guy cut the stock exhaust open and knock the baffles out and weld it back up.
Author:  Brasso [ Mon Mar 28, 2011 1:25 pm ]
Post subject:  Re: Getting a muffler shop to desgin a new exhaust.. any ide
Its got the muffler that goes to the side.. its just pipe all the way to the right side which goes into a small square muffler.
Author:  med [ Thu Mar 31, 2011 3:29 pm ]
Post subject:  Re: Getting a muffler shop to desgin a new exhaust.. any ide
Well? Find out anything ?
Author:  Brasso [ Thu Mar 31, 2011 4:33 pm ]
Post subject:  Re: Getting a muffler shop to desgin a new exhaust.. any ide
Haven't had time to do anything
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/