| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Pushrod popping out http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=74672 |
Page 1 of 1 |
| Author: | Duck-killa [ Tue Oct 29, 2019 6:41 pm ] |
| Post subject: | Pushrod popping out |
Had a cam laying around, so we decided to throw it in my buddy's motor. Installed the cam and new lifters, greased and oiled everything good. Cranked it up, ran fine for a little while, now the rocker bolt on the intake vavle on #2 cylinder keeps backing out and unseating the pushrod, noticed today that I had to push the lifter now hard for it too move, tighten everything back up and reset valve and ran back to the launch with no problems. Anyone ever had a problem with a stuck lifter ? I'm maybe leaning towards a bent valve or rocker throwing that side out of wack. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|