| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Push button start switch conversion. http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=71772 |
Page 1 of 1 |
| Author: | Hanks Dad [ Wed Dec 20, 2017 11:42 pm ] |
| Post subject: | Push button start switch conversion. |
Has anyone here swapped the key out for a push button starter switch? I am not a fan of the key, would love a plug and play conversion. Thanks for the feedback. |
|
| Author: | cb5331 [ Thu Dec 21, 2017 12:51 pm ] |
| Post subject: | Re: Push button start switch conversion. |
The keyswitch does more than just activate the starter. You can do what you want to do, but you'd also need a toggle switch to turn on the ignition circuit (if necessary), and a switch to ground the kill wire when you want to shut down. You could rig this up with a relay, and accomplish this with one extra switch, but don't really understand the benefit of doing all that. |
|
| Author: | txduckkilla [ Thu Dec 21, 2017 11:11 pm ] |
| Post subject: | Re: Push button start switch conversion. |
I’ve done all that. I have momentary push button start, a momentary push button kill, and a remote trim in a control box mounted on my grab bar. I like the set up much better than everything mounted on the tiller handle. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|