MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
what aluminum grade to use? http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=4322 |
Page 1 of 1 |
Author: | keys1222 [ Wed Sep 02, 2009 8:25 am ] |
Post subject: | what aluminum grade to use? |
im putting a 2' piece of sheeting across the front of my boat for my dog and to be able to mount lights. thinking 1/8" thick. of the following which is better 3003, 5052, or 6061 T6. or if i find a piece of scrap the right size does it really matter the grade? patrick |
Author: | quackconsumer [ Wed Sep 02, 2009 10:50 am ] |
Post subject: | Re: what aluminum grade to use? |
5052 |
Author: | Mitschke [ Wed Sep 02, 2009 12:02 pm ] |
Post subject: | Re: what aluminum grade to use? |
5086 |
Author: | coondik [ Wed Sep 02, 2009 12:03 pm ] |
Post subject: | Re: what aluminum grade to use? |
USDA Grade A |
Author: | keys1222 [ Wed Sep 02, 2009 12:11 pm ] |
Post subject: | Re: what aluminum grade to use? |
Coon is that right beside the grade AA eggs??? any other suggestions not a clear winner yet. thanks for the input |
Author: | schrieverboy [ Wed Sep 02, 2009 12:32 pm ] |
Post subject: | Re: what aluminum grade to use? |
it really wont make a flyn f$ck when u go to use it... put all da different grades in a hat and pull a got damned number |
Author: | keys1222 [ Wed Sep 02, 2009 12:41 pm ] |
Post subject: | Re: what aluminum grade to use? |
schrieverboy thanks for the honesty, i wasnt sure so i thought someone in the know would set me straight |
Author: | schrieverboy [ Wed Sep 02, 2009 12:58 pm ] |
Post subject: | Re: what aluminum grade to use? |
im a few beers into a buzz so sorry about the honesty if u can get t-6 cheap go wit it but it really doesnt matter for what u will do wit it |
Author: | TXSHOCKWAVE [ Wed Sep 02, 2009 5:19 pm ] |
Post subject: | Re: what aluminum grade to use? |
6061 t6 is the strongest. That is what i would use. |
Author: | DeathMetalDukk [ Wed Sep 02, 2009 8:23 pm ] |
Post subject: | Re: what aluminum grade to use? |
I know this from shopping for aluminum for my floor, the strongest is somewhat brittle and a good hit could crack it instead of bend it, vice versa with the weakest, could be too flimsy. I would ask Aucoin or Brother Breaux, they use the stuff everyday. |
Author: | jrp267 [ Wed Sep 02, 2009 8:34 pm ] |
Post subject: | Re: what aluminum grade to use? |
Use the same material as your hull is made out of. Check the manufacturer website to find out. |
Author: | keys1222 [ Wed Sep 02, 2009 11:10 pm ] |
Post subject: | Re: what aluminum grade to use? |
jrp267 could you find me Appleby Manufacturing Company website? looks like i might some 6061 T6 thanks everyone |
Author: | willett [ Fri Sep 04, 2009 8:43 am ] |
Post subject: | Re: what aluminum grade to use? |
[quote="DeathMetalDukk"]I know this from shopping for aluminum for my floor, the strongest is somewhat brittle and a good hit could crack it instead of bend it, vice versa with the weakest, could be too flimsy.quote] Bingo 5052 is probably the most well rounded alloy of aluminum you can get meaning it has great anti-corrsion properties as well as can bend fairly easy but not too flimsy I dont know it for a fact but probably the most common and easier to find unless you deal with a large supplier |
Author: | jrp267 [ Sun Sep 20, 2009 7:35 am ] |
Post subject: | Re: what aluminum grade to use? |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |