It is currently Thu Mar 28, 2024 10:09 am




Reply to topic  [ 6 posts ] 
 mudbuddy outdrive rebuild 
Author Message
MMT Pro Member

Joined: Mon Jan 11, 2010 6:50 pm
Posts: 121
Post mudbuddy outdrive rebuild
anybody know how to go about replacing bearings and such on an older mudbuddy hyper?? have searched with no luck. Thanks


Sat Nov 17, 2012 9:59 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Feb 04, 2009 7:50 pm
Posts: 3833
Location: Old East Dallas, Texas
Post Re: mudbuddy outdrive rebuild
Look on the MB forum, there are detailed posts on it. There are exploded drawings of the outdrive on the MB customer page off its main page.

BoatDr should have all the bearings, races and seals.

_________________
Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that


Sat Nov 17, 2012 4:32 pm
Profile
MMT Pro Member

Joined: Mon Jan 11, 2010 6:50 pm
Posts: 121
Post Re: mudbuddy outdrive rebuild
Thanks for the reply DB. I looked on the mudbuddy forum and site and all I can find is just basically how to pull the gears off. No detailed info on how to actually remove the shaft from the lower unit. Seems like my lower unit has bad bearings opposite of the prop side of the shaft.


Sat Nov 17, 2012 7:30 pm
Profile
MMT Pro Member

Joined: Tue Feb 03, 2009 7:36 pm
Posts: 74
Post Re: mudbuddy outdrive rebuild
Remove the out drive according to DB8 detailed posts. Remove the prop, real seal and rear threaded race. Remove the gear ( look at some of Db8 pictures), spacer and front race. Remove the retaining clip and oil seal. Pull the stainless drive shaft out. Use a long 3/4 dowel rod to beat the bearings out.


Sent from my iPad using Tapatalk HD


Sat Nov 17, 2012 8:44 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Feb 04, 2009 7:50 pm
Posts: 3833
Location: Old East Dallas, Texas
Post Re: mudbuddy outdrive rebuild

_________________
Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that


Sat Nov 17, 2012 11:25 pm
Profile
MMT Pro Member

Joined: Mon Jan 11, 2010 6:50 pm
Posts: 121
Post Re: mudbuddy outdrive rebuild
Thanks I finally found it and got it done. Bearings on transom side completely shot.


Sun Nov 18, 2012 2:55 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 249 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron