MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
Custom boat for an outboard http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=54701 |
Page 1 of 1 |
Author: | bassinsouthla [ Thu Jul 10, 2014 8:19 pm ] |
Post subject: | Custom boat for an outboard |
I am looking for suggestions as to who builds a good custom boat with large front deck with storage and rod box for an outboard at an affordable price. I am looking to have someone build something no larger than an 18 x 54 for a tiller. Possibly a tunnel but seems like someone really needs to know how to build one in order for it to perform correctly. Any info would be appreciated. |
Author: | nasty [ Wed Jul 16, 2014 4:40 pm ] |
Post subject: | Re: Custom boat for an outboard |
Capt. jj.. hes built a few tunnelhulls. Or dfou |
Author: | msm8281 [ Wed Jul 16, 2014 4:43 pm ] |
Post subject: | Re: Custom boat for an outboard |
Eric Romero(custom aluminium boats) in Lydia La. Has experience with tunnels. |
Author: | careybrowning [ Thu Jul 17, 2014 11:15 am ] |
Post subject: | Re: Custom boat for an outboard |
I just tested a nice 1854 with 24" sides Prodigy with a 70 yamaha on it this very morning. It was a sweet setup. Kinda made me miss outboards. |
Author: | DUCK HEARSE [ Thu Jul 17, 2014 11:16 am ] |
Post subject: | Re: Custom boat for an outboard |
Author: | careybrowning [ Thu Jul 17, 2014 11:25 am ] |
Post subject: | Re: Custom boat for an outboard |
It ran a solid 38 this morning. The rpms were low though so it needs to try some different props to get it dialed in right. It was fun though after running mud motors for so long. |
Author: | Prodigy [ Thu Jul 17, 2014 11:43 am ] |
Post subject: | Re: Custom boat for an outboard |
38 w 2 guys, 2 coolers, 2 large optimas, trolling motor, 20 gallons of fuel.......... turning 5600 rpms.........need to drop to a 15 pitch power tech to get the rpms up more........... |
Author: | msm8281 [ Thu Jul 17, 2014 11:46 am ] |
Post subject: | Re: Custom boat for an outboard |
5600 sounds right with that load. Empty you should be close to 6000. |
Author: | Prodigy [ Thu Jul 17, 2014 11:48 am ] |
Post subject: | Re: Custom boat for an outboard |
Gonna c what the 15 does........these F70's are really sweet............... |
Author: | Frog [ Thu Jul 17, 2014 12:51 pm ] |
Post subject: | Re: Custom boat for an outboard |
How much does the F70 cost with binnacle and set up for steering ? |
Author: | Prodigy [ Thu Jul 17, 2014 6:42 pm ] |
Post subject: | Re: Custom boat for an outboard |
Call me tomorrow Sent from my iPhone using Tapatalk |
Author: | DUCK HEARSE [ Thu Jul 17, 2014 6:55 pm ] |
Post subject: | Re: Custom boat for an outboard |
Author: | mizzippi jb [ Thu Jul 17, 2014 7:03 pm ] |
Post subject: | Re: Custom boat for an outboard |
Is that shep's boat? |
Author: | Prodigy [ Thu Jul 17, 2014 7:05 pm ] |
Post subject: | Re: Custom boat for an outboard |
It is.. Got another one also but w 21" sides out there and building 2 more now. Sent from my iPhone using Tapatalk |
Author: | mizzippi jb [ Thu Jul 17, 2014 7:08 pm ] |
Post subject: | Re: Custom boat for an outboard |
That was the one outside in the lot today I guess...(sheps) |
Author: | Prodigy [ Thu Jul 17, 2014 7:14 pm ] |
Post subject: | Re: Custom boat for an outboard |
Yes sir Sent from my iPhone using Tapatalk |
Author: | Nate [ Fri Jul 18, 2014 5:20 am ] |
Post subject: | Re: Custom boat for an outboard |
Prodigy- is that a tunnel hull? |
Author: | nocemdead [ Fri Jul 18, 2014 11:54 am ] |
Post subject: | Re: Custom boat for an outboard |
Thirdtimesacharm does tunnels |
Author: | DUCK HEARSE [ Fri Jul 18, 2014 3:27 pm ] |
Post subject: | Re: Custom boat for an outboard |
Call Robert at extreme metal fabrication |
Author: | Prodigy [ Fri Jul 18, 2014 10:08 pm ] |
Post subject: | Re: Custom boat for an outboard |
That one doesn't have a tunnel but we can do. Sent from my iPhone using Tapatalk |
Author: | Prodigy [ Fri Jul 18, 2014 10:09 pm ] |
Post subject: | Custom boat for an outboard |
Haven't run a 90.. The f70 is so much lighter and is a sweet engine that doesn't burn much fuel..... 90