| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Mud Buddy HDR - Problems in Reverse http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=75467 |
Page 1 of 1 |
| Author: | Hogjaw [ Fri Dec 18, 2020 12:54 pm ] |
| Post subject: | Mud Buddy HDR - Problems in Reverse |
I'm wondering if anyone else has had problems with an HDR that feels and sounds like it's slipping when in reverse even with a brand new prop. I'd compare it to having a spun prop on an outboard where it feels fine at low RPMs but when I add a little throttle, the engine revs up seemingly under no load with no apparent increase at the prop. Additionally, and I'll assume that they're related, I've noticed that some of the stainless steel pins/studs that hold the reverse magnets in place are backing out out the clutch cover with one of the pins falling out completely (See attached photo). These studs are just pressed into the clutch cover but I don't see what could be hitting them to push them out. Sorry if I'm missing something obvious but thanks in advance for any help. |
|
| Author: | boatguy [ Wed Jan 13, 2021 6:58 am ] |
| Post subject: | Re: Mud Buddy HDR - Problems in Reverse |
have you checked that your magnets are working? Check gear oil in trans.? |
|
| Author: | Hogjaw [ Wed Jan 13, 2021 9:01 am ] |
| Post subject: | Re: Mud Buddy HDR - Problems in Reverse |
| Author: | Hogjaw [ Wed Jan 13, 2021 9:12 am ] |
| Post subject: | Re: Mud Buddy HDR - Problems in Reverse |
For reference, the attached picture shows the magnets mentioned in the previous posts. Thanks! |
|
| Author: | Hogjaw [ Sat Sep 18, 2021 7:39 pm ] |
| Post subject: | Re: Mud Buddy HDR - Problems in Reverse |
Has anyone else had similar problems with the HDR reverse magnets or maybe heard of someone (other than me) who has? Thanks in advance! |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|