MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
Mad man custom boats http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=35932 |
Page 1 of 2 |
Author: | lmalcombe [ Wed Jan 02, 2013 5:58 pm ] |
Post subject: | Mad man custom boats |
I am looking for input about mad man custom boats. |
Author: | Docott [ Wed Jan 02, 2013 6:17 pm ] |
Post subject: | Re: Mad man custom boats |
. |
Author: | wacknstack [ Wed Jan 02, 2013 6:32 pm ] |
Post subject: | Re: Mad man custom boats |
I called when I was looking....great prices. Seemed to be a nice guy. That being said. He was using .090 aluminum. |
Author: | lmalcombe [ Wed Jan 02, 2013 6:37 pm ] |
Post subject: | Re: Mad man custom boats |
He building mine using 3/16 bottom and 1/8 on everything else |
Author: | duckslayer182 [ Wed Jan 02, 2013 6:38 pm ] |
Post subject: | Re: Mad man custom boats |
U talking about the guy in Franklin? |
Author: | lmalcombe [ Wed Jan 02, 2013 6:58 pm ] |
Post subject: | Re: Mad man custom boats |
Yes in Franklin, the cost is 4100 |
Author: | duckslayer182 [ Wed Jan 02, 2013 7:17 pm ] |
Post subject: | Re: Mad man custom boats |
He just built my boat for me 1946 mad man custom dragging a 27 prodrive |
Author: | lmalcombe [ Wed Jan 02, 2013 7:39 pm ] |
Post subject: | Re: Mad man custom boats |
Does anyone know how the 19.6 x 48 performs? |
Author: | dfou [ Wed Jan 02, 2013 7:42 pm ] |
Post subject: | Re: Mad man custom boats |
Author: | duckslayer182 [ Wed Jan 02, 2013 7:44 pm ] |
Post subject: | Re: Mad man custom boats |
What you calling a review? |
Author: | wacknstack [ Wed Jan 02, 2013 7:46 pm ] |
Post subject: | Re: Mad man custom boats |
I'm guessing he meant how did it perform? |
Author: | dfou [ Wed Jan 02, 2013 7:47 pm ] |
Post subject: | Re: Mad man custom boats |
Yeah how's it run, ride, craftsmanship etc |
Author: | duckslayer182 [ Wed Jan 02, 2013 7:51 pm ] |
Post subject: | Re: Mad man custom boats |
It rides real smooth i had my boat for 3 months already put 130 hrs on it. You will be satisfied when you get your boat finsihed |
Author: | lmalcombe [ Wed Jan 02, 2013 8:11 pm ] |
Post subject: | Re: Mad man custom boats |
How does the 27 push it |
Author: | duckslayer182 [ Wed Jan 02, 2013 8:14 pm ] |
Post subject: | Re: Mad man custom boats |
It pushes it real good i get 27mph with two ppl at 3600 rpms i normally run 3900 to 4100 rpms depends on the water im running in.What do you plan on putting on your boat? |
Author: | dfou [ Wed Jan 02, 2013 8:22 pm ] |
Post subject: | Re: Mad man custom boats |
Author: | Barroll [ Wed Jan 02, 2013 8:24 pm ] |
Post subject: | Re: Mad man custom boats |
Author: | lmalcombe [ Wed Jan 02, 2013 8:26 pm ] |
Post subject: | Re: Mad man custom boats |
Not sure yet but need to make a decision quick but leaning to 36 prodrive, he says it will hit 31 + with stock motor |
Author: | OwenDickeson [ Wed Jan 02, 2013 8:27 pm ] |
Post subject: | Re: Mad man custom boats |
Well......He's full of shit. |
Author: | dfou [ Wed Jan 02, 2013 8:30 pm ] |
Post subject: | Re: Mad man custom boats |
What's he using .090? .080? And how many braces? 2? Maybe 3? I guess it may do it until you hit that first stump! |
Author: | lmalcombe [ Wed Jan 02, 2013 8:31 pm ] |
Post subject: | Re: Mad man custom boats |
I don't know much about these boats but that's what the man said |
Author: | lmalcombe [ Wed Jan 02, 2013 8:35 pm ] |
Post subject: | Re: Mad man custom boats |
3/16 bottom and everything else 1/8, I should have taken a pic of the boat he is close to finishing up but looks like more than three braces but didn't count |
Author: | dfou [ Wed Jan 02, 2013 8:48 pm ] |
Post subject: | Re: Mad man custom boats |
Author: | OwenDickeson [ Wed Jan 02, 2013 8:56 pm ] |
Post subject: | Re: Mad man custom boats |
Not sure what size you are wanting, but I would expect something more along the lines of 26-28 mph. |
Author: | Docott [ Wed Jan 02, 2013 9:05 pm ] |
Post subject: | Re: Mad man custom boats |
My boat, built by Cory (thirdtimesacharm), 3/16 bottom, the rest 1/8, 8" catwalks, extended deck, open floor, ended up be 19' 10". It'll do 26-27 one person empty with a stock 36 PD. |
Author: | dfou [ Wed Jan 02, 2013 9:11 pm ] |
Post subject: | Re: Mad man custom boats |
Author: | wacknstack [ Wed Jan 02, 2013 9:13 pm ] |
Post subject: | Re: Mad man custom boats |
http://www.louisianasportsman.com/lpca/ ... &id=402799 This is what he was selling a few months ago when I was looking for a boat |
Author: | UNCLE-J [ Wed Jan 02, 2013 9:16 pm ] |
Post subject: | Re: Mad man custom boats |
31mph?? LMAO When people ask me. "How fast it will run?" My reply is. More than 20mph. Less than 40mph. If you want guaranteed speeds , I'll build you a padded bay boat. We got a 27' running 84mph. 1/4" bottom. 3/16" sides Get that 31 mph is writing. |
Author: | UNCLE-J [ Wed Jan 02, 2013 9:18 pm ] |
Post subject: | Re: Mad man custom boats |
19'x45'x19' is BIG!!!! I'll take 1000 of them for that price. But, I only want 19'x45'x4'. 19' deep is extremely too deep. Unless you build ya camp in it. Maybe have a access door about 4' from bottom. |
Author: | krogers [ Wed Jan 02, 2013 9:19 pm ] |
Post subject: | Re: Mad man custom boats |
Author: | wacknstack [ Wed Jan 02, 2013 9:20 pm ] |
Post subject: | Re: Mad man custom boats |
http://www.louisianasportsman.com/lpca/ ... &id=361983 |
Author: | dfou [ Wed Jan 02, 2013 9:20 pm ] |
Post subject: | Re: Mad man custom boats |
Author: | naj [ Wed Jan 02, 2013 9:21 pm ] |
Post subject: | Re: Mad man custom boats |
Author: | UNCLE-J [ Wed Jan 02, 2013 9:24 pm ] |
Post subject: | Re: Mad man custom boats |
It's a V-bottom that has a racing pad that forms to transom. It allows the boat (with enough HP) to ride on pad. Pad is approx. 18" wide. When running correctly, about 2" of pad and cavitation plate is the only alum touching water. Allison Race boats have the same design. |
Author: | naj [ Wed Jan 02, 2013 9:29 pm ] |
Post subject: | Re: Mad man custom boats |
Sounds fun. Now someone has to mod out a MM to run on a padded boat. |
Author: | UNCLE-J [ Wed Jan 02, 2013 9:34 pm ] |
Post subject: | Re: Mad man custom boats |
They got some out there that have the power!! |
Author: | Docott [ Wed Jan 02, 2013 10:18 pm ] |
Post subject: | Re: Mad man custom boats |
Evidently I should've gotten the smaller motor |
Author: | banded-mallard [ Thu Jan 03, 2013 6:14 am ] |
Post subject: | Re: Mad man custom boats |
Author: | Quinon11 [ Thu Jan 03, 2013 6:50 am ] |
Post subject: | Re: Mad man custom boats |
He builds decent boats from the looks of them don't own nor never road in one and his price or te cheapest around ... But you get what you pay for ... He gave me a price of $2850 for a 17x44 3 1/6 bottom 1/8 sides with deck only thing by the hour was extras ... Gas tank, drybox,gun box,ECT. |
Author: | UNCLE-J [ Thu Jan 03, 2013 7:20 am ] |
Post subject: | Re: Mad man custom boats |
Does he have manufacturers insurance? Will he be there tomorrow if something breaks? |
Page 1 of 2 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |