MudmotorTalk.com
http://www.mudmotortalk.com/mmt_v2/

GTR 35 mounting bracket ?'s
http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=30276		 Page 1 of 1
Author:  Nate [ Mon Jun 25, 2012 5:10 pm ]
Post subject:  GTR 35 mounting bracket ?'s
Having some transom wedges made and don't have access to a Gatortail right now. Hoping someone could help me out with some measurements. I need;

Saddle opening width

Bracket height from inside of saddle down

Width of individual bracket "legs"

How far down are the through hull mounting bolts from the top of the saddle?

Thanks!
Author:  Nate [ Tue Jun 26, 2012 5:36 pm ]
Post subject:  Re: GTR 35 mounting bracket ?'s
bump
Author:  bubba777 [ Tue Jun 26, 2012 6:58 pm ]
Post subject:  Re: GTR 35 mounting bracket ?'s
Hey I am at work when I get home I get you the measurements buddy it will be about 10 in the morning I work nights
Author:  elebouef102 [ Tue Jun 26, 2012 7:06 pm ]
Post subject:  Re: GTR 35 mounting bracket ?'s
saddle opening width 2 7/8 inch

bracket height from inside of saddle down
7 inch back
3 inches front

Width of individual bracket legs 1 inch

How far down are the thru hull mounting bolts from top of saddle 8 inches

Now you got to remember when I use a tape measure I still count it as example. 1 inch and 4 lil marks :lol:

Feel free to wait and get Bubba's measurement as a back up
Author:  Nate [ Tue Jun 26, 2012 7:33 pm ]
Post subject:  Re: GTR 35 mounting bracket ?'s
Thanks for the help guys

Just to confirm the through hull bolt measurement....if you were to measure down the transom how far down are they? I may not have worded it the best first try...

Thanks again!
Author:  elebouef102 [ Tue Jun 26, 2012 7:58 pm ]
Post subject:  Re: GTR 35 mounting bracket ?'s
4 1/2 inches
Author:  Nate [ Wed Jun 27, 2012 4:40 am ]
Post subject:  Re: GTR 35 mounting bracket ?'s
thanks
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/