Author |
Message |
Rclinetx
MMT Member
Joined: Wed Oct 02, 2013 9:28 pm Posts: 18 Location: Longview,TX
|
 **Fishing/Duck boat build ,has this been done?**
Alright folks,
Here is what I am brain storming with. I love to fish and to duck hunt.
Has anyone done a rear deck like this? Will it work? Am I living a pipe dream?
Critique my idea!!
Sent from my iPhone using Tapatalk -
|
Mon Oct 14, 2013 6:51 pm |
|
 |
TexasGreenHead
MMT Pro Member
Joined: Sun Jan 13, 2013 12:17 am Posts: 56 Location: Cypress, Texas
|
 Re: **Fishing/Duck boat build ,has this been done?**
Pete Willett at WC Custom would be the builder to talk to. I think he's in East Texas close to you as well. Good luck!
_________________ GD 16x60 SD pushed by a Stock GD 35HP SD
|
Mon Oct 14, 2013 7:08 pm |
|
 |
North LA Hunter
MMT Elite Member
Joined: Mon Aug 02, 2010 8:39 pm Posts: 6976 Location: West Monroe, LA
|
 Re: **Fishing/Duck boat build ,has this been done?**
Go with a cc rig if you like to fish. Have a full rear deck up to the console. Or you could do a side console.
Sent from my beeper.
|
Mon Oct 14, 2013 7:33 pm |
|
 |
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: **Fishing/Duck boat build ,has this been done?**
You plan on hunting out the boat?
|
Mon Oct 14, 2013 7:43 pm |
|
 |
eljefe
MMT Elite Member
Joined: Thu Jan 13, 2011 7:32 am Posts: 5210 Location: Beaumont Texas
|
 Re: **Fishing/Duck boat build ,has this been done?**
Get a removable deck...something you can take out when hunting..
sent from the former Republic of Texas.
_________________ You can't see the sunrise if your eyes are closed. dying aint much of a livin....
Black ops IITX marshstalker
1840 WC www.wccustomboats.com fuel injected 25 GTR
|
Mon Oct 14, 2013 7:45 pm |
|
 |
Rclinetx
MMT Member
Joined: Wed Oct 02, 2013 9:28 pm Posts: 18 Location: Longview,TX
|
 Re: **Fishing/Duck boat build ,has this been done?**
Rarely hunt out of the boat.
I seen the removable deck from Gator Trax I like that idea.
|
Mon Oct 14, 2013 8:20 pm |
|
 |
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: **Fishing/Duck boat build ,has this been done?**
Build it like a bass boat with a side console. 4' front deck, and 4' back deck. Should be plenty room to fish. Go ahead and plan on modding the motor with that big boat.
|
Mon Oct 14, 2013 8:21 pm |
|
 |
Woodiebuster
MMT Elite Member
Joined: Wed Mar 03, 2010 7:00 pm Posts: 6060 Location: Choudrant, La
|
 Re: **Fishing/Duck boat build ,has this been done?**
Your tiller handle will probly hit the deck if you smack a stump. It hurts your hand too
_________________ CSM Custom 18x42 Battleship with a 36 PD beating you to the hole My Rig (Old Motor) viewtopic.php?f=5&t=45193
(New Motor) viewtopic.php?f=5&t=54733 Stumps Fear Me
|
Mon Oct 14, 2013 8:56 pm |
|
 |
willett
MMT Sponsor
Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
 Re: **Fishing/Duck boat build ,has this been done?**
Here is one we built set up similar to a crest liner utility hunt/fish boat
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com
WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
|
Mon Oct 14, 2013 9:25 pm |
|
 |
JLACOUR
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:18 pm Posts: 4915 Location: Lake Jackson, TX
|
 Re: **Fishing/Duck boat build ,has this been done?**
_________________ 37 PD EFI FPR 18x48 Tiller SOLD -- 36 PD EFI FPR 18x48 Stick Steer SOLD -- 27 PD FPR 16x36 Skiff
|
Mon Oct 14, 2013 9:38 pm |
|
 |
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: **Fishing/Duck boat build ,has this been done?**
Perty much what I had in mind mr. Pete. Nice build!
|
Mon Oct 14, 2013 10:10 pm |
|
 |
diddyduck
MMT 1000 Club
Joined: Mon Sep 02, 2013 10:24 pm Posts: 2624 Location: ponchatoula, la
|
 Re: **Fishing/Duck boat build ,has this been done?**
|
Mon Oct 14, 2013 10:14 pm |
|
 |
banded-mallard
MMT 1000 Club
Joined: Wed Oct 07, 2009 8:18 pm Posts: 4310
|
 Re: **Fishing/Duck boat build ,has this been done?**
|
Tue Oct 15, 2013 4:59 am |
|
 |
DuckHunter251
MMT Pro Member
Joined: Mon Jan 24, 2011 5:00 pm Posts: 233 Location: Milledgeville, GA
|
 Re: **Fishing/Duck boat build ,has this been done?**
Very nice Pete.
_________________ 1846 GTB with GTR 35
|
Tue Oct 15, 2013 12:16 pm |
|
 |
Will
MMT Elite Member
Joined: Fri Jul 08, 2011 1:54 pm Posts: 8133
|
 Re: **Fishing/Duck boat build ,has this been done?**
Get a regular lay out, then have a back deck built with legs that is removable, lock it down in the boat with turn buckles.
_________________ Before the internet, the majority of the village idiots stayed in their villages.
|
Tue Oct 15, 2013 12:42 pm |
|
 |
willett
MMT Sponsor
Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
 Re: **Fishing/Duck boat build ,has this been done?**
Here is one we built for tiller handle. Deck is fastened with wing bolts into riv nuts and can move tomiddle while driving and be used as a passenger seat then when get where going can be used as rear deck for fishing.
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com
WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
|
Tue Oct 15, 2013 2:26 pm |
|
 |
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: **Fishing/Duck boat build ,has this been done?**
Nice. 
|
Tue Oct 15, 2013 2:33 pm |
|
 |
willett
MMT Sponsor
Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
 Re: **Fishing/Duck boat build ,has this been done?**
This is one we are finishing rigging this week. 1854 3/16 bottom with 30" tall sides. 6' front deck 3' rear deck Side console with seat/livewell in front of it Rear bench seat Front storage hatch and front gun/bow box about 20" wide, 8" deep
Will have removable bow fishing deck also
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com
WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
|
Tue Oct 15, 2013 3:01 pm |
|
 |
willett
MMT Sponsor
Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
 Re: **Fishing/Duck boat build ,has this been done?**
This is one we are finishing rigging this week. 1854 3/16 bottom with 30" tall sides. 6' front deck 3' rear deck Side console with seat/livewell in front of it Rear bench seat Front storage hatch and front gun/bow box about 20" wide, 8" deep
Will have removable bow fishing deck also
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com
WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
|
Tue Oct 15, 2013 3:01 pm |
|
 |
270Handiman
MMT 1000 Club
Joined: Thu Dec 29, 2011 10:46 pm Posts: 2342 Location: Mandeville, LA
|
 Re: **Fishing/Duck boat build ,has this been done?**
Now that's a feaking tank! Begging for duals.....or a 150!
|
Tue Oct 15, 2013 3:25 pm |
|
 |
diddyduck
MMT 1000 Club
Joined: Mon Sep 02, 2013 10:24 pm Posts: 2624 Location: ponchatoula, la
|
 Re: **Fishing/Duck boat build ,has this been done?**
|
Tue Oct 15, 2013 3:28 pm |
|
 |
willett
MMT Sponsor
Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
 Re: **Fishing/Duck boat build ,has this been done?**
Yea he is going to try it out stock first.
The camo boat I first posted is an 1860 with 3/16 bottom, 24" sides, full floor, 30 gal livewell in rear, 20 gal fuel tank in front, and full floatation. With stock motor it pushed 3 people and 10 gallons of fuel 22. With stage 2 mods and same load pushed it 25. All on calm days in 10-15' of water.
For my partner (320 lbs) We built a 2160 3/16 bottom 9 - 2x2 long runners 36" tall sides 6" thick wall pipe for front nose 6' front deck Center console 32" rear hunt deck with diamond plate 12" enclosed cat walks Removable rear deck
Set up for duals but just have a single stock motor on it right now
True numbers with a little wear on the prop in a 15 mph wind with just me ran 23 with the wind and 22 against
With me and my partner, again he's easy 320 pounds, 22 with the wind and 21 against the wind. And this thing is so big it catches a lot of wind.
He and I both know its not ideal with stock motor but we were super surprised it did that well with a stock motor. He is saving for another motor though. I need to get some more pics of it because we are just working on it a tiny bit at a time but here are some pics of when we were working on the hull itself
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com
WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
|
Tue Oct 15, 2013 4:58 pm |
|
 |
JLACOUR
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:18 pm Posts: 4915 Location: Lake Jackson, TX
|
 Re: **Fishing/Duck boat build ,has this been done?**
You build a hell of a boat Pete, but I'd have to see those speeds with my own eyes to believe it.
_________________ 37 PD EFI FPR 18x48 Tiller SOLD -- 36 PD EFI FPR 18x48 Stick Steer SOLD -- 27 PD FPR 16x36 Skiff
|
Tue Oct 15, 2013 5:14 pm |
|
 |
willett
MMT Sponsor
Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
 Re: **Fishing/Duck boat build ,has this been done?**
I know its hard to believe. Will video GPS next time we run it. And will have new prop on it then too.
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com
WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
|
Tue Oct 15, 2013 5:52 pm |
|
 |
jp1854
MMT Member
Joined: Wed Jun 27, 2012 10:38 am Posts: 26 Location: Lockport Louisiana
|
 Re: **Fishing/Duck boat build ,has this been done?**
here is my boat sounds like what your looking for
Sent from my iPhone using Tapatalk -
|
Wed Oct 23, 2013 9:26 pm |
|
 |
petrel
MMT F.E.
Joined: Mon Jan 11, 2010 9:51 am Posts: 770 Location: NVA
|
 Re: **Fishing/Duck boat build ,has this been done?**
I'm not knocking it, but what is the purpose of removing the corners of the transom?
I really like the console design. Looks like a Yellowfin or a Sea Vee!
_________________ Phowler 2066 w/ E5 37 ProDrive w/ Illowa Marine Heads MoMarsh Fatboy/2 Honda
|
Thu Oct 24, 2013 6:02 am |
|
 |
cr244
MMT 1000 Club
Joined: Sat Jun 16, 2012 9:43 am Posts: 1504 Location: Watoola, Alabama
|
 Re: **Fishing/Duck boat build ,has this been done?**
pete, the camo boat is nice. i really like the bass boat layout very good craftsmanship. what is your partner going to use the barge for? that thing is cool as shiat. 21' and 36'' sides thats a monster you need to post up more pics of that thing what is the beam width on it? this boat is bad azz
|
Thu Oct 24, 2013 7:00 am |
|
 |
eljefe
MMT Elite Member
Joined: Thu Jan 13, 2011 7:32 am Posts: 5210 Location: Beaumont Texas
|
 Re: **Fishing/Duck boat build ,has this been done?**
_________________ You can't see the sunrise if your eyes are closed. dying aint much of a livin....
Black ops IITX marshstalker
1840 WC www.wccustomboats.com fuel injected 25 GTR
|
Thu Oct 24, 2013 7:07 am |
|
 |
petrel
MMT F.E.
Joined: Mon Jan 11, 2010 9:51 am Posts: 770 Location: NVA
|
 Re: **Fishing/Duck boat build ,has this been done?**
ok, thx
_________________ Phowler 2066 w/ E5 37 ProDrive w/ Illowa Marine Heads MoMarsh Fatboy/2 Honda
|
Thu Oct 24, 2013 8:17 am |
|
 |
dfou
MMT 1000 Club
Joined: Sun Dec 12, 2010 12:38 am Posts: 3986 Location: Pville, La
|
 Re: **Fishing/Duck boat build ,has this been done?**
|
Thu Oct 24, 2013 8:42 am |
|
 |
North LA Hunter
MMT Elite Member
Joined: Mon Aug 02, 2010 8:39 pm Posts: 6976 Location: West Monroe, LA
|
 Re: **Fishing/Duck boat build ,has this been done?**
I put a sport deck on mine because something got messed up on my measurement for the hd. The front of the GTR frame was hitting the false transom so I had to do it like that.
It's better than a regular transom for keeping water out of the boat but still not as good as a hunt deck.
The way it was planned.
What I ended up with.
Sent from my beeper.
|
Thu Oct 24, 2013 8:57 am |
|
 |
|