| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| mikuni prob http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=31416 |
Page 1 of 1 |
| Author: | gmc [ Fri Aug 10, 2012 10:25 pm ] |
| Post subject: | mikuni prob |
motor idles and takes off great but when i trim down the slitest bit she stalls or kills. I also noticed the other day a film on my reverse plate at WOT so i looked over and noticed gas pourin out the over flow and the.bottom of the air filter was soaked with fuel. was wonderin wat i guys think? |
|
| Author: | take'emgator [ Sat Aug 11, 2012 5:33 am ] |
| Post subject: | Re: mikuni prob |
your float tab needs to be bent up a little, your bowl is over filling. |
|
| Author: | gmc [ Sat Aug 11, 2012 9:00 pm ] |
| Post subject: | Re: mikuni prob |
which way are u suppose to bend it? never rlly messed with one before |
|
| Author: | autogateman [ Sat Aug 11, 2012 9:58 pm ] |
| Post subject: | Re: mikuni prob |
up. and VERY small increments at a time |
|
| Author: | BoatDR [ Mon Aug 13, 2012 8:11 am ] |
| Post subject: | Re: mikuni prob |
adjust it to the measurement on page 8 http://www.mikuni.com/pdf/hsr_tuningmanual_021003.pdf |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|