| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Need a little help with tiller torq http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=38440 |
Page 1 of 1 |
| Author: | Jayme_B [ Wed Mar 06, 2013 9:06 pm ] |
| Post subject: | Need a little help with tiller torq |
I just got my boat 1654 gtb w/ 35gtr the skeg is already bent a little to the left but there is still quite a bit of torq. The tiller handle pushes into me. Should I bend it a little more or what's the next option to fix it? |
|
| Author: | msm8281 [ Wed Mar 06, 2013 9:10 pm ] |
| Post subject: | Re: Need a little help with tiller torq |
Leave like it is for now. Try adjusting the weight in the boat. Sent from my SAMSUNG-SGH-I547 using Tapatalk 2 |
|
| Author: | Gameover [ Wed Mar 06, 2013 9:12 pm ] |
| Post subject: | Re: Need a little help with tiller torq |
I bent the shit out of mine and it fixed it |
|
| Author: | ibfishin [ Wed Mar 06, 2013 9:14 pm ] |
| Post subject: | Re: Need a little help with tiller torq |
| Author: | Team Camo [ Wed Mar 06, 2013 9:17 pm ] |
| Post subject: | Re: Need a little help with tiller torq |
After rearranging the weight in the boat & it not helping, bend it some more. |
|
| Author: | Beadlejuicejr [ Wed Mar 06, 2013 9:20 pm ] |
| Post subject: | Re: Need a little help with tiller torq |
Bend it more anyway they aren't bent that much to kill it all but mostly man up it's not that bad. |
|
| Author: | ibfishin [ Wed Mar 06, 2013 9:25 pm ] |
| Post subject: | Re: Need a little help with tiller torq |
I left mine just so the tiller handle pushes slightly towards the starboard side of the boat. Then when I'm running I just let the tiller rest against my leg. When I first got the boat it pushed against my leg so hard it left a really bad bruise. After a little adjustment it is perfect and didn't affect the performance. Sent from my ADR6350 using Tapatalk 2 |
|
| Author: | Jayme_B [ Wed Mar 06, 2013 9:29 pm ] |
| Post subject: | Re: Need a little help with tiller torq |
Yea I just had to nut up and get nasty with it today but it's pretty stiff I might have to bend it a little more tho cause its a open hull and the gas is on the opposite side from me so I can't shift much more weight around |
|
| Author: | cupped up [ Wed Mar 06, 2013 9:42 pm ] |
| Post subject: | Re: Need a little help with tiller torq |
| Author: | Jayme_B [ Thu Mar 07, 2013 8:08 am ] |
| Post subject: | Re: Need a little help with tiller torq |
Should i just bend the tab that's already bent a little or bend the bottom tab too? And what have yall found to be the best tool to use to bend it? |
|
| Author: | rob_E [ Thu Mar 07, 2013 8:23 am ] |
| Post subject: | Re: Need a little help with tiller torq |
just bend the one that is already bent I bent mine with a big ass crescent wrench |
|
| Author: | Jayme_B [ Thu Mar 07, 2013 8:46 am ] |
| Post subject: | Re: Need a little help with tiller torq |
Alright thanks. That is what I was figuring I probably needed something I can get some leverage with lol |
|
| Author: | Pirogue [ Thu Mar 07, 2013 12:08 pm ] |
| Post subject: | Re: Need a little help with tiller torq |
15 in Crescent is what I used |
|
| Author: | ibfishin [ Thu Mar 07, 2013 6:48 pm ] |
| Post subject: | Re: Need a little help with tiller torq |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|