MudmotorTalk.com
http://www.mudmotortalk.com/mmt_v2/

Prodrive Hydraulic Reverse Gear
http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=29771
Page 1 of 1

Author:  Will [ Fri Jun 08, 2012 6:27 am ]
Post subject:  Prodrive Hydraulic Reverse Gear

It appears when you have the hydraulic reverse, the lower unit soley relies on the reverse gear to hold it in place. I have already had to "jump" a tooth to get the play out of the lower unit from the last 2 teeth catching abuse. I was wondering if I put in a reverse pin if it would stop this from happening. I know it will add a step to the reverse process and whats the point of hydraulic reverse if you have to pull a pin but this seems to be an issue.

Opinions....?

Author:  OwenDickeson [ Fri Jun 08, 2012 7:49 am ]
Post subject:  Prodrive Hydraulic Reverse Gear

Call Peck.

Author:  mizzippi jb [ Fri Jun 08, 2012 8:00 am ]
Post subject:  Re: Prodrive Hydraulic Reverse Gear

Or autogateman

Author:  OwenDickeson [ Fri Jun 08, 2012 9:01 am ]
Post subject:  Prodrive Hydraulic Reverse Gear

Why??

Author:  The Shafer [ Fri Jun 08, 2012 9:15 am ]
Post subject:  Re: Prodrive Hydraulic Reverse Gear


Author:  Will [ Fri Jun 08, 2012 10:29 am ]
Post subject:  Re: Prodrive Hydraulic Reverse Gear

Are you saying to call them for a pin? If so, that's fine but has anyone else had this issue or do you think this would help protect the reverse gear?

Author:  The Shafer [ Fri Jun 08, 2012 11:04 am ]
Post subject:  Re: Prodrive Hydraulic Reverse Gear

I'm saying (and I also believe Owen is saying) is to call Peck and tell him the problem you are having with the gears. He will tell you the best solution to your problem.

Author:  Will [ Fri Jun 08, 2012 12:17 pm ]
Post subject:  Re: Prodrive Hydraulic Reverse Gear

I just looked and the pin wont help. Im waiting to hear back from kp.

Author:  OwenDickeson [ Fri Jun 08, 2012 1:21 pm ]
Post subject:  Prodrive Hydraulic Reverse Gear

I'm saying call them because something is not right, no need to ****** rig it.

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/