| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Alweld/ PD36 combo? http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=1455 |
Page 1 of 1 |
| Author: | bluebill [ Thu Apr 09, 2009 1:08 am ] |
| Post subject: | Alweld/ PD36 combo? |
Anyone run a PD on a alweld flatbottom hull? I cant get a mud motor hull locally so I am considering either an 1848 or 2052 alweld. There is only about a 50 lb difference in the 2 and I tend to always have a lot of stuff in the boat, so I'm leaning towards the 2052. Any advice? Will the 2052 be to much boat for the 36 to push? |
|
| Author: | darrel from meraux [ Thu Apr 09, 2009 6:21 pm ] |
| Post subject: | Re: Alweld/ PD36 combo? |
will run 25-27 from what iv heard. my 20x44 with a 40 mbsd ran 28 moderatly loaded |
|
| Author: | tchredneck [ Thu Apr 09, 2009 10:45 pm ] |
| Post subject: | Re: Alweld/ PD36 combo? |
epic fail |
|
| Author: | bluebill [ Sat Apr 11, 2009 9:45 pm ] |
| Post subject: | Re: Alweld/ PD36 combo? |
Thanks Darrel. tchredneck, are you saying neither combo will work? |
|
| Author: | texman034 [ Wed Apr 15, 2009 9:42 pm ] |
| Post subject: | Re: Alweld/ PD36 combo? |
I had a 1650 express with 32 PD. It ran fine (probably 25mph) with 2 people and gear. If you put the 3rd person in the boat then it slowed way down. The boat would not plane out, and sucked a huge wake behind it. I don't know if the larger boat would help. I am convinced that it was the design of the boat though. I just got a 1754 prodrive and kept the same motor. Runs great with a light load, but haven't got a chance to try it loaded yet. |
|
| Author: | darrel from meraux [ Sun Apr 26, 2009 6:10 pm ] |
| Post subject: | Re: Alweld/ PD36 combo? |
no, he's just being a dick b/c not many ppl on mmt lke mb |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|