It is currently Tue Jul 15, 2025 1:24 pm




Reply to topic  [ 33 posts ] 
 Upgrade suggestions for batter terminal connections:Video+ 
Author Message
MMT Super Elite Member
User avatar

Joined: Tue Jun 29, 2010 1:20 pm
Posts: 11166
Location: Cecilia, LA
Post Upgrade suggestions for batter terminal connections:Video+
I burned the shiat out of my fingers this morning when I tried to tighten the wing nut on my battery terminal. My GTR23 with the decked heads and performance cam requires me to "pump" my starter to turn over the engine to start. This heats up my battery connections. I have one batter (a good one) to which my lights, starter and trim are connected. Do ya'll have recommendations to eliminate this issue...ie terminals and wires getting hot...larger cables, terminal adapters to accommodate multiple connections (right now they're just stacked on top of one another.). Thanks.

_________________
Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI.
“Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.


Wed Nov 16, 2011 12:59 pm
Profile WWW
MMT F.E.
User avatar

Joined: Tue Jan 25, 2011 5:47 pm
Posts: 886
Location: Plaquemine
Post Re: Upgrade suggestions for batter terminal connections
Terminals shouldn't b getting too hot to touch, no matter how much compression your engine got. U have a connection that is loose. If the cable is crimped to the battery connector u should solder it. U need 2 check the wingnuts often too cause they will loosen up.

_________________
18'x54"CC Hanko/ 36PD


Wed Nov 16, 2011 2:00 pm
Profile
MMT Super Elite Member
User avatar

Joined: Tue Jun 29, 2010 1:20 pm
Posts: 11166
Location: Cecilia, LA
Post Re: Upgrade suggestions for batter terminal connections
I tighten those mothers as tightly as can be with pliers and they still loosen. I think I'll switch to compression fittings. Here's a picture of my burned thumb.

_________________
Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI.
“Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.


Wed Nov 16, 2011 2:12 pm
Profile WWW
MMT Sponsor

Joined: Tue May 24, 2011 6:43 am
Posts: 1604
Post Re: Upgrade suggestions for batter terminal connections


Wed Nov 16, 2011 2:14 pm
Profile
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: Upgrade suggestions for batter terminal connections
I swear you are fucking retarded. Why didn't you fix this 6 months ago when you started having the problem? You are gonna wear that starter out if you don't fix it. You don't have anywhere near enough compression to put a strain on that starter. It's still a wiring or battery issue, just like it was when you started having problems.


Wed Nov 16, 2011 3:03 pm
Profile
MMT Super Elite Member
User avatar

Joined: Tue Jun 29, 2010 1:20 pm
Posts: 11166
Location: Cecilia, LA
Post Re: Upgrade suggestions for batter terminal connections

_________________
Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI.
“Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.


Wed Nov 16, 2011 3:31 pm
Profile WWW
MMT Super Elite Member
User avatar

Joined: Tue Jun 29, 2010 1:20 pm
Posts: 11166
Location: Cecilia, LA
Post Re: Upgrade suggestions for batter terminal connections

_________________
Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI.
“Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.


Wed Nov 16, 2011 5:11 pm
Profile WWW
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: Upgrade suggestions for batter terminal connections


Wed Nov 16, 2011 5:25 pm
Profile
MMT 1000 Club
User avatar

Joined: Tue Jan 13, 2009 8:02 pm
Posts: 4534
Location: South Louisiana
Post Re: Upgrade suggestions for batter terminal connections
Hey guidry,Take it to a welding shop and get them to weld that shit to your battery :lol:

_________________
17/54 GT EXTREME Center Console, Huntdeck w/ GTR 35

Hoyt Mods and some other goodies


Wed Nov 16, 2011 5:32 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
Post Upgrade suggestions for batter terminal connections
At least the battery didn't explode in your face.

_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc


Wed Nov 16, 2011 5:51 pm
Profile
MMT Super Elite Member
User avatar

Joined: Tue Jun 29, 2010 1:20 pm
Posts: 11166
Location: Cecilia, LA
Post Re: Upgrade suggestions for batter terminal connections

_________________
Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI.
“Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.


Wed Nov 16, 2011 5:59 pm
Profile WWW
MMT Pro Member

Joined: Fri Nov 05, 2010 11:23 pm
Posts: 216
Post Re: Upgrade suggestions for batter terminal connections
Put some blue loctite on the wingnuts. That should keep them from backing off but you have an issue somewhere else if it is takig it that long to fire up.

CB come on man you didn't have to call the guy a tard :-)


Wed Nov 16, 2011 6:47 pm
Profile
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: Upgrade suggestions for batter terminal connections


Wed Nov 16, 2011 6:54 pm
Profile
MMT Pro Member

Joined: Fri Nov 05, 2010 11:23 pm
Posts: 216
Post Re: Upgrade suggestions for batter terminal connections


Wed Nov 16, 2011 7:11 pm
Profile
MMT 1000 Club
User avatar

Joined: Tue Jan 13, 2009 8:02 pm
Posts: 4534
Location: South Louisiana
Post Re: Upgrade suggestions for batter terminal connections
Guidry knows that cb is just giving him a shit!Hunting season makes him mean!

_________________
17/54 GT EXTREME Center Console, Huntdeck w/ GTR 35

Hoyt Mods and some other goodies


Wed Nov 16, 2011 7:24 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
Post Upgrade suggestions for batter terminal connections
Don't forget his profession. Don't blame him. Attorneys never admit guilt. :lol:

_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc


Wed Nov 16, 2011 7:30 pm
Profile
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: Upgrade suggestions for batter terminal connections


Wed Nov 16, 2011 7:38 pm
Profile
MMT Super Elite Member
User avatar

Joined: Tue Jun 29, 2010 1:20 pm
Posts: 11166
Location: Cecilia, LA
Post Re: Upgrade suggestions for batter terminal connections
Cb you have a sick relationship with engines. You care more about how an electrical issue will affect my engine than you do about my burned finger. I think that describes how you relate to most people in your life. Just sayin.. I still like you.

_________________
Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI.
“Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.


Wed Nov 16, 2011 11:29 pm
Profile WWW
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: Upgrade suggestions for batter terminal connections
Actually, I don't give a shit about your engine or your finger. Just saying we tried to help you with this problem a while back and warned you that bad things could happen. You chose to ignore the help and now you've burned yourself. You burned yourself because you are an idiot. :lol: Why would you think that any one of us care about you burning your finger, anyway? :lol:


Thu Nov 17, 2011 10:35 am
Profile
MMT Super Elite Member
User avatar

Joined: Tue Jun 29, 2010 1:20 pm
Posts: 11166
Location: Cecilia, LA
Post Re: Upgrade suggestions for batter terminal connections

_________________
Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI.
“Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.


Thu Nov 17, 2011 12:14 pm
Profile WWW
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: Upgrade suggestions for batter terminal connections
:lol: Maybe I do care. I think you should be locked in a padded room. That's probably more for other people's saftey than yours though. Guess I still don't give a shit about you. :lol:


Thu Nov 17, 2011 1:14 pm
Profile
MMT Elite Member
User avatar

Joined: Wed Jan 14, 2009 7:23 am
Posts: 6233
Location: Tarkington, TX
Post Re: Upgrade suggestions for batter terminal connections
Don't let them connections get too hot for cypress knee! wood + heat = Whoooofff

_________________
Bayou Surface Drive
337-351-0362
Tarkington, TX 77327


Thu Nov 17, 2011 1:18 pm
Profile
MMT Super Elite Member
User avatar

Joined: Tue Jun 29, 2010 1:20 pm
Posts: 11166
Location: Cecilia, LA
Post Re: Upgrade suggestions for batter terminal connections

_________________
Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI.
“Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.


Thu Nov 17, 2011 1:28 pm
Profile WWW
MMT Super Elite Member
User avatar

Joined: Tue Jun 29, 2010 1:20 pm
Posts: 11166
Location: Cecilia, LA
Post Re: Upgrade suggestions for batter terminal connections: UPD
Update photo of my burns


_________________
Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI.
“Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.


Thu Nov 17, 2011 1:39 pm
Profile WWW
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: Upgrade suggestions for batter terminal connections


Thu Nov 17, 2011 1:41 pm
Profile
MMT Elite Member
User avatar

Joined: Wed Jan 14, 2009 7:23 am
Posts: 6233
Location: Tarkington, TX
Post Re: Upgrade suggestions for batter terminal connections: UPD
Fuggin water blisters.... Pop them suckas and put some neosporin on dat. DG got your tire fixed?

_________________
Bayou Surface Drive
337-351-0362
Tarkington, TX 77327


Thu Nov 17, 2011 1:52 pm
Profile
MMT Super Elite Member
User avatar

Joined: Tue Jun 29, 2010 1:20 pm
Posts: 11166
Location: Cecilia, LA
Post Re: Upgrade suggestions for batter terminal connections: UPD
[youtube]http://www.youtube.com/watch?v=AzHfVSRc5sU[/youtube]

_________________
Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI.
“Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.


Thu Nov 17, 2011 2:06 pm
Profile WWW
MMT Super Elite Member
User avatar

Joined: Tue Jun 29, 2010 1:20 pm
Posts: 11166
Location: Cecilia, LA
Post Re: Upgrade suggestions for batter terminal connections: UPD

_________________
Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI.
“Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.


Thu Nov 17, 2011 2:32 pm
Profile WWW
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: Upgrade suggestions for batter terminal connections:Vide
:lol: I just noticed the video. You are definitely retarded. :lol:


Thu Nov 17, 2011 8:50 pm
Profile
MMT Pro Member

Joined: Fri Nov 05, 2010 11:23 pm
Posts: 216
Post Re: Upgrade suggestions for batter terminal connections:Vide


Thu Nov 17, 2011 10:08 pm
Profile
MMT Moderator
User avatar

Joined: Thu Mar 05, 2009 9:11 am
Posts: 9143
Location: Houston | Surfside
Post Upgrade suggestions for batter terminal connections:Video+
Was he using burnt finger? :lol:

_________________
GTB 1860 w/ 2019 GTR40XD-HO


Thu Nov 17, 2011 10:32 pm
Profile WWW
MMT Super Elite Member
User avatar

Joined: Tue Jun 29, 2010 1:20 pm
Posts: 11166
Location: Cecilia, LA
Post Re: Upgrade suggestions for batter terminal connections:Vide
New terminal connections installed. Problem solved!!! Thanks CB.

_________________
Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI.
“Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.


Sun Nov 20, 2011 7:48 pm
Profile WWW
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: Upgrade suggestions for batter terminal connections:Vide
Now I can sleep at night knowing that you are safe...


Sun Nov 20, 2011 8:07 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 33 posts ] 

Who is online

Users browsing this forum: No registered users and 136 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: