MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
What Size Fittings http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=3879 |
Page 1 of 1 |
Author: | SPRIG [ Wed Aug 12, 2009 11:48 am ] |
Post subject: | What Size Fittings |
Just got in some 3/4 inch bimini fittings to start a boat blind. The only problem is that 3/4 bimini fittings do not fit 3/4 inch emt. Way too small. What size fittings and where do you find them for 3/4 inch emt. Thanks in advance for any help |
Author: | basinhunter [ Wed Aug 12, 2009 12:00 pm ] |
Post subject: | Re: What Size Fittings |
Get a big ass drill bit and whooble them out. LA Outlaw had to do the same thing. |
Author: | hotdognjo [ Wed Aug 12, 2009 2:38 pm ] |
Post subject: | Re: What Size Fittings |
I did the same thing last year. I found a B&D burr bit. Worked well. |
Author: | Mudhole [ Thu Aug 13, 2009 9:11 am ] |
Post subject: | Re: What Size Fittings |
Yep de 3/4 is de wrong size, ya need de 7/8 ones, and ya still havya ream em out some! |
Author: | LA OUTLAW [ Thu Aug 13, 2009 1:16 pm ] |
Post subject: | Re: What Size Fittings |
Yeah that's exactly right bring back the 3/4 one and get 7/8 fittings and they you will have to use a bur bit to ream them out a tad....make sure you get the aluminum fitting not stainless you will be 80 years old before you get them all reamed out... |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |