| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| 1746 boats http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=35647 |
Page 1 of 2 |
| Author: | duckzbuckz365 [ Sun Dec 23, 2012 12:05 pm ] |
| Post subject: | 1746 boats |
I am looking at selling my boat and upgrading to a 1746 or 1748... just something narrower and faster. i am wanting to hit mid 30s haha i wanna go fast... i know i am going to gator tail next and dont know what kind of boat to get... could you guys give me some ideas on what kind of boat to get |
|
| Author: | eljefe [ Sun Dec 23, 2012 12:08 pm ] |
| Post subject: | Re: 1746 boats |
what motor? what mods? are you putting on the new boat? |
|
| Author: | T-Bubba [ Sun Dec 23, 2012 12:11 pm ] |
| Post subject: | Re: 1746 boats |
get at least a 18ft |
|
| Author: | OwenDickeson [ Sun Dec 23, 2012 12:14 pm ] |
| Post subject: | Re: 1746 boats |
Mid 30's...... 1846 gatortail boat, stage 2 mods. |
|
| Author: | eljefe [ Sun Dec 23, 2012 12:15 pm ] |
| Post subject: | Re: 1746 boats |
35hp...i would definately go 18, just to balance out engine a little more and decrease the amount of squat on take off....... |
|
| Author: | scatters boy 316 [ Sun Dec 23, 2012 12:24 pm ] |
| Post subject: | Re: 1746 boats |
1846 with huntdeck |
|
| Author: | eljefe [ Sun Dec 23, 2012 12:28 pm ] |
| Post subject: | Re: 1746 boats |
the hunt deck will also help balance the boat better because it pushes the driver up more off the transom. |
|
| Author: | duckzbuckz365 [ Sun Dec 23, 2012 4:30 pm ] |
| Post subject: | Re: 1746 boats |
I want to keep it 17 cuz I have a blind for it.... I don't want a 19 foot boat |
|
| Author: | take'emgator [ Sun Dec 23, 2012 6:11 pm ] |
| Post subject: | Re: 1746 boats |
If your going to go 17ft, personally i would do a 17x48 |
|
| Author: | OwenDickeson [ Sun Dec 23, 2012 8:04 pm ] |
| Post subject: | Re: 1746 boats |
| Author: | duckzbuckz365 [ Sun Dec 23, 2012 8:35 pm ] |
| Post subject: | Re: 1746 boats |
take em, that would be fine... what kind of boat do you got. |
|
| Author: | duckzbuckz365 [ Sun Dec 23, 2012 8:37 pm ] |
| Post subject: | Re: 1746 boats |
could you put a counsel on a 48 inch wide boat? |
|
| Author: | OwenDickeson [ Sun Dec 23, 2012 9:50 pm ] |
| Post subject: | Re: 1746 boats |
Yes you can put in a console. |
|
| Author: | duckzbuckz365 [ Sun Dec 23, 2012 9:56 pm ] |
| Post subject: | Re: 1746 boats |
does going to a custom boat pay off? |
|
| Author: | take'emgator [ Sun Dec 23, 2012 10:23 pm ] |
| Post subject: | Re: 1746 boats |
| Author: | scatters boy 316 [ Sun Dec 23, 2012 11:52 pm ] |
| Post subject: | Re: 1746 boats |
| Author: | willett [ Mon Dec 24, 2012 7:37 am ] |
| Post subject: | Re: 1746 boats |
18 is better for load carrying but 17 is faster light. Have a 1746 GT boat right now (rear hunt deck and front storage hatch) and about 2 hours ago had 3 people (all around 180-200 lbs) 3 layout blinds, full tank in front, battery in rear, rear seat box, 2 dz deeks, other essentials and was running 25 mph in deep water with a brand new engine. Never been run before today. |
|
| Author: | ak [ Mon Dec 24, 2012 8:42 am ] |
| Post subject: | Re: 1746 boats |
Can you get a hunt deck welded on later if you decide you want one |
|
| Author: | jakecologne [ Mon Dec 24, 2012 8:58 am ] |
| Post subject: | Re: 1746 boats |
