Push pole, paddle, tool box, and in that tool box, a pair of needle nose pliers for when you get a decoy string caught in your prop lol oooooo yeah, and cold millers, must have lots of cold millers
| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Must haves - spare parts http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=73416 |
Page 1 of 1 |
| Author: | triplebeard [ Sun Jan 06, 2019 12:08 pm ] |
| Post subject: | Must haves - spare parts |
What's in your dry box/tool kit for spare parts for a carbureted 35 Briggs/Gator-tail? Part numbers for belts, relays, switches? Tools that are a must have? Trying to get my go bag together. Figured everyone with a Briggs could benefit from this. Thanks for the input. |
|
| Author: | bluesky2012 [ Sun Jan 06, 2019 1:12 pm ] |
| Post subject: | Re: Must haves - spare parts |
I take a baggy with a few extra stock push rods and fuses, then I have a small tool kit with a few wrenches, pliers, torx wrench, and a few feet of 10 gauge wire, 550 cord, and a lithium jumper battery. |
|
| Author: | DENNYEDWARDS [ Sun Jan 06, 2019 2:02 pm ] |
| Post subject: | Re: Must haves - spare parts |
Everything mentioned plus a spare starter motor. |
|
| Author: | Russ [ Sun Jan 06, 2019 3:08 pm ] |
| Post subject: | Re: Must haves - spare parts |
A spare briggs. #CFFITR #TheGhostBoat #whoneedsphysicsihaveamudmotor |
|
| Author: | JBsuperG [ Sun Jan 06, 2019 3:25 pm ] |
| Post subject: | Re: Must haves - spare parts |
| Author: | bluesky2012 [ Sun Jan 06, 2019 3:32 pm ] |
| Post subject: | Must haves - spare parts |
| Author: | Wchauvin [ Sun Jan 06, 2019 7:35 pm ] |
| Post subject: | Re: Must haves - spare parts |
Push pole, paddle, tool box, and in that tool box, a pair of needle nose pliers for when you get a decoy string caught in your prop lol oooooo yeah, and cold millers, must have lots of cold millers
|
|
| Author: | fowl_ [ Mon Jan 07, 2019 1:05 pm ] |
| Post subject: | Re: Must haves - spare parts |
I saw a similar preparedness post where a guy was harping on having an extra kill switch lanyard. I scoffed at that but I ended up in some thick stuff last Friday and mine ended up at the bottom of the river before I knew it. Needless to say I have a couple spares now. Sent from my SM-G955U using Tapatalk |
|
| Author: | Russ [ Mon Jan 07, 2019 1:15 pm ] |
| Post subject: | Re: Must haves - spare parts |
You can use fuel line in a pinch for a kill switch lifter. #CFFITR #TheGhostBoat #whoneedsphysicsihaveamudmotor |
|
| Author: | bluesky2012 [ Mon Jan 07, 2019 1:55 pm ] |
| Post subject: | Re: Must haves - spare parts |
| Author: | fowl_ [ Mon Jan 07, 2019 3:07 pm ] |
| Post subject: | Re: Must haves - spare parts |
To be fair I have a PD so it's the mash the button type. Rigged it up with some p cord and the folded top of a shell box. Good info for those that have the lifter though for sure Sent from my SM-G955U using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|