Yes u will don't cut them off u can cut the cavitation plate off though it's pointless
Sent from the baddest mudmotor out there
| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| GDSD Trim Tabs http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=48036 |
Page 1 of 1 |
| Author: | DeltaRunner [ Thu Dec 05, 2013 11:47 pm ] |
| Post subject: | GDSD Trim Tabs |
Anyone ever cut the tabs off the bottom of the skeg? Mine runs fine through thick grass while on plane, but trying to idle or just putt around they seem to catch alot of grass. Would I have trouble keeping the prop in the water? |
|
| Author: | AKA Freshwaterkilla [ Thu Dec 05, 2013 11:59 pm ] |
| Post subject: | Re: GDSD Trim Tabs |
Yes u will don't cut them off u can cut the cavitation plate off though it's pointless Sent from the baddest mudmotor out there
|
|
| Author: | alexm [ Sun Dec 08, 2013 12:12 pm ] |
| Post subject: | Re: GDSD Trim Tabs |
I have the same problems. While put putting. I have a 23 hp though. I wanna make my own veggie cutter or something for it. |
|
| Author: | mattpittinger [ Sun Dec 08, 2013 6:22 pm ] |
| Post subject: | Re: GDSD Trim Tabs |
I have trouble keeping mine in the water with the current trim tabs past 4100rpms. If I bend the back of trim trim tabs up, will this help? |
|
| Author: | AKA Freshwaterkilla [ Sun Dec 08, 2013 6:27 pm ] |
| Post subject: | Re: GDSD Trim Tabs |
| Author: | AKA Freshwaterkilla [ Sun Dec 08, 2013 6:27 pm ] |
| Post subject: | Re: GDSD Trim Tabs |
| Author: | alexm [ Wed Dec 11, 2013 12:27 am ] |
| Post subject: | Re: GDSD Trim Tabs |
Hey Matt, u have a mikuni or any mods on that 23? How u getting 4100 rpms? I have some mods and the only way I get close to those rpms is alone on my boat. With 3 guys and a load it's doing 3600 to 3800 depending how I trim the engine. N I think I need a new prop soon. I average 20mph and get 22 max with this load. |
|
| Author: | mattpittinger [ Wed Dec 11, 2013 2:13 pm ] |
| Post subject: | Re: GDSD Trim Tabs |
Actually mine is a 35 hp with a mikuni, heads, and exhaust. Not a 23 hp, yours speed sound about right for a 23 with a worn prop. |
|
| Author: | alexm [ Mon Dec 30, 2013 7:29 pm ] |
| Post subject: | Re: GDSD Trim Tabs |
Alright bro thanks |
|
| Author: | Gigafowl [ Mon Dec 30, 2013 7:48 pm ] |
| Post subject: | Re: GDSD Trim Tabs |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|