| Author: | take'emgator [ Mon Dec 24, 2012 10:55 am ] |
| Post subject: | Re: 1746 boats |
| Author: | duckzbuckz365 [ Mon Dec 24, 2012 8:48 pm ] |
| Post subject: | Re: 1746 boats |
ok i think i want a 1846 with hunt deck and i want some sort of tapered or round chine but now wat kind.... custom or not? |
|
| Author: | duckzbuckz365 [ Tue Jan 01, 2013 9:25 pm ] |
| Post subject: | Re: 1746 boats |
Hopefully you guys see this again but i am down sizing in my boat because my son has turned 16 and all he does is hunt.. he quit all sports he runs a trap line in the morning before school and one after. he hunts on weekends. he uses my boat and i am worried he will get stuck by himself or with his friend.... i need a boat that will be light enough but still have power and carry at most 2 guys him and a dog, i am not a boat expert but need help deciding thanks |
|
| Author: | craig [ Tue Jan 01, 2013 9:31 pm ] |
| Post subject: | Re: 1746 boats |
| Author: | duckzbuckz365 [ Tue Jan 01, 2013 9:38 pm ] |
| Post subject: | Re: 1746 boats |
| Author: | craig [ Tue Jan 01, 2013 9:51 pm ] |
| Post subject: | Re: 1746 boats |
GatorTail |
|
| Author: | take'emgator [ Tue Jan 01, 2013 11:18 pm ] |
| Post subject: | Re: 1746 boats |
Hands down! |
|
| Author: | dadazzsaleen [ Wed Jan 02, 2013 7:57 am ] |
| Post subject: | Re: 1746 boats |
He wants to know who can make a 1746/1846 in tapered or round chine. |
|
| Author: | SwampSlut [ Wed Jan 02, 2013 9:17 am ] |
| Post subject: | Re: 1746 boats |
| Author: | craig [ Wed Jan 02, 2013 9:28 am ] |
| Post subject: | Re: 1746 boats |
The 1846 GT hull will outperform any other. Until recently, I had an 1648 GDSD (tapered) hull. It cannot be compared to the GT hull. |
|
| Author: | willett [ Wed Jan 02, 2013 9:54 am ] |
| Post subject: | Re: 1746 boats |
for the 46 wide to perform well with a Surface drive you don't want to go round chine. If you don't go square chine (best peformer) then I might go double tapered chine or single chine. The boat is not very wide so it doesn't take much for it to turn even being square chine. |
|
| Author: | SwampSlut [ Wed Jan 02, 2013 10:35 am ] |
| Post subject: | Re: 1746 boats |
| Author: | duckzbuckz365 [ Wed Jan 02, 2013 12:57 pm ] |
| Post subject: | Re: 1746 boats |
Does gatortail have a tapered chine? Or whst is it |
|
| Author: | eljefe [ Wed Jan 02, 2013 1:44 pm ] |
| Post subject: | Re: 1746 boats |
| Author: | txmudcutter [ Wed Jan 02, 2013 1:54 pm ] |
| Post subject: | Re: 1746 boats |
| Author: | Team Camo [ Wed Jan 02, 2013 3:12 pm ] |
| Post subject: | Re: 1746 boats |
| Author: | duckzbuckz365 [ Wed Jan 02, 2013 5:10 pm ] |
| Post subject: | Re: 1746 boats |
| Author: | craig [ Wed Jan 02, 2013 5:30 pm ] |
| Post subject: | Re: 1746 boats |
| Author: | duckzbuckz365 [ Wed Jan 02, 2013 8:29 pm ] |
| Post subject: | Re: 1746 boats |
yeah i guess... how would a 25 do on that boaat |
|
| Author: | Team Camo [ Wed Jan 02, 2013 8:41 pm ] |
| Post subject: | Re: 1746 boats |
1646 or 1554 Extreme are the top performers for the 25. If you plan to carry a big load with it, 1840 for weight displacement. |
|
| Author: | duckzbuckz365 [ Thu Jan 03, 2013 1:46 pm ] |
| Post subject: | Re: 1746 boats |
ok i gotta sell mine first but thanks for the help |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|