Nice...looks like you're starting to make this a habit man
| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| 1754 http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=32109 |
Page 1 of 2 |
| Author: | dfou [ Wed Sep 05, 2012 11:31 pm ] |
| Post subject: | 1754 |
Started a new boat tonight. 1754 hunt deck with 24" sides |
|
| Author: | CJB [ Thu Sep 06, 2012 7:05 am ] |
| Post subject: | Re: 1754 |
Nice...looks like you're starting to make this a habit man
|
|
| Author: | dfou [ Thu Sep 06, 2012 10:03 am ] |
| Post subject: | Re: 1754 |
Yeah I gotta do something to support my tool addiction! Just had to buy a new miller so I need to build a few more |
|
| Author: | dfou [ Fri Sep 07, 2012 9:24 pm ] |
| Post subject: | Re: 1754 |
| Author: | BayouBugs [ Mon Sep 10, 2012 7:34 am ] |
| Post subject: | Re: 1754 |
Looks good dfou, keep your progress posted. |
|
| Author: | dfou [ Mon Sep 10, 2012 9:02 am ] |
| Post subject: | Re: 1754 |
| Author: | dfou [ Mon Sep 10, 2012 9:04 am ] |
| Post subject: | Re: 1754 |
Haven't got to work on it as much as I would like but it's comin along |
|
| Author: | OwenDickeson [ Mon Sep 10, 2012 9:53 am ] |
| Post subject: | Re: 1754 |
Do you use the same material for the cross brace as you use for the longitudinal stringers? |
|
| Author: | dfou [ Mon Sep 10, 2012 10:01 am ] |
| Post subject: | Re: 1754 |
No they don't hold up well when used as cross braces |
|
| Author: | dfou [ Mon Sep 10, 2012 9:50 pm ] |
| Post subject: | Re: 1754 |
Just about finished with the huntdeck |
|
| Author: | CootSlayerRMFT [ Mon Sep 10, 2012 10:49 pm ] |
| Post subject: | Re: 1754 |
That thing is fine. I can't wait to see what it looks like with it's done! |
|
| Author: | dfou [ Wed Sep 12, 2012 9:57 pm ] |
| Post subject: | Re: 1754 |
| Author: | brianb [ Thu Sep 13, 2012 4:25 am ] |
| Post subject: | Re: 1754 |
looks good, what company bends and crimps the sides for you and where do you get the side rail materials |
|
| Author: | dabuckmaster24 [ Thu Sep 13, 2012 5:50 am ] |
| Post subject: | Re: 1754 |
Uncle j can make you a kit with everything, and you weld it together. Call him and tell him specs and he'll get you fixed up. You could probably just buy certain pieces also. Sent from my C771 using Tapatalk |
|
| Author: | dfou [ Mon Sep 17, 2012 5:31 pm ] |
| Post subject: | Re: 1754 |
Catwalks |
|
| Author: | Marshmaster45 [ Mon Sep 17, 2012 5:46 pm ] |
| Post subject: | Re: 1754 |
lookin good |
|
| Author: | dfou [ Mon Sep 17, 2012 11:25 pm ] |
| Post subject: | Re: 1754 |
One section of floor left to weld. Getting close to being finished! |
|
| Author: | Buzz Killington [ Tue Sep 18, 2012 9:04 am ] |
| Post subject: | Re: 1754 |
man that thing looks great. still like it! |
|
| Author: | dfou [ Tue Sep 18, 2012 11:12 pm ] |
| Post subject: | Re: 1754 |
Finished welding the floor Almost finished with the removable 2' deck extension |
|
| Author: | dfou [ Thu Sep 20, 2012 9:04 pm ] |
| Post subject: | Re: 1754 |
| Author: | dfou [ Fri Sep 21, 2012 10:28 pm ] |
| Post subject: | Re: 1754 |
| Author: | Simbo [ Sat Sep 22, 2012 6:58 pm ] |
| Post subject: | Re: 1754 |
Finally got to see this sexy beast today for the first time in person!!! The 6 1/2 hrs drive from texarkana tx is well worth it!! The pics does not give this thing justice! He did a damn good job!!! He has a happy costumer headed back to Texas! I'm ready to put this thing in the water and get some duck and fish blood in it!! |
|
| Author: | CootSlayerRMFT [ Sat Sep 22, 2012 8:40 pm ] |
| Post subject: | Re: 1754 |
Congrats Bud! Let's see some pics of the paint job when you get it done, but if you're like me, I'd probably be too excited to put it in the water rather than the paint yard! Congrats again, those "dfou Luziana Battletanks" look like fine rigs. I'd like to see it tear up the marsh! dfou, you're welcome for the company name... |
|
| Author: | dfou [ Sat Sep 22, 2012 9:25 pm ] |
| Post subject: | Re: 1754 |
Jacob I'm glad you're happy with your boat. I enjoyed building it and hope it does everything you want it to. Bailey, I kinda like the name! I may have to use that. I'm proud u spelled luziana right  On a side note, coot I got some of those speakers you have in your boat and I'm pretty sure I made my slightly darker neighbors jealous of the "old school" master p I was bumping the other day
|
|
| Author: | CootSlayerRMFT [ Sun Sep 23, 2012 11:14 am ] |
| Post subject: | Re: 1754 |
| Watch out; those speakers might come up "missing"... Now that you say it, I'm thinking I'm gonna bump some Ghetto D to the blind this afternoon.
|
|
| Author: | dfou [ Sun Sep 23, 2012 11:50 am ] |
| Post subject: | Re: 1754 |
| Author: | dfou [ Sun Sep 23, 2012 7:57 pm ] |
| Post subject: | Re: 1754 |
| Author: | OwenDickeson [ Mon Sep 24, 2012 9:14 am ] |
| Post subject: | Re: 1754 |
Think you will have problems with water collecting in between the cross braces? |
|
| Author: | dfou [ Mon Sep 24, 2012 10:00 am ] |
| Post subject: | Re: 1754 |
No it's got drains in the corners |
|
| Author: | OwenDickeson [ Mon Sep 24, 2012 10:33 am ] |
| Post subject: | Re: 1754 |
Cool |
|
| Author: | dfou [ Wed Oct 10, 2012 8:10 pm ] |
| Post subject: | Re: 1754 |
Nat gear |
|
| Author: | CootSlayerRMFT [ Wed Oct 10, 2012 9:42 pm ] |
| Post subject: | Re: 1754 |
Damnit, that thing turned out fine! You gonna do the inside??? |
|
| Author: | brasso [ Wed Oct 10, 2012 9:51 pm ] |
| Post subject: | Re: 1754 |
You did a GREAT job on that boat. I really like the paint. Now all you have to do is put a real motor on it 
|
|
| Author: | CootSlayerRMFT [ Wed Oct 10, 2012 9:54 pm ] |
| Post subject: | Re: 1754 |
A long tail? |
|
| Author: | brasso [ Wed Oct 10, 2012 10:09 pm ] |
| Post subject: | Re: 1754 |
Now your thinking! |
|
| Author: | dfou [ Thu Oct 11, 2012 6:37 am ] |
| Post subject: | Re: 1754 |
That's actually what he was gonna put on it but he came to his senses and got a SD! Seriously though that boat is heavy a long tail would struggle |
|
| Author: | brasso [ Thu Oct 11, 2012 5:37 pm ] |
| Post subject: | Re: 1754 |
|
|
| Author: | Simbo [ Tue Jan 15, 2013 10:33 pm ] |
| Post subject: | Re: 1754 |
I've been using my boat all duck season with a bad prop an have been runnin 22 consistant with 3 ppl and gear.....I put a new big blade on there and now this boat will get across the water (or mud lol) quick!!! Ita runnin 26- 27 consistanly now!!! I'm very happy with this rig I am runnin a stock mud buddy on it.....no tellin with it will do with mods......it's prolly the smoothest ridin boat I've ever been in....the boat was done right and is exactly what I wanted and it does everything I want it to do plus some!!!! My paint job made that think pop it turned out pretty good I think I put hydro turf on the seat/dry box and on the front deck....I went with gray it matched pretty good.....I couldn't figure out how to post pics so Dfou will be postin them for me shorty |
|
| Author: | dfou [ Tue Jan 15, 2013 10:40 pm ] |
| Post subject: | Re: 1754 |
| Author: | mizzippi jb [ Wed Jan 16, 2013 5:02 am ] |
| Post subject: | Re: 1754 |
Good looking rig Daniel! |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|