| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Mikuni Needle and Seat http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=8423 |
Page 1 of 1 |
| Author: | Mitschke [ Sun Mar 14, 2010 8:36 pm ] |
| Post subject: | Mikuni Needle and Seat |
Anyone know where i can find one??? I cant find a 1.5, All i can find is a 2.3 , a 3. something and a 4.2 Any insight on a 1.5?? |
|
| Author: | craig [ Sun Mar 14, 2010 8:42 pm ] |
| Post subject: | Re: Mikuni Needle and Seat |
| Author: | Mitschke [ Sun Mar 14, 2010 8:45 pm ] |
| Post subject: | Re: Mikuni Needle and Seat |
Ive picked up needles, mains and pilots from my Harley dealer, but i wasnt sure about the needle and seat. Its not one of those things you change regularly ya know??? Right now, it has a 4.2 and i need a 1.5 Im getting wayyyyyy to much fuel. |
|
| Author: | craig [ Sun Mar 14, 2010 8:48 pm ] |
| Post subject: | Re: Mikuni Needle and Seat |
Call BPS. They have them carbs. dialed in pretty good over there. They should be able to fix you up. The carb. on my engine hasn't been touched with the exception of the float. I bolted it on and it's been pretty much perfect...it came from BPS. |
|
| Author: | Mitschke [ Sun Mar 14, 2010 8:53 pm ] |
| Post subject: | Re: Mikuni Needle and Seat |
How is it set up?? What main, pilot and needle are you running? |
|
| Author: | craig [ Sun Mar 14, 2010 9:13 pm ] |
| Post subject: | Re: Mikuni Needle and Seat |
165 main....25 pilot....not sure on the needle. |
|
| Author: | TXSHOCKWAVE [ Sun Mar 14, 2010 9:17 pm ] |
| Post subject: | Re: Mikuni Needle and Seat |
they come with the smaller needle and seat and you have to switch them out takes less than 5min. where did you get your carb? |
|
| Author: | craig [ Sun Mar 14, 2010 9:18 pm ] |
| Post subject: | Re: Mikuni Needle and Seat |
| Author: | indybill [ Sun Mar 14, 2010 9:21 pm ] |
| Post subject: | Re: Mikuni Needle and Seat |
Start with your closest harley dealer. Then check EVT either drake or silk on this site. |
|
| Author: | drake1 [ Sun Mar 14, 2010 11:41 pm ] |
| Post subject: | Re: Mikuni Needle and Seat |
Smallest needle and seat is the 2.3 for the hsr. We put a 25 pilot and a 165 main as well. |
|
| Author: | Gator Guy [ Mon Mar 15, 2010 8:36 pm ] |
| Post subject: | Re: Mikuni Needle and Seat |
| Author: | Gatorpoint [ Mon Mar 15, 2010 9:02 pm ] |
| Post subject: | Re: Mikuni Needle and Seat |
I am running a 175 main, its a little rich, but plugs are cheap in the grand scheme of things. It runs good in my rig! |
|
| Author: | Mitschke [ Mon Mar 15, 2010 9:47 pm ] |
| Post subject: | Re: Mikuni Needle and Seat |
| Author: | deadbird8 [ Wed Mar 17, 2010 6:01 am ] |
| Post subject: | Re: Mikuni Needle and Seat |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|