If right now you ride in your boat looking like this
Send your shit to Jamie B. and you'll be riding around looking like this!
True story.
| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| SETX performance heads vs Iron Mtn? http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=48585 |
Page 1 of 1 |
| Author: | tlsmith22 [ Tue Dec 24, 2013 4:47 pm ] |
| Post subject: | SETX performance heads vs Iron Mtn? |
Which seem to be the most preferred? I heard in 2012 that IM really cut back on the performance of them. Is Cody still in business, dont see much on here from him anymore? It's for a 45 mag with a carb and exhaust if it matters...so I am thinkn a good set of heads will really make a difference....thanks guys |
|
| Author: | krogers [ Tue Dec 24, 2013 4:57 pm ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
You can try Cody, but if ur in a hurry he may not be ur guy. There are some guys on here that can do heads as well. |
|
| Author: | bmartina [ Tue Dec 24, 2013 5:01 pm ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
Hoyt , Calen , And Jamie B are the other I would look to before I would consider iron mountain |
|
| Author: | tlsmith22 [ Tue Dec 24, 2013 7:58 pm ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
Do these guys do my heads or I just swap out heads with them? Can't hardly be without my boat during duck season... |
|
| Author: | Bigrich [ Tue Dec 24, 2013 8:08 pm ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
If they have a set then send yours in as cores but it's hunting season for them too!! |
|
| Author: | jerimiahw [ Tue Dec 24, 2013 9:16 pm ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
Yes Jamie does nice work just got a set done fast turnaround |
|
| Author: | lunacris [ Tue Dec 24, 2013 9:20 pm ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
have a friend that sent his to Jamie B. great product. either him or cody will do mine when i go custom. |
|
| Author: | cupped up [ Tue Dec 24, 2013 9:32 pm ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
If right now you ride in your boat looking like this Send your shit to Jamie B. and you'll be riding around looking like this! True story. |
|
| Author: | Bigrich [ Tue Dec 24, 2013 10:04 pm ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
| Author: | CJB [ Tue Dec 24, 2013 10:09 pm ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
Iron mountain = junk |
|
| Author: | Bigrich [ Wed Dec 25, 2013 12:10 am ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
| Author: | schmitt [ Wed Dec 25, 2013 12:44 am ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
I have talked to a bunch and Cody by far took the time to go through my setup and custom mods I'm going to be doing, Better then most. My o2 |
|
| Author: | missile [ Wed Dec 25, 2013 6:50 am ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
| Author: | pokey79 [ Wed Dec 25, 2013 7:39 am ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
or like this
|
|
| Author: | boomerzuma [ Wed Dec 25, 2013 11:10 am ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
Jamie B is a good dude!!! Don't hesitate to have him work your heads. He did fine job for me. |
|
| Author: | tlsmith22 [ Wed Dec 25, 2013 1:13 pm ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
I see how to get in touch with Calen, but how do I contact Jamie B and Hoyt? |
|
| Author: | North LA Hunter [ Wed Dec 25, 2013 1:15 pm ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
| Author: | Will [ Thu Dec 26, 2013 5:19 am ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
Good head work... Bad head work...  |
|
| Author: | tlsmith22 [ Thu Dec 26, 2013 1:03 pm ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
Who done the good one? |
|
| Author: | Will [ Thu Dec 26, 2013 1:17 pm ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
They're in order per the thread subject |
|
| Author: | cupped up [ Thu Dec 26, 2013 9:27 pm ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
To whoever it may concern...keep in mind that its port shape and valve work that makes horsepower, not a shiny finish...shiny pretty finishes are really just a sales pitch for people who don't know no better. I'd venture to say that Cody's head in pic 1 flows a good bit better than the IM head in pic 2, but not because its prettier and shinier and smoother. Carry on. |
|
| Author: | Cutemboys [ Thu Dec 26, 2013 9:29 pm ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
My IM heads didn't look a thing like that, ive been happy with mine. Sent from my SAMSUNG-SGH-I317 using Tapatalk |
|
| Author: | JD [ Thu Dec 26, 2013 10:43 pm ] |
| Post subject: | Re: SETX performance heads vs Iron Mtn? |
a good seal is the most important thing about head work with these small motors. Factory installed valves won't hold water. Until you match the ports from intake to heads and bench them you don't know what you have done. Valves that seal make for a sweet running engines. Cams and compression is what builds HP. JD |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|