I like the handrails, always wanted some, when I get a new boat it will have them.
Oh, and my pipe says SCH 40 on it. Always just thought it was a birthmark.
| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Started today http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=12406 |
Page 1 of 1 |
| Author: | TDUET [ Wed Sep 15, 2010 2:09 pm ] |
| Post subject: | Started today |
I started building my boat blind today.. Simple set-up nothing real fancy but it will get the job done.. Ill post pic's after I get the frame finished |
|
| Author: | TDUET [ Fri Oct 01, 2010 2:47 pm ] |
| Post subject: | Re: Started today |
Got my boat back from the fab shop today... I had rails added to to sides. its 3/4"OD and flat bar as supports cut at a slight angle. Im going to use the rails to tie in the camo netting for the pop up blind. Already have them acid washed and primed... Hopefully Sunday I can finish painting. |
|
| Author: | bbb [ Fri Oct 01, 2010 3:20 pm ] |
| Post subject: | Re: Started today |
I like those rails and would love to have them on my boat. Did you get a buddy discount? If not, about how much would they set back the average Joe? |
|
| Author: | TDUET [ Fri Oct 01, 2010 3:36 pm ] |
| Post subject: | Re: Started today |
Nope paied full price, if you think 200$ is bad lol! I buddy of mine told me about this place. He had some bowfishing stuff fab'ed up for his rig. Said they had great prices. I dropped my boat off Wed and it was done today at noon! I think it came out great.. Wego aluminum & steel fab Inc. In westwego La 504-430-9375 |
|
| Author: | TDUET [ Tue Oct 05, 2010 6:38 pm ] |
| Post subject: | Re: Started today |
painted them today |
|
| Author: | TDUET [ Tue Oct 05, 2010 6:41 pm ] |
| Post subject: | Re: Started today |
paint |
|
| Author: | North LA Hunter [ Tue Oct 05, 2010 7:20 pm ] |
| Post subject: | Re: Started today |
Looks good!! Do you know what schedule that tubing is? |
|
| Author: | blaze [ Tue Oct 05, 2010 7:46 pm ] |
| Post subject: | Re: Started today |
Theres no schedule of tubing, its wall thickness. Pipe has sch. Its prob .12 wall. |
|
| Author: | North LA Hunter [ Tue Oct 05, 2010 8:33 pm ] |
| Post subject: | Re: Started today |
You got my point didnt you? |
|
| Author: | OwenDickeson [ Tue Oct 05, 2010 9:01 pm ] |
| Post subject: | Re: Started today |
| Author: | TDUET [ Wed Oct 06, 2010 3:34 am ] |
| Post subject: | Re: Started today |
Ez guys... It's 1" O.D. Pipe. I'm thinking the flat bar bracing is 1 1/2" |
|
| Author: | North LA Hunter [ Wed Oct 06, 2010 5:56 am ] |
| Post subject: | Re: Started today |
| Author: | autogateman [ Wed Oct 06, 2010 6:24 am ] |
| Post subject: | Re: Started today |
pipe measures by the inside diameter and different thicknesses affect the outside diameter, not the inside. tubing on the other hand measures from the o.d. and thicker tubes, be it square or round, make the inside hole smaller. |
|
| Author: | greenheaddrake90 [ Thu Oct 07, 2010 8:50 pm ] |
| Post subject: | Re: Started today |
so yall are telling me it dont go by like scheduel 40 |
|
| Author: | greenheaddrake90 [ Thu Oct 07, 2010 9:01 pm ] |
| Post subject: | Re: Started today |
| Author: | Woodiebuster [ Thu Oct 07, 2010 9:09 pm ] |
| Post subject: | Re: Started today |
| Author: | mississippiduckboy [ Thu Oct 07, 2010 9:13 pm ] |
| Post subject: | Re: Started today |
guys your all saying the same thing just in differnt terms just piping can be by sch 40 or sch 60 and higher also can be my od or id... but why does it matter here just piping |
|
| Author: | DeathMetalDukk [ Thu Oct 07, 2010 9:15 pm ] |
| Post subject: | Re: Started today |
I like the handrails, always wanted some, when I get a new boat it will have them. Oh, and my pipe says SCH 40 on it. Always just thought it was a birthmark.
|
|
| Author: | mississippiduckboy [ Thu Oct 07, 2010 9:18 pm ] |
| Post subject: | Re: Started today |
i also like the hand rails tie down from anywhere and i would guess you can run that motor sitting down pretty good |
|
| Author: | TDUET [ Thu Nov 04, 2010 2:16 pm ] |
| Post subject: | Re: Started today |
Finally got time to build the frame today.... Now all I need is the grass or die cut camo netting. |
|
| Author: | TDUET [ Thu Nov 04, 2010 2:18 pm ] |
| Post subject: | Re: Started today |
... |
|
| Author: | TDUET [ Thu Nov 04, 2010 2:23 pm ] |
| Post subject: | Re: Started today |
Very basic and cheap!! A pop-up duck blind does not have to cost you 500-600 bucks. This will deff get the job done after I finish camo'n it... I hope this help some guys on deciding to install a pop-up for a fraction of the price! |
|
| Author: | dozrya [ Thu Nov 04, 2010 8:45 pm ] |
| Post subject: | Re: Started today |
I finished my blind also. All my pics are on my iphone. Thanks to Cmiller for the help. |
|
| Author: | cmiller73 [ Fri Nov 05, 2010 7:54 am ] |
| Post subject: | Re: Started today |
| Author: | cmiller73 [ Fri Nov 05, 2010 8:02 am ] |
| Post subject: | Re: Started today |
Ryan, here is the pic you sent to me in text when you finished it. |
|
| Author: | TDUET [ Fri Nov 05, 2010 11:08 am ] |
| Post subject: | Re: Started today |
Looks good!! |
|
| Author: | quackconsumer [ Fri Nov 05, 2010 11:19 am ] |
| Post subject: | Re: Started today |
Nuthin gayer than a bunch of phags on da internet arguin bout how they measure der pipe. |
|
| Author: | TDUET [ Sun Nov 07, 2010 9:21 pm ] |
| Post subject: | Re: Started today |
Just got home from Cabelas with my new blind material.. I finaly broke down and bought the Avery camo net system, and let me tell u this stuff is awesome. As soon as I got home I ripped open the package to check it out and in totaly impressed!! Pics to come Monday after I install it. It shouldn't take long with the built in velcrow tabs! Wish I bought this stuff in the years past but I always thought it was way over priced!! |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|