| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| transom angle http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=52733 |
Page 1 of 1 |
| Author: | debo [ Sun Apr 27, 2014 2:31 am ] |
| Post subject: | transom angle |
Have a new boat and wondering if my transom angle will be ok. Transom angle is 22*. I will put the new gtr 35 with the new style 30" lower. Should I have any issues running that engine on my boat? I searched different threads here some say 20* others say 23* any help will be appreciated. |
|
| Author: | cupped up [ Sun Apr 27, 2014 4:49 am ] |
| Post subject: | Re: transom angle |
What's the transom height? |
|
| Author: | debo [ Sun Apr 27, 2014 5:04 am ] |
| Post subject: | Re: transom angle |
20 or 21 I would have to check and see |
|
| Author: | cupped up [ Sun Apr 27, 2014 5:52 am ] |
| Post subject: | Re: transom angle |
22 oughta be just fine. I think 20 is ideal but I know of people who've ran 22. |
|
| Author: | debo [ Sun Apr 27, 2014 11:38 am ] |
| Post subject: | Re: transom angle |
Thanks for the help I hope it runs ok just had the hull built it bothered me to find out it was 22* instead of 20* |
|
| Author: | OwenDickeson [ Sun Apr 27, 2014 11:52 am ] |
| Post subject: | Re: transom angle |
You will be fine. Probably need to run it on the top pin. |
|
| Author: | debo [ Sun Apr 27, 2014 12:37 pm ] |
| Post subject: | Re: transom angle |
Thanks Owen for the help |
|
| Author: | Puddlejumper19 [ Sun Apr 27, 2014 6:19 pm ] |
| Post subject: | Re: transom angle |
| Author: | debo [ Sun Apr 27, 2014 6:31 pm ] |
| Post subject: | Re: transom angle |
Thanks good to see feed back from someone who is running the same angle and it works makes me feel better about it now |
|
| Author: | DuckHunterF250 [ Sun Apr 27, 2014 7:06 pm ] |
| Post subject: | Re: transom angle |
ive ran 23 on several boats and they run just as good but with a little more dig. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|