MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
Prodrive Exhaust Help http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=73092 |
Page 1 of 1 |
Author: | Bigen [ Wed Oct 10, 2018 6:17 am ] |
Post subject: | Prodrive Exhaust Help |
I have a short shaft prodrive and recently noticed a hole in the back side. I have found a voodoo that I am planning on buying. I have researched and researched,but I’m having trouble finding feedback on the voodoo’s construction. Will this be the last exhaust I need to buy? Will it be expected to crack being so near the water? Also, has anyone tried wrapping them to help? |
Author: | brycecheramie [ Wed Oct 10, 2018 6:55 am ] |
Post subject: | Re: Prodrive Exhaust Help |
This will not be your last exhaust you buy lol It will eventually rust, and possibly crack. Don't wrap it either, like I said, it will rust. All I ever do is buy a stainless stocker and gut it. Saves money. |
Author: | Wchauvin [ Thu Oct 11, 2018 2:00 am ] |
Post subject: | Re: Prodrive Exhaust Help |
Yeah they all give out in time. I had my buddy Dustin breaux in Houma do a cerecoat on my voodoo that has 50 hours on it roughly now and looks like the day I put it in the boat. No rust whatsoever and we only hunt in salt water. Might be a good option for you to help it last longer. My boat also stays in a garage when not in use, so I'm sure that helps a lot too |
Author: | Bigen [ Thu Oct 11, 2018 2:47 pm ] |
Post subject: | Re: Prodrive Exhaust Help |
Author: | brycecheramie [ Thu Oct 11, 2018 3:32 pm ] |
Post subject: | Re: Prodrive Exhaust Help |
Author: | Wchauvin [ Thu Oct 11, 2018 5:49 pm ] |
Post subject: | Re: Prodrive Exhaust Help |
The header paint doesn't hold up well but that cerecoat has |
Author: | dead animal [ Thu Oct 11, 2018 7:57 pm ] |
Post subject: | Re: Prodrive Exhaust Help |
just get a hammer and beat a bunch of holes in your stock muffler. you will then have a extremely loud piece of shit muffler and it will save u 500$. good luck |
Author: | Wchauvin [ Thu Oct 11, 2018 8:48 pm ] |
Post subject: | Re: Prodrive Exhaust Help |
Author: | Bigen [ Thu Oct 11, 2018 9:42 pm ] |
Post subject: | Re: Prodrive Exhaust Help |
I love all of the positivity. Hahaha Guess I will just wipe her down with oil until I get time to cerakote it. |
Author: | idabilly [ Fri Oct 12, 2018 7:43 am ] |
Post subject: | Re: Prodrive Exhaust Help |
For what it's worth I have a MarshMellow that has been on my PD for 9 years. Works well and it's hanging in there. |
Author: | ibfishinb [ Fri Oct 12, 2018 10:54 am ] |
Post subject: | Re: Prodrive Exhaust Help |
My Marshmellow has been on my GTR since 2011. I have replaced the mounting brackets twice and the large hose clamps occasionally. The muffler itself is fine. About 2 years ago I sandblasted it and painted it with high temp paint. It has held up. I only run in freshwater and the boat stays in my shop. Sent from my SM-G920V using Tapatalk |
Author: | Wchauvin [ Fri Oct 12, 2018 7:14 pm ] |
Post subject: | Re: Prodrive Exhaust Help |
I wash my boat every trip before I bring it home to get the salt off too which helps in keeping everything staying nice |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |