MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
The midget boat http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=47424 |
Page 1 of 3 |
Author: | North LA Hunter [ Fri Nov 15, 2013 3:51 pm ] |
Post subject: | The midget boat |
Just started my little baby midget boat. 1242 with 18" sides all .090. Going to put 3 1x2 braces in the bottom with maybe 2 2x2 or 1x2 braces going across. Got a 4'6" rake and going to have about a 18-24" deck. No seats or boxes in it. Might build a base to pull in and out when I need for me but going to have a lt on it for now and no need to sit!!! Hoping to have it in the water next weekend if I can get the bottom braces rolled Monday. Sent from my beeper. |
Author: | Bigbuckfever [ Fri Nov 15, 2013 4:25 pm ] |
Post subject: | Re: The midget boat |
Pretty cool! Sent from my DROID RAZR using Tapatalk 2 |
Author: | dfou [ Fri Nov 15, 2013 4:38 pm ] |
Post subject: | Re: The midget boat |
Dwarf shoe? Sent from my iPhone using |
Author: | North LA Hunter [ Fri Nov 15, 2013 4:53 pm ] |
Post subject: | Re: The midget boat |
Author: | Trousertrout [ Fri Nov 15, 2013 4:55 pm ] |
Post subject: | Re: The midget boat |
That looks like an awesome man cave |
Author: | btmannin [ Fri Nov 15, 2013 5:03 pm ] |
Post subject: | Re: The midget boat |
![]() |
Author: | North LA Hunter [ Fri Nov 15, 2013 5:11 pm ] |
Post subject: | Re: The midget boat |
Author: | nasty [ Fri Nov 15, 2013 9:36 pm ] |
Post subject: | Re: The midget boat |
May as we'll build a skiff... With a bottom like that |
Author: | bayouboy [ Fri Nov 15, 2013 10:32 pm ] |
Post subject: | Re: The midget boat |
You have a lot of nice ladders!! Get high much? ![]() |
Author: | pokey79 [ Fri Nov 15, 2013 10:35 pm ] |
Post subject: | Re: The midget boat |
5 ladders 2 longtails and a stolen sigh ![]() ![]() |
Author: | bayouboy [ Fri Nov 15, 2013 11:12 pm ] |
Post subject: | Re: The midget boat |
Six ladders, old school green one against the tin in the center! Im telling ya, this guy likes to get high!! lol |
Author: | Walkers Bay Synd [ Fri Nov 15, 2013 11:30 pm ] |
Post subject: | Re: The midget boat |
Author: | North LA Hunter [ Sat Nov 16, 2013 10:01 am ] |
Post subject: | Re: The midget boat |
Author: | cr244 [ Sat Nov 16, 2013 11:09 am ] |
Post subject: | Re: The midget boat |
be sure to post build pics. that is going to be a sweet little ride for sure |
Author: | North LA Hunter [ Tue Nov 19, 2013 7:48 am ] |
Post subject: | Re: The midget boat |
Well I can't get my braces rolled until Friday. It's on hold until then! Sent from my beeper. |
Author: | bayouboy [ Thu Nov 21, 2013 1:38 pm ] |
Post subject: | Re: The midget boat |
Author: | eljefe [ Thu Nov 21, 2013 1:41 pm ] |
Post subject: | Re: The midget boat |
i thought this was a thread on take ems new boat or something.... ![]() |
Author: | lastchance [ Thu Nov 21, 2013 1:57 pm ] |
Post subject: | |
^Lmfao! |
Author: | North LA Hunter [ Mon Nov 25, 2013 12:29 pm ] |
Post subject: | Re: The midget boat |
Well went ahead and started my giant boat so I can get my braces rolled at the same time. 2048 3/16 bottom cc rig. Sent from my beeper. |
Author: | SETx Longtail [ Mon Nov 25, 2013 12:50 pm ] |
Post subject: | Re: The midget boat |
Whats gonna be behind those two rigs? |
Author: | North LA Hunter [ Mon Nov 25, 2013 1:03 pm ] |
Post subject: | Re: The midget boat |
35 GTR on the big boat and 12 hp lt on little boat. Sent from my beeper. |
Author: | North LA Hunter [ Mon Nov 25, 2013 7:29 pm ] |
