MudmotorTalk.com
http://www.mudmotortalk.com/mmt_v2/

Pulled the trigger on a new Prodigy
http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=46712
Page 1 of 1

Author:  careybrowning [ Thu Oct 24, 2013 8:23 am ]
Post subject:  Pulled the trigger on a new Prodigy

Just pulled the trigger on a new Prodigy 1854 V Bow. I was up there this week looking around. Chad has some really nice looking designs. He had a 1954 that looked awesome that I'm going to model my 1854 after. The fit and finish on this boat was awesome. Not sure who this one going to, but he is getting a sweet rig.
I ordered...
1854 Modified V
Tapered Chine
Sport Deck
Spud poles thru hull
tall transom
smooth floor (cross braces level with the floor)
catwalks all the way around
drivers box
Going to leave the seat bases off the floor in mine though
adjustable transducer bracket on the back
switch panel in front of the drivers box
front deck hatch
Gator Glide
hydro turf floors

I can't wait to get it built. I just have to decide what motor to put on it (and save up some more cash)









Author:  careybrowning [ Thu Oct 24, 2013 8:27 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Double post. My bad. think I got it fixed though

Author:  SCmudder7071 [ Thu Oct 24, 2013 8:43 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Good deal. He's building some good looking boats for sure. Just waiting on a quote from him. Who knows, might own a boat before the spring.

Author:  Prodigy [ Thu Oct 24, 2013 8:48 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

SC - sent u a pm sir

Author:  SCmudder7071 [ Thu Oct 24, 2013 8:59 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

You're good peoples, even if you are from GA :)

Author:  Prodigy [ Thu Oct 24, 2013 9:07 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Actually im from Houma, LA............... lol

Author:  barnes_53 [ Thu Oct 24, 2013 9:12 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Is there a website for these boats that we can look at?

Author:  Prodigy [ Thu Oct 24, 2013 9:13 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

working on that now............. we are on facebook w some pics for now prodigyboats on facebook will get u a look at several of our boats.......... any questions i can gladly answer. Tony has my check for sponsorship on MMT and im sending him a banner shortly........... just for the guys that sweat that stuff. lol

Author:  Swamp dog [ Thu Oct 24, 2013 10:01 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Sweet looking boats.

Author:  mudxxed [ Thu Oct 24, 2013 11:08 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Yall build some real nice boats

Author:  North LA Hunter [ Thu Oct 24, 2013 11:18 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Nice boats for sure! I like that camo on that boat! I'm guessing that's bottomland?


Sent from my beeper.

Author:  swampshooter [ Thu Oct 24, 2013 11:34 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Nice rig

Author:  dillakilla12 [ Thu Oct 24, 2013 11:58 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Congratulations! Im bout to finish my blind up and work on some wet sounds on mine!

True dat!!

Author:  Prodigy [ Fri Oct 25, 2013 8:00 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Tks guys............

Author:  lunacris [ Fri Oct 25, 2013 10:13 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Looking good chad

Nice rig carey

Author:  eljefe [ Fri Oct 25, 2013 2:47 pm ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Looks like a round chine.....good looking boats for sure.....

sent from the former Republic of Texas.

Author:  Bigrich [ Fri Oct 25, 2013 2:49 pm ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Good looking boat

Author:  Bigrich [ Fri Oct 25, 2013 2:49 pm ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Good looking boat

Author:  Prodigy [ Fri Oct 25, 2013 2:54 pm ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Triple Taper Chine

Author:  mizzippi jb [ Fri Oct 25, 2013 3:47 pm ]
Post subject:  Re: Pulled the trigger on a new Prodigy

These paint jobs are sick on these rigs! Prodigy is not a typical backyard builder y'all. Chad jumped in with both feet and did it right! First class operation. I may own one one day

Sent from my DROID RAZR using Tapatalk 2

Author:  krogers [ Fri Oct 25, 2013 7:03 pm ]
Post subject:  Re: Pulled the trigger on a new Prodigy


Author:  mizzippi jb [ Fri Oct 25, 2013 7:27 pm ]
Post subject:  Re: Pulled the trigger on a new Prodigy


Author:  MNGunner [ Sat Oct 26, 2013 6:08 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Chad,

That's a sweet design! Nice Mod-V front and I like the open hunt deck.

How do you do your cross braces? They look flush with the floor, but maybe that's just the camera angle.

Author:  Prodigy [ Sat Oct 26, 2013 6:27 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

We offer bracing a few diff ways. This boat has recessed bracing. We can also do the 2" above floor bracing.

Author:  cr244 [ Sat Oct 26, 2013 7:41 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

that triple taper chine is basically a round chine. its bad ass to me. chad your builds are 1st. class for sure keep up the good work.

Author:  VooDoo Daddy [ Sat Oct 26, 2013 8:07 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

Nice looking boat. I think my next boat will be a hybrid V front. Does this builder do round chines? Did someone say where they were located? Ok, I see Georgia

On another note, I have that camo pattern hydro turf in my boat. I deal with imaging everyday in one of my businesses. I have taken special eye test for imaging at labs and they said I can see color, shade and pattern better than over 99% of the public. I swear sometimes I am on an acid trip with that camo. In the bright sun, the pattern seems to get my brain to see it hover an inch or two off the surface and tilt. Now if it were to lift up and float around and spin off into space, I know I am on some LSD or something. :lol:

Author:  dillakilla12 [ Sat Oct 26, 2013 12:07 pm ]
Post subject:  Re: Pulled the trigger on a new Prodigy

^holy shit!

True dat!!

Author:  Prodigy [ Sat Oct 26, 2013 3:14 pm ]
Post subject:  Re: Pulled the trigger on a new Prodigy


Author:  barnes_53 [ Sat Oct 26, 2013 8:01 pm ]
Post subject:  Re: Pulled the trigger on a new Prodigy

I see a heavy Gator Trax influence in these boats.

Author:  Prodigy [ Sat Oct 26, 2013 8:24 pm ]
Post subject:  Re: Pulled the trigger on a new Prodigy

there are def influences from all over the place in our boats. we are also going to lay down some influences as we grow and expand into diff options etc.

Author:  VooDoo Daddy [ Sat Oct 26, 2013 8:33 pm ]
Post subject:  Re: Pulled the trigger on a new Prodigy


Author:  Prodigy [ Sat Oct 26, 2013 8:54 pm ]
Post subject:  Re: Pulled the trigger on a new Prodigy

1954 Prodigy
MB 5500 MAG

Planes almost instantly and is doing 20MPH in no time.

33.8 top speed today :mrgreen:

31.1 w 4 guys (260, 250, 220, 200) ;)

https://www.facebook.com/photo.php?v=179306505594570

Author:  d_white [ Sat Oct 26, 2013 9:24 pm ]
Post subject:  Re: Pulled the trigger on a new Prodigy


Author:  dfou [ Sat Oct 26, 2013 9:28 pm ]
Post subject:  Pulled the trigger on a new Prodigy


Author:  MollyBrown [ Mon Oct 28, 2013 5:49 am ]
Post subject:  Re: Pulled the trigger on a new Prodigy

I got an 1854 on order and can't wait to get that sucker in some Texas water.. Chad has been great to deal with and has so many great ideas. I haven't seen one of his boats yet that is identical to the other. A truly custom boat!!! You want it, he will do his best to build it.

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/