| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Exhaust http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=39550 |
Page 1 of 1 |
| Author: | banded-mallard [ Tue Apr 09, 2013 12:43 pm ] |
| Post subject: | Exhaust |
All these threads about exhaust cracking due to thin stainless. Didn't read many stockers (carbon steel ) cracking, just rusting out. So, has anybody tried or is it even possible to run a galvanized exhaust. Or is the temps to hot, and the zinc would just flash off. |
|
| Author: | CLICKSTER [ Tue Apr 09, 2013 2:19 pm ] |
| Post subject: | Re: Exhaust |
I had two stock exhaust flanges crack. I have probably had the worse luck with exhaust cracking out of three exhaust... Stock cracked both sides, Marshmellow cracked left side 4 times, and BPS crossover cracked 2 times till i had BPS send me bracing hardwear for it. since then i havent cracked crap except my transome, and trailer eye. |
|
| Author: | banded-mallard [ Tue Apr 09, 2013 2:32 pm ] |
| Post subject: | Re: Exhaust |
^^^ yeah, I'd call that pretty shitty luck |
|
| Author: | CLICKSTER [ Tue Apr 09, 2013 2:36 pm ] |
| Post subject: | Re: Exhaust |
Yea, with a total of close to 70 hrs. |
|
| Author: | instagator911 [ Tue Apr 09, 2013 2:37 pm ] |
| Post subject: | Re: Exhaust |
| Author: | CLICKSTER [ Tue Apr 09, 2013 2:38 pm ] |
| Post subject: | Re: Exhaust |
|
|
|
| Author: | Bigrich [ Tue Apr 09, 2013 7:19 pm ] |
| Post subject: | Re: Exhaust |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|