| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Honda gx630 kill switch http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=40138 |
Page 1 of 1 |
| Author: | ottertailriverrunner [ Sun Apr 28, 2013 2:07 pm ] |
| Post subject: | Honda gx630 kill switch |
Swapped out my 16 vanguard on my gd for a new gx630 honda. Swap was easy, everything lined up, shaft is centered and is giving off less heat than the 16 was. Now the problem. The only place I can find to link the kill switch is the low oil shut off. I'm not an electrician. When I piggyback them together the kill switch works as it should. My question is am I going to do any harm to the electrical system by linking them together?? I would think it would be no different than the low oil sensor shutting the motor. down? I hope to never have to use the kill tether, but don't dare run it with out it. Thanks for any input. |
|
| Author: | postalpaul [ Sun Apr 28, 2013 2:28 pm ] |
| Post subject: | Re: Honda gx630 kill switch |
I think you'll be fine If it warrants any more discussion I can pull a print for my gx670 should be really close |
|
| Author: | ottertailriverrunner [ Sun Apr 28, 2013 3:06 pm ] |
| Post subject: | Re: Honda gx630 kill switch |
^^^^ Thanks!^^^^ |
|
| Author: | postalpaul [ Mon Apr 29, 2013 7:42 pm ] |
| Post subject: | Re: Honda gx630 kill switch |
I found that electrical print if you want a copy of it Hit me with a pm of email or cell # |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|