Gigafart is the new Nab
| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| square or round? http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=1717 |
Page 1 of 1 |
| Author: | darrel from meraux [ Thu Apr 23, 2009 12:44 pm ] |
| Post subject: | square or round? |
just wondering.. if a soft chene boat is slower and drafts more water than a square chene, what would be the benefit of gettin one? |
|
| Author: | T-mac [ Thu Apr 23, 2009 1:12 pm ] |
| Post subject: | Re: square or round? |
None really unless you like pullin 1/2 G turns at WOT- They handle like a sports car, but suck carryin a load IMO. Had one for a few years....served me well but I won't get another one- Runnin a double taper now...still handles great and carries a load (long boat) I've only run a couple squares...I know there's a "trick" to turnin but I've seen too many slide into trees/banks and such to want one myself- That being said however....river had him a 1944 square that handled well...guessin because it was narrow maybe?? |
|
| Author: | Gigafowl [ Thu Apr 23, 2009 2:44 pm ] |
| Post subject: | Re: square or round? |
Darrel, You got buyers regret ??? I'll swap you a square chine fer that GD if you want.... |
|
| Author: | darrel from meraux [ Thu Apr 23, 2009 2:51 pm ] |
| Post subject: | Re: square or round? |
lol, i dont have buyers regrets, my boat does really well. I simply use this site as my mm school. If i hear or want to know something i learn here. |
|
| Author: | Gigafowl [ Thu Apr 23, 2009 3:04 pm ] |
| Post subject: | Re: square or round? |
Yeah - I was lookin at yours on line when you snatched it up, if I'm remembering right a few months back... There is no tail lift in your hull - that is what helps it turn sharp at faster speeds - however that round bottom tends not to "suction" itself to the bottom the way a square tends to when stopped.... There is always a compromise in a design - that is why good builders like GD and others offer more than one bottom profile - the tapered is a good 50/50 compromise - some lift and still some slide.... Gotta figure out what works where you are with the load you carry... Even then might still need two or three boats to do it all.... |
|
| Author: | basinhunter [ Thu Apr 23, 2009 3:17 pm ] |
| Post subject: | Re: square or round? |
Gigafart is the new Nab
|
|
| Author: | Gigafowl [ Thu Apr 23, 2009 3:34 pm ] |
| Post subject: | Re: square or round? |
I'll take that as a compliment - as he usually has somethin intelligent to post up... |
|
| Author: | T-mac [ Thu Apr 23, 2009 3:39 pm ] |
| Post subject: | Re: square or round? |
tail lift??? 
|
|
| Author: | Gigafowl [ Thu Apr 23, 2009 3:52 pm ] |
| Post subject: | Re: square or round? |
Yeah - but no goat involved... |
|
| Author: | Gigafowl [ Thu Apr 23, 2009 4:02 pm ] |
| Post subject: | Re: square or round? |
Darel's GD boat is a full round chine - designed to "sink" in a turn which makes it turn so sharp - look at an older GD boat and the paint will be worn away up the sides about 3 inches for about 2 feet up from the transom from the "tail sink" that occurs when it turns sharply in shallow water.... |
|
| Author: | darrel from meraux [ Thu Apr 23, 2009 4:10 pm ] |
| Post subject: | Re: square or round? |
lol gig you hit it man, lol my boat's paint is worn more in the exact places you described. |
|
| Author: | dog walker [ Thu Apr 23, 2009 5:45 pm ] |
| Post subject: | Re: square or round? |
Hey Darrel a guy I know had Tim's build him a hull I think it was in the 17' something class with a hunt deck for a good price but he has not put a motor on it yet.Give them a call and terrorize them about a boat hull to see what they say.By the way he got it for a good price.I have not had a chance to check it out but its down here in Meraux ya know. |
|
| Author: | darrel from meraux [ Thu Apr 23, 2009 6:00 pm ] |
| Post subject: | Re: square or round? |
Iv been hearing alot latley about these tims hulls. Heard alot of ppl say "it's not a mud hull" i know nothing about it. But i would like to see wht all the fuss is about. On another note, dog, u like bowfishing? we been smokin reds if ya wanna make a trip. |
|
| Author: | dog walker [ Thu Apr 23, 2009 6:20 pm ] |
| Post subject: | Re: square or round? |
They said he will not make a slick hull but hell we ran a rockwell 16x48 for about 10 years through mud and did not any trouble.Matter of fact that hull is fixin to be gettin another GTR on it.About bow fishin I've never been but I've got some friends that do and we were lookin at makin a few rigs this summer but the IRS done forked that up.If you need someone to steer for you let me know I can drink and steer thats easy. |
|
| Author: | darrel from meraux [ Thu Apr 23, 2009 7:26 pm ] |
| Post subject: | Re: square or round? |
yea man, ill try to set something up within the next few weeks, i got plentyenough room for us all 2 shoot |
|
| Author: | Crews [ Fri Apr 24, 2009 7:08 am ] |
| Post subject: | Re: square or round? |
| Author: | Gigafowl [ Fri Apr 24, 2009 7:24 am ] |
| Post subject: | Re: square or round? |
Envy -- the most sincere form of flattery |
|
| Author: | T-mac [ Fri Apr 24, 2009 7:42 am ] |
| Post subject: | Re: square or round? |
And ignorance is bliss 
|
|
| Author: | Crews [ Fri Apr 24, 2009 10:58 am ] |
| Post subject: | Re: square or round? |
if you think I envy you, you're dumber than you look.  it's one thing to be young and not know much, but for someone to get to your age and still not know anything must multiply the dumbass-ness by atleast 400x.
|
|
| Author: | Gigafowl [ Fri Apr 24, 2009 11:55 am ] |
| Post subject: | Re: square or round? |
If jumpin' into threads just to toss insults makes ya smart - there are some real genius types on this board.... |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|