Author |
Message |
El Cheapo
New Member
Joined: Wed Feb 04, 2009 11:38 pm Posts: 2
|
more hydroturf questions
I have a couple sheets of HT on the way, and was wondering if those of you with go devil boats are installing the turf over the rivets on the floor..reason I ask is about 1/2 of my floor rivets have popped off and need to be replaced, and I am afraid if I install the HT over the rivets (once I replace the busted ones) I will not be able to identify/replace them if they pop off in the future, which seems to be highly likely..
What do you all think? I am removing the floor anyhow to check the foam and install seat bases anyway...should i install the turf and then rivet the floor in? Any drawbacks to that?
thanks!
|
Wed Feb 04, 2009 11:50 pm |
|
|
willett
MMT Sponsor
Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
Re: more hydroturf questions
I've done two boats...one on ProDrive boat and never had any problems with rivets coming out
Now on phowler boat some rivets have popped out and cant get to them without pulling all hyrdroturf up
RC also advices if you have chance to slice your hull open on rocks or something like that or EVER think you'll need to get under the floor panels then leave the rivets exposed
I shoulda taken that advice this time because now need to get the back peice of my floor up to beat hook out...take advice some give and live and learn from mistakes
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com
WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
|
Thu Feb 05, 2009 9:34 am |
|
|
cash
MMT Pro Member
Joined: Tue Jan 13, 2009 7:49 pm Posts: 352 Location: Ponchatoula, La
|
Re: more hydroturf questions
I was wondering the same thing when I put mine down.
I think I recall someone saying on the old site something about the rivets melting the hydroturf??
_________________ 1854 Gatortail CC . 35 GTR Stage 2
|
Thu Feb 05, 2009 1:06 pm |
|
|
LOWRY
MMT Pro Member
Joined: Wed Jan 14, 2009 7:18 am Posts: 296
|
Re: more hydroturf questions
Can you not feel where the rivets are through the HT?
Looks like you could take a piece of tubing and cut a plug out where the rivet is and leave the HT attached to the flooring.
_________________ OneBigAssMistakeAmerica
|
Thu Feb 05, 2009 1:11 pm |
|
|
basinhunter
MMT 1000 Club
Joined: Tue Jan 13, 2009 6:22 pm Posts: 1642 Location: Morgan City, LA
|
Re: more hydroturf questions
_________________ Pro Drive m'fers
|
Thu Feb 05, 2009 2:03 pm |
|
|
willett
MMT Sponsor
Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
Re: more hydroturf questions
depends on the size of the rivet head
Like on my PD boat you could feel them b/c they had the big heads
on my boat now they used small heads (probably why floor came loose)
Cash dunno where you heard that bout rivets melting HT but how exactly would that happen?
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com
WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
|
Thu Feb 05, 2009 5:12 pm |
|
|
coastal
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:29 am Posts: 1890 Location: South TX
|
Re: more hydroturf questions
Willow Dam...Boy...What kind of seas you be crossing in the Timebandit.You done wore that boat out in one season?Broken rivets and hooks in da bottom.I thought that boat was a bad azz wave cracking mofo.Sounds like you should of keep your PD hull.
_________________ I will keep my gun's,freedom and money.You can keep your change!
|
Thu Feb 05, 2009 7:26 pm |
|
|
cash
MMT Pro Member
Joined: Tue Jan 13, 2009 7:49 pm Posts: 352 Location: Ponchatoula, La
|
Re: more hydroturf questions
_________________ 1854 Gatortail CC . 35 GTR Stage 2
|
Thu Feb 05, 2009 8:10 pm |
|
|
willett
MMT Sponsor
Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
Re: more hydroturf questions
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com
WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
|
Thu Feb 05, 2009 10:24 pm |
|
|
coastal
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:29 am Posts: 1890 Location: South TX
|
Re: more hydroturf questions
You dont get thirsty in rough water do you?
_________________ I will keep my gun's,freedom and money.You can keep your change!
|
Thu Feb 05, 2009 10:32 pm |
|
|
willett
MMT Sponsor
Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
Re: more hydroturf questions
just glad it wasnt salt water lol
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com
WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
|
Thu Feb 05, 2009 10:33 pm |
|
|
Gatorpoint
MMT 1000 Club
Joined: Tue Jan 13, 2009 8:09 pm Posts: 1175 Location: A slough behind you, TEXAS
|
Re: more hydroturf questions
_________________ 1854 Brotha Breaux Bateau pullin' a 35 GT arrrrahhh! Willett Welding custom boat trailer
A$$, Ca$h, or Ga$ -- NO FREE RIDES!!
|
Thu Feb 05, 2009 10:34 pm |
|
|
coastal
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:29 am Posts: 1890 Location: South TX
|
Re: more hydroturf questions
_________________ I will keep my gun's,freedom and money.You can keep your change!
|
Thu Feb 05, 2009 10:38 pm |
|
|
willett
MMT Sponsor
Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
Re: more hydroturf questions
atleast it was like 70 degrees on the way back that day it woulda been HELL freezin over if it wasnt
Going with waves you never get wet at all and water breaks to the sides like magic just hell going into waves/wind
If didnt get wet like that it would be a great boat because it really is so much smoother then rampin and smackin waves with a flat and the day me and crews went across lake if we were in a flat no doubt we would have waves crashin over the bow bout the only thing that saved us that day from bow crash was without a doubt the V and tellin bout it aint nothin like experiencin it like crews said wish we had had a video camera with us that day
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com
WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
|
Thu Feb 05, 2009 10:43 pm |
|
|
|