|
FAQ
• Login
|
|
It is currently Wed Apr 24, 2024 2:43 pm
|
|
Page 1 of 1
|
[ 9 posts ] |
|
Author |
Message |
BMR1214
MMT Member
Joined: Sun Dec 02, 2018 12:30 pm Posts: 5
|
Pro Drive 35 hp
Looking for information and opinions on stage 2 Performance kits. Thanks
Sent from my iPhone using Tapatalk
|
Sun Dec 02, 2018 1:27 pm |
|
|
Will C
MMT Sponsor
Joined: Fri Jan 10, 2014 1:16 pm Posts: 2107 Location: Gladewater TX
|
Re: Pro Drive 35 hp
Everyone's stage 2 is different. A good stage 2 motor will be a a lot more fun to drive than stock. Load carrying ability goes way up also
|
Wed Dec 05, 2018 12:26 pm |
|
|
banded-mallard
MMT 1000 Club
Joined: Wed Oct 07, 2009 8:18 pm Posts: 4310
|
Re: Pro Drive 35 hp
PD is 36, 37 or 40. What year model do you have? CDI or NON-CDI? Will make a difference depending on your mods and what you want to do. CDI are protected by 4750 coils when adding performance parts. So your cam will dictate that. Non-cdi has no limiter and will spin to the moon and will blow up if you don't know what your doing. Each has plus and minus.
|
Thu Dec 06, 2018 9:19 am |
|
|
BMR1214
MMT Member
Joined: Sun Dec 02, 2018 12:30 pm Posts: 5
|
Re: Pro Drive 35 hp
I have a 36 hp NON-CDI. Also what do y’all think of the MAC Muffler?
Sent from my iPhone using Tapatalk
|
Thu Dec 06, 2018 9:21 am |
|
|
banded-mallard
MMT 1000 Club
Joined: Wed Oct 07, 2009 8:18 pm Posts: 4310
|
Re: Pro Drive 35 hp
Exhaust is a very small piece of the pie when considering performance. Any free flowing exhaust will do just fine unless your in the "hey look at my new shiny $700 exhaust" crew. You can take a stock exhaust, gut it, and it will flow just as good as all these high end exhaust. You would need a dyno to tell the difference. AND....... they all crack at some time. its just the nature of the SS. When I did my mod on my old engine, Heads are #1. You can put all that fancy shit on it you want, but if the engine can't breathe, it won't run. Everything else you do after heads will be complimentary.
|
Thu Dec 06, 2018 9:46 am |
|
|
banded-mallard
MMT 1000 Club
Joined: Wed Oct 07, 2009 8:18 pm Posts: 4310
|
Re: Pro Drive 35 hp
read this. I did mine in different stages and noted the changes when I modded my 07PD NON-cdi. Gives you an idea of what to expect. UNLESS..... you have a gen3 lower, then all speeds will be slower.
|
Thu Dec 06, 2018 9:52 am |
|
|
brycecheramie
MMT 1000 Club
Joined: Thu Nov 04, 2010 7:38 am Posts: 4323 Location: Cut Off, La.
|
Re: Pro Drive 35 hp
You can say that again!
_________________ Refurbishing a Prodrive
|
Sun Dec 09, 2018 1:38 pm |
|
|
Wchauvin
MMT 1000 Club
Joined: Sat Sep 30, 2017 7:10 pm Posts: 1872
|
Re: Pro Drive 35 hp
Are the gen 3 lowers slower because they are geared differently?
|
Sun Dec 09, 2018 1:46 pm |
|
|
banded-mallard
MMT 1000 Club
Joined: Wed Oct 07, 2009 8:18 pm Posts: 4310
|
Re: Pro Drive 35 hp
Yes
|
Sun Dec 09, 2018 2:20 pm |
|
|
|
|
Page 1 of 1
|
[ 9 posts ] |
|
Who is online |
Users browsing this forum: Google [Bot], Majestic-12 [Bot] and 209 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|