| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Pods on surface drive rig http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=15366 |
Page 1 of 1 |
| Author: | duckdown [ Sat Jan 15, 2011 5:38 pm ] |
| Post subject: | Pods on surface drive rig |
So what do you know about this ands does it help any |
|
| Author: | cb5331 [ Sat Jan 15, 2011 6:07 pm ] |
| Post subject: | Re: Pods on surface drive rig |
They will help if your boat won't float the motor. We have them on one of our rigs...If we would have been on this site prior to putting them on, we probably would have gone another route. |
|
| Author: | duckdown [ Sat Jan 15, 2011 6:36 pm ] |
| Post subject: | Re: Pods on surface drive rig |
Will they help on 1656 |
|
| Author: | take'emgator [ Sat Jan 15, 2011 6:37 pm ] |
| Post subject: | Re: Pods on surface drive rig |
Pods equal poor performance for a surface drive |
|
| Author: | Gigafowl [ Sat Jan 15, 2011 7:28 pm ] |
| Post subject: | Re: Pods on surface drive rig |
| Author: | duckdown [ Sat Jan 15, 2011 7:35 pm ] |
| Post subject: | Re: Pods on surface drive rig |
Thanks for help |
|
| Author: | WestEndAngler [ Sun Jan 16, 2011 9:12 am ] |
| Post subject: | Re: Pods on surface drive rig |
Giga is right his rig turns good we run the same only difference is I have an 1860 with the hunt deck the added flotation in mine really helps any sort of squat that you may see also load carrying ability is increased as GigaFowl stated. Heavy boat = not great but very capable in mud but handles the rough water I see 90% of the time like a champ! You should buy a boat or get it modified for the conditions you see most if not all the time. But I agree that pods are just not a great idea |
|
| Author: | Midnight Sun [ Sun Jan 16, 2011 7:38 pm ] |
| Post subject: | Re: Pods on surface drive rig |
i run pods on my 16 56 with a mini 4000 louisiana special short transom on a 18in boat transom with an 18 degree angle i get good hole shot turns pretty good on plane and idle and i get 28 with one man or 26 to 25 with 1200lb of load i feel the pods help me |
|
| Author: | take'emgator [ Mon Jan 17, 2011 5:14 am ] |
| Post subject: | Re: Pods on surface drive rig |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|