MudmotorTalk.com - View topic - GoDevil SD 35 shaky tiller

Page 1 of 1

[ 8 posts ]

GoDevil SD 35 shaky tiller

Author	Message
flymartin MMT Member Joined: Mon Mar 03, 2014 10:04 am Posts: 13	GoDevil SD 35 shaky tiller Hi Guys When I ride my GD SD35 my handle is always ´shaky’, it move from left or right, down to up, around 2-3 inches at the time. It’s not a comfortable ride . When I look video of other guy with GD and MB they pretty stable and comfortable, no shaky handle. Anyone has a tips to fix that Thx Martin _________________ Using Tapatalk
Mon Jul 23, 2018 7:21 pm

Wchauvin MMT 1000 Club Joined: Sat Sep 30, 2017 7:10 pm Posts: 1872	Re: GoDevil SD 35 shaky tiller Don't know if your model is one with a rubber bushing, but if it is, you probably have to replace the bushing and then the problem will be fixed. If it has no bushing, then you may just have to tighten the receiver bolts on the base of the motor where the handle attaches to the base
Mon Jul 23, 2018 7:30 pm

Gigafowl MMT Elite Member Joined: Tue Jan 13, 2009 7:19 pm Posts: 6441 Location: Trinity Bay - Texas	Re: GoDevil SD 35 shaky tiller The wrong size retaining pin and clip will give you looseness up and down.... Seek out any looseness while on the trailer.... Also is this a tall transom motor on a tall transom boat ??? _________________ Eat - Sleep - Hunt ! ! ! "It is good to have an end to journey toward; but it is the journey that matters, in the end."
Mon Jul 23, 2018 8:41 pm

flymartin MMT Member Joined: Mon Mar 03, 2014 10:04 am Posts: 13	Re: GoDevil SD 35 shaky tiller _________________ Using Tapatalk
Tue Jul 24, 2018 8:35 am

Gigafowl MMT Elite Member Joined: Tue Jan 13, 2009 7:19 pm Posts: 6441 Location: Trinity Bay - Texas	Re: GoDevil SD 35 shaky tiller GDSD handle has multiple height adjustment handle with pin and clip that holds it at one of several height positions.... You do not have the required permissions to view the files attached to this post. _________________ Eat - Sleep - Hunt ! ! ! "It is good to have an end to journey toward; but it is the journey that matters, in the end."
Tue Jul 24, 2018 3:59 pm

flymartin MMT Member Joined: Mon Mar 03, 2014 10:04 am Posts: 13	Re: GoDevil SD 35 shaky tiller _________________ Using Tapatalk
Tue Jul 24, 2018 4:32 pm

kirk MMT F.E. Joined: Thu Apr 18, 2013 5:52 pm Posts: 870 Location: SW LA	Re: GoDevil SD 35 shaky tiller
Fri Jul 27, 2018 5:21 am

Gigafowl MMT Elite Member Joined: Tue Jan 13, 2009 7:19 pm Posts: 6441 Location: Trinity Bay - Texas	Re: GoDevil SD 35 shaky tiller My guess was the wrong size pin - or - prop blowout because of a mismatch on transom height of the hull being over 17" on a short shaft GDSD.... But we have not heard back from the OP.... _________________ Eat - Sleep - Hunt ! ! ! "It is good to have an end to journey toward; but it is the journey that matters, in the end."
Fri Jul 27, 2018 6:57 am

Display posts from previous: Sort by

Page 1 of 1

[ 8 posts ]

GoDevil SD 35 shaky tiller

Who is online