| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Floor Foam http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=13868 |
Page 1 of 1 |
| Author: | RB1 [ Wed Nov 17, 2010 11:22 pm ] |
| Post subject: | Floor Foam |
I removed the floor foam from my 18X44 GD. A total of 170lbs. just under the floor. |
|
| Author: | dano [ Wed Dec 08, 2010 11:32 am ] |
| Post subject: | Re: Floor Foam |
What did ya replace it with?? |
|
| Author: | Team Camo [ Wed Dec 08, 2010 11:38 am ] |
| Post subject: | Re: Floor Foam |
| Author: | dano [ Wed Dec 08, 2010 11:53 am ] |
| Post subject: | Re: Floor Foam |
Does it support the decking?? |
|
| Author: | UNCLE-J [ Wed Dec 08, 2010 11:54 am ] |
| Post subject: | Re: Floor Foam |
| Author: | Brown Duck [ Wed Dec 08, 2010 1:41 pm ] |
| Post subject: | Re: Floor Foam |
| Author: | Robn1020 [ Wed Dec 08, 2010 2:06 pm ] |
| Post subject: | Re: Floor Foam |
| Author: | dano [ Wed Dec 08, 2010 2:38 pm ] |
| Post subject: | Re: Floor Foam |
How much did GD getcha fer? |
|
| Author: | Robn1020 [ Wed Dec 08, 2010 2:48 pm ] |
| Post subject: | Re: Floor Foam |
400 bucks. But I also had them do some mods to the boat and cut me a new thicker floor. Foam was around 100. |
|
| Author: | Joe-Nathan [ Fri Dec 17, 2010 10:38 am ] |
| Post subject: | Re: Floor Foam |
I removed about 175lbs of wet ass block foam from the floor on the 16x36GD this past weekend. What did you guys use to attach the floor back in place? Did you use rivets or rounded screws? And what size? |
|
| Author: | aweyerman [ Fri Dec 17, 2010 11:20 am ] |
| Post subject: | Re: Floor Foam |
My boat that I've got now has a bunch of old floatation in it. What would I replace the floatation with when I pull it out? |
|
| Author: | prodriver [ Fri Dec 17, 2010 9:06 pm ] |
| Post subject: | Re: Floor Foam |
16X44 had 135 lbs of foam in the floor and a solid 10 pounds of mud and debris I couldn't weigh, makes a world of difference. |
|
| Author: | aweyerman [ Fri Dec 17, 2010 9:07 pm ] |
| Post subject: | Re: Floor Foam |
| Author: | prodriver [ Sat Dec 18, 2010 8:26 pm ] |
| Post subject: | Re: Floor Foam |
nada, it runs like a different beast, that foam was so water logged if i would have swamped it i am not sure how much good it was doing. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|