MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
Boat DR. Heads http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=58621 |
Page 1 of 2 |
Author: | mxmike26 [ Fri Dec 12, 2014 10:09 am ] |
Post subject: | Boat DR. Heads |
Installed a set of Boat Dr. heads this past weekend after my stock heads were at 85% leak down after 50 hours. Man what a difference. Motor even idles now lol. Biggest gain was my load capability. Just wanted to give the guys at Boat Dr. a big thumbs up. |
Author: | brycecheramie [ Fri Dec 12, 2014 10:11 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | mxmike26 [ Fri Dec 12, 2014 10:32 am ] |
Post subject: | Re: Boat DR. Heads |
Reworked heads All new parts, decked, heavier springs, etc. As far as the gains, was a huge difference, but when your old heads are basically letting everything by its hard not to notice a huge difference. Got about 3 MPH more when running empty, at 28 MPH with 1750 GTrax. Big difference in holeshot. But the huge difference was when the boat is loaded down. Before with four guys in the boat, decoys, dog, guns, etc, I could not get on plane. Can now. |
Author: | brycecheramie [ Fri Dec 12, 2014 10:39 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | Mudhole [ Fri Dec 12, 2014 11:31 am ] |
Post subject: | Re: Boat DR. Heads |
If you don't mind, I'd like to know how much they were?? |
Author: | mudxxed [ Fri Dec 12, 2014 12:04 pm ] |
Post subject: | Re: Boat DR. Heads |
Pm or Google boat dr and give him a call on prices. I also got my heads done thru Andy and 100% happy with em |
Author: | mxmike26 [ Fri Dec 12, 2014 2:30 pm ] |
Post subject: | Re: Boat DR. Heads |
Give them a call bud. They answered all my questions and didnt try to push me in any direction. Told me to do a leakdown before ordering heads. If it was high, need heads. |
Author: | deadbird8 [ Fri Dec 12, 2014 6:57 pm ] |
Post subject: | Re: Boat DR. Heads |
Author: | brycecheramie [ Sat Dec 13, 2014 5:23 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | jerimiahw [ Sat Dec 13, 2014 5:35 am ] |
Post subject: | Re: Boat DR. Heads |
Yes I agree valves will eventually leak and it's not iron mountains fault I had a set of setx heads leak with only 60hrs on them all it takes is one good mud run and you can over heat them and they will leak no matter who does head work |
Author: | brycecheramie [ Sat Dec 13, 2014 6:15 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | deadbird8 [ Sat Dec 13, 2014 6:34 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | brycecheramie [ Sat Dec 13, 2014 6:41 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | deadbird8 [ Sat Dec 13, 2014 6:44 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | brycecheramie [ Sat Dec 13, 2014 7:27 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | dguidry [ Sat Dec 13, 2014 7:30 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | pokey79 [ Sat Dec 13, 2014 7:33 am ] |
Post subject: | Re: Boat DR. Heads |
that is correct! andy is doing his own thing with the heads (not iron mountain) |
Author: | brycecheramie [ Sat Dec 13, 2014 7:36 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | cb5331 [ Sat Dec 13, 2014 9:04 am ] |
Post subject: | Re: Boat DR. Heads |
IM couldn't meet andy's supply demand. Midget gave him the green light. |
Author: | idabilly [ Sat Dec 13, 2014 9:04 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | dguidry [ Sat Dec 13, 2014 9:10 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | cb5331 [ Sat Dec 13, 2014 9:16 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | jerimiahw [ Sat Dec 13, 2014 12:51 pm ] |
Post subject: | Re: Boat DR. Heads |
Author: | brycecheramie [ Sat Dec 13, 2014 1:11 pm ] |
Post subject: | Re: Boat DR. Heads |
Author: | Full Throttle [ Sat Dec 13, 2014 3:14 pm ] |
Post subject: | Re: Boat DR. Heads |
Been very impressed w the heads Andy did for me. Safe, reliable power with great customer service. |
Author: | brycecheramie [ Sat Dec 13, 2014 3:17 pm ] |
Post subject: | Re: Boat DR. Heads |
I PM'd BoatDr. but no answer yet. i know its the weekend and he has a life other than mudmotors lol Doe she charge about the same as a custom set of heads done, or a little cheaper considering you are giving your heads as core? |
Author: | 270Handiman [ Sat Dec 13, 2014 3:38 pm ] |
Post subject: | Re: Boat DR. Heads |
Same as the IM heads I believe. |
Author: | Dgraham225 [ Sat Dec 13, 2014 9:09 pm ] |
Post subject: | Re: Boat DR. Heads |
I gotta get in touch with him too, local shop f'd up my oversized seat and valve job, hopefully he can fix em or sell me a set of new ones. Second split opens next weekend, gotta get this stuff fixed asap!! |
Author: | brycecheramie [ Sun Dec 14, 2014 5:22 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | txmudcutter [ Sun Dec 14, 2014 10:30 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | brycecheramie [ Sun Dec 14, 2014 10:32 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | BoatDR [ Mon Dec 15, 2014 9:30 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | BoatDR [ Mon Dec 15, 2014 9:59 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | brycecheramie [ Mon Dec 15, 2014 10:07 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | gfowel [ Mon Dec 15, 2014 10:45 am ] |
Post subject: | Re: Boat DR. Heads |
Author: | mudxxed [ Mon Dec 15, 2014 3:56 pm ] |
Post subject: | Re: Boat DR. Heads |
Author: | jerimiahw [ Mon Dec 15, 2014 5:51 pm ] |
Post subject: | Re: Boat DR. Heads |
Andy when will you have a boss h you need to pull it down and we can demo and duck hunt at the same time I am very interested in the h |
Author: | flatboat [ Mon Dec 15, 2014 6:13 pm ] |
Post subject: | Re: Boat DR. Heads |
Author: | BoatDR [ Tue Dec 16, 2014 6:23 pm ] |
Post subject: | Re: Boat DR. Heads |
Author: | Dgraham225 [ Tue Dec 16, 2014 6:25 pm ] |
Post subject: | Re: Boat DR. Heads |
Damn I hope you still have one when I come back down, I just wanna see one in person. That's my next purchase for sure if they live up to the hype! I've been waiting two seasons now to check one out |
Page 1 of 2 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |