| It is currently Mon Jul 21, 2025 11:12 am |
|
Page 1 of 1 |
[ 22 posts ] |
| Print view | Previous topic | Next topic |
Prodrive and pirouge make over......
| Author | Message |
|---|---|
|
MMT Addict  Joined: Wed Jan 14, 2009 7:05 am Posts: 716 Location: NW La. 
|
 Prodrive and pirouge make over......Warning, picture heavy! lol
Ok, waited a while before deciding to post this, but figured I'm close enough to being done with it, so here goes...... Ordered some trays and had the welded in...... Then took every out of the boat, pulled the motor and slide it off the trailer, then flipped it over and started sanding! Ground the botton with a 40 grit flap wheel for steel flex. Decided to do the roe as well as it needed some TLC after several years of abuse! During the sanding found this lil oops, it was on the bottom of the bow hook so never saw it before hand...... Took it to Andy and got her fixed up...... Taped off the areas for the steel flex...... Then mixed a full gallon and poured it on both hulls, and spread with foam rollers...... Once the steel flex had cured, shot AG primer over all the bare aluminum...... Then srayed the base coat on both hulls and the gun box...... Then start with the stenciles...... After I was finished with the outside and it had cured good, got some friends over to help me flip it back over, got it set up, I started on the inside with sanding and more primer...... Then back to the steciles, it's a beach trying to do this by yourself with a 20 mph wind blowing..... After the inside paint had cured, ran all my wires back, and hooked up all the switchs and such, the cranked it back on the trailer and hung the motor back on...... Ordered hydro turf for the floor and got that put down, again, no easy task by yourself...... Still have to get my numbers painted on as well as new stickers, weather has turned off cold again, so no painting! And I'll hydro turf the front deck at a later time, my boats been down for like two months now, and I'm ready to get it back on the water!!!! _________________ "Gofer Everette?" |
| Mon Mar 28, 2011 7:09 am |
  
|
|
|
|
MMT Pro Member  Joined: Wed Jun 16, 2010 9:36 am Posts: 141
|
Re: Prodrive and pirouge make over...... just how many sheds do you have???
|
| Mon Mar 28, 2011 7:28 am |
|
|
|
|
MMT Addict Joined: Wed Jan 14, 2009 7:05 am Posts: 716 Location: NW La.
|
Re: Prodrive and pirouge make over...... Just de shop, those others are my neighboors, and yea I need a fence!!
_________________ "Gofer Everette?" |
| Mon Mar 28, 2011 7:32 am |
|
|
|
|
MMT Pro Member  Joined: Wed Nov 18, 2009 6:13 pm Posts: 409 Location: ct
|
Re: Prodrive and pirouge make over...... _________________ Life is like rolling the Dice |
| Mon Mar 28, 2011 7:34 am |
|
|
|
|
MMT 1000 Club  Joined: Thu Mar 11, 2010 8:25 pm Posts: 1588 Location: South Louisiana
|
Re: Prodrive and pirouge make over...... fine job my friend.
|
| Mon Mar 28, 2011 8:36 am |
|
|
|
|
MMT 1000 Club  Joined: Tue Jan 13, 2009 9:46 pm Posts: 4596 Location: East TEXAN Proud
|
Re: Prodrive and pirouge make over...... Well there you go .... just like that .... a Brand New BoatHull !!!!
 Great job .... you should be proud !! Querston ~ Whys SteelFlex ?? .... yore hull didn't look that bad .... also .... how much dolla's in material you thank you gots ? _________________ Git a Gator-Tail or ride in mines wake ...... MtrFact !!!!! '05 Model .... Still Number One on the Water !!!! |
| Mon Mar 28, 2011 9:29 am |
|
|
|
|
MMT Addict
Joined: Fri Jul 30, 2010 9:30 am Posts: 627 Location: Baton Rouge, LA
|
Re: Prodrive and pirouge make over...... awesome job! what brand of paint did you use??
_________________ Sold my Uncle-J and my PD so Fuc* Y'all!!!!!. "THE EDGE: There is no honest way to explain it because, the only ones who know where it is have gone over. The others... the living, are those who've pushed their control as far as they felt they could handle and then pulled back or slowed down........BUT the edge is still out there...." |
| Mon Mar 28, 2011 9:39 am |
|
|
|
|
MMT F.E.  Joined: Thu Feb 03, 2011 11:41 am Posts: 769
|
Re: Prodrive and pirouge make over...... Nice work
_________________ 18x54 Cajun Performance with Stage 1 35 GTR W/ Mikuni |
| Mon Mar 28, 2011 12:58 pm |
|
|
|
|
MMT 1000 Club  Joined: Mon May 10, 2010 1:46 pm Posts: 1180 Location: Georgia
|
Re: Prodrive and pirouge make over...... Very nice! Looks like a new rig.
_________________ 1854 Brother pulling a 36 PD viewtopic.php?f=5&t=12825 Brooks: "Tries masterbation and thank happy thots ...... purt near pulled mines off when I quit 'em ....." |
| Mon Mar 28, 2011 3:16 pm |
|
|
|
|
MMT Addict Joined: Wed Jan 14, 2009 7:05 am Posts: 716 Location: NW La.
|
Re: Prodrive and pirouge make over...... Brooks......steel flex was like 125 a gallon with the color tint, paint from Lock Stock and Barrel was 180, stenciles 100 and a couple months of work!
_________________ "Gofer Everette?" |
| Mon Mar 28, 2011 8:09 pm |
|
|
|
|
MMT Pro Member
Joined: Tue Dec 21, 2010 4:32 pm Posts: 94 Location: Starkville, MS
|
Re: Prodrive and pirouge make over...... what pattern of hydro turf is that? u did a great job on that it looks great
_________________ Don't Tread on Me |
| Mon Mar 28, 2011 8:14 pm |
|
|
|
|
MMT Addict Joined: Wed Jan 14, 2009 7:05 am Posts: 716 Location: NW La.
|
Re: Prodrive and pirouge make over...... The nat gear from GT
_________________ "Gofer Everette?" |
| Mon Mar 28, 2011 8:17 pm |
|
|
|
|
MMT Pro Member  Joined: Mon Nov 01, 2010 7:18 pm Posts: 276 Location: East Texas
|
Re: Prodrive and pirouge make over...... looks awesome! great job!!!
_________________ 1748 prodrive 36 fpr w/ some bolt ons... |
| Mon Mar 28, 2011 8:23 pm |
|
|
|
|
MMT Sponsor  Joined: Thu Oct 01, 2009 4:49 pm Posts: 8536 Location: Bridge City, TX
|
Re: Prodrive and pirouge make over...... Damn fine job, right there. Wish my paint was as nice.
_________________ 1846 GTB & 35 GTR Team Gator-Tail Killer Kallz & ANGLE PORT dealer (409) 720-8949 |
| Mon Mar 28, 2011 8:31 pm |
|
|
|
|
MMT Pro Member  Joined: Tue Jan 25, 2011 1:22 pm Posts: 497
|
Re: Prodrive and pirouge make over...... Nice Job
_________________ SENT VIA HOOT OWL! I drive a Godevil and don't give a shit about your message!!! MeatWagon GoDevil 35 Surface Drive on a 13x60 MaxCraft AIRBOAT HULL! |
| Mon Mar 28, 2011 10:25 pm |
|
|
|
|
MMT Pro Member  Joined: Mon Oct 12, 2009 12:48 pm Posts: 414 Location: Baton Rouge, LA
|
Re: Prodrive and pirouge make over...... Nice job, looks great!
Hey Brooks just name the whole thing, think it would be too tough to name each one.  |
| Tue Mar 29, 2011 7:22 am |
|
|
|
|
MMT Member
Joined: Thu Mar 24, 2011 8:21 am Posts: 38 Location: BATON ROUGE, LA
|
Re: Prodrive and pirouge make over...... awesome project man!
_________________ 23HP GO-DEVIL LT currently pushing a 1740 skiff "The average woman would rather have beauty than brains, because the average man can see better than he can think." |
| Tue Mar 29, 2011 8:48 am |
|
|
|
|
MMT Sponsor  Joined: Mon Jan 19, 2009 4:03 pm Posts: 2216 Location: Walker, Louisiana
|
Re: Prodrive and pirouge make over...... Got that thing looking good myboy!
 _________________ Ideas not coupled with action never become bigger than the brain cells they occupied. Owner DEEP SOUTH CUSTOM BOATS (225) 252-2700 Good boats ain't cheap, Cheap boats ain't good! |
| Tue Mar 29, 2011 9:19 am |
|
|
|
|
MMT Elite Member
Joined: Wed Mar 03, 2010 7:00 pm Posts: 6060 Location: Choudrant, La
|
Re: Prodrive and pirouge make over...... You ought to change over to tall transom while its apart.
_________________ CSM Custom 18x42 Battleship with a 36 PD beating you to the hole My Rig (Old Motor) viewtopic.php?f=5&t=45193 (New Motor) viewtopic.php?f=5&t=54733 Stumps Fear Me |
| Tue Mar 29, 2011 4:12 pm |
|
|
|
|
MMT Pro Member  Joined: Sat Jan 02, 2010 11:47 pm Posts: 258 Location: Duck Hill & Starkville, MS
|
Re: Prodrive and pirouge make over...... Very Nice!!
_________________ "Drop the Hammer" Excel 1651 F4 with a Mud Buddy HD7000 Excel 1860 F4 with a Mud Buddy HD5500 |
| Tue Mar 29, 2011 10:29 pm |
|
|
|
|
MMT 1000 Club  Joined: Wed Sep 16, 2009 3:47 pm Posts: 2261 Location: West Tennessee
|
Re: Prodrive and pirouge make over...... Some folks dont know how much time and work it takes to paint one up, but I beat you know..... Nice job, looks dam good....
_________________ If the Steel aint Flying the Birds aint Dying.... Uncle J 1948 holding a LT Uncle J 1848 w/? |
| Wed Mar 30, 2011 6:47 am |
|
|
|
|
MMT Addict Joined: Wed Jan 14, 2009 7:05 am Posts: 716 Location: NW La.
|
Re: Prodrive and pirouge make over...... Earl....ya got that right, especially when ya working outside in ya yard! Now if ya had a place that ya could put the boat in, now ya could prob do one in a week!
_________________ "Gofer Everette?" |
| Wed Mar 30, 2011 8:23 am |
|
|
|
|
|
Page 1 of 1 |
[ 22 posts ] |
|
All times are UTC - 6 hours |
Who is online |
Users browsing this forum: No registered users and 148 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |