| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Boat with a hole http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=2424 |
Page 1 of 1 |
| Author: | DuckHunter [ Sat Jun 06, 2009 5:05 pm ] |
| Post subject: | Boat with a hole |
hey guys would it be worth my while to get a boat with about an inch hole in the bottom of it and try and patch it. The new boat is a foot longer and 6 inches wider...so it would I would have more room for gear. and able to handle what I carry better It also has a bunch of little pin holes from some chemical sitting in the bottom that would need jb welded It would also still be pushed by 13hp for atleast one season if not two thanks |
|
| Author: | tmorelli [ Sat Jun 06, 2009 5:20 pm ] |
| Post subject: | Re: Boat with a hole |
Sounds like a lot of work and a PITA to me. |
|
| Author: | DeathMetalDukk [ Mon Jul 13, 2009 9:18 pm ] |
| Post subject: | Re: Boat with a hole |
Patching a 1" hole ain't nothin', find a good welder and problem solved. Those pin holes you describe worry me though, if something (probably battery acid) ate a bunch of pin holes, the metal is probably pretty thin around the holes and weak as shit. |
|
| Author: | River [ Tue Jul 14, 2009 7:23 am ] |
| Post subject: | Re: Boat with a hole |
I say go for it. For the rest of you: SHUT UP Stumpgrinder has already told you that you are messing with the process of natural selection. Can't argue with science. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|