Post subject: | Re: The midget boat |
Well I couldn't wait on the braces so I went ahead and started on it. Got sides tacked on and pipe in the front. Sent from my beeper. |
Author: | North LA Hunter [ Tue Nov 26, 2013 9:50 am ] |
Post subject: | Re: The midget boat |
Deck and grab rails put on. Used a piece of gunnel for the brace at the end of the deck and turned out pretty nice looking! Sent from my beeper. |
Author: | eljefe [ Tue Nov 26, 2013 10:48 am ] |
Post subject: | Re: The midget boat |
looking good!!! that lil boat will be able to get in some skinny ass shit!! |
Author: | BERNIE255 [ Tue Nov 26, 2013 11:10 am ] |
Post subject: | Re: The midget boat |
nice boat! |
Author: | North LA Hunter [ Tue Nov 26, 2013 5:06 pm ] |
Post subject: | The midget boat |
Braces and transom tacked on. And I can still pick the front and the back up with one hand without a strain. Sent from my beeper. |
Author: | BERNIE255 [ Thu Nov 28, 2013 2:38 pm ] |
Post subject: | Re: The midget boat |
That boat would be bad ass with a 12hp copperhead on it! |
Author: | North LA Hunter [ Thu Nov 28, 2013 3:21 pm ] |
Post subject: | Re: The midget boat |
Author: | BERNIE255 [ Thu Nov 28, 2013 4:47 pm ] |
Post subject: | Re: The midget boat |
that boat your building reminded me of this one that was built by cottonmouth 10x36. sick little boat, they put a 6hp copperhead and was getting top speeds from 23-25mph |
Author: | cupped up [ Thu Nov 28, 2013 6:21 pm ] |
Post subject: | Re: The midget boat |
That tiny copperhead had enough prop to push that boat 28 mph? That's hard to believe. |
Author: | BERNIE255 [ Thu Nov 28, 2013 6:38 pm ] |
Post subject: | Re: The midget boat |
Author: | cupped up [ Thu Nov 28, 2013 6:40 pm ] |
Post subject: | Re: The midget boat |
That's pretty badass then. I just didn't think it would swing enough prop to see that MPH. Sweet. |
Author: | BERNIE255 [ Thu Nov 28, 2013 6:44 pm ] |
Post subject: | Re: The midget boat |
yea i didnt mean to give the wrong top speeds. but 25mph on a 1036 is badass |
Author: | ak [ Thu Nov 28, 2013 6:54 pm ] |
Post subject: | Re: The midget boat |
25 on a 1036 would feel like 45 I put my 20hp on my 1236 and i was skeered |
Author: | BERNIE255 [ Thu Nov 28, 2013 7:01 pm ] |
Post subject: | Re: The midget boat |
one bump and your out lol |
Author: | ak [ Thu Nov 28, 2013 8:54 pm ] |
Post subject: | Re: The midget boat |
or a sharp turn |
Author: | BERNIE255 [ Thu Nov 28, 2013 9:06 pm ] |
Post subject: | Re: The midget boat |
haha |
Author: | cupped up [ Thu Nov 28, 2013 9:12 pm ] |
Post subject: | Re: The midget boat |
My pops has a 12' baja scat cat with a 40 merc with a little work and a chopper prop...that thing's made to go fast, and a little over 50 in it is hairy so I could imagine a baby skiff. But then again, that little 12' boat went 94 mph with a 225 Pro Max in the early 90's... ![]() |
Author: | FRANKtheTAU [ Thu Nov 28, 2013 10:01 pm ] |
Post subject: | Re: The midget boat |
A 225 on a 12' boat? I'd love to see how a 12' boat floats a 225 outboard! |
Author: | cupped up [ Thu Nov 28, 2013 10:40 pm ] |
Post subject: | Re: The midget boat |
13', my mistake. This is a fiberglass catamaran we're talkin bout, and a 2.4L 225...not a 3L like the big ones today. They weren't as heavy. Ill see if I can find a pic of it. I think everything was up under the bow, maybe some extra weight too. It looked dumb. |
Page 1 of 3 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |