MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
MB wont stay trimmed down under throttle http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=73240 |
Page 1 of 1 |
Author: | PTcornbread [ Sun Nov 18, 2018 8:10 pm ] |
Post subject: | MB wont stay trimmed down under throttle |
I have a 2010 35 HD mud buddy with a mercury trim that will not stay trimmed down under throttle. I have tried to refresh and add trim fluid, still to the same. Is my trim done or am I missing somthing? |
Author: | brycecheramie [ Mon Nov 19, 2018 6:10 pm ] |
Post subject: | Re: MB wont stay trimmed down under throttle |
How much are you trying to trim it down while running? Your prop should not be fully submerged while running wide open |
Author: | PTcornbread [ Tue Nov 20, 2018 9:38 am ] |
Post subject: | Re: MB wont stay trimmed down under throttle |
When I trim it down to to push out of mud it will not stay down and pushes back up to horizontal with boat. I know it has movement allowed to bump up over Logs, but if I cant keep it down in the mud, I'll never get enough force to push out. I've noticed the same goes when I trim it up out of water to get over logs and give throttle it will settle back down to horizontal. Is that normal behavior and I just haven't noticed it before? |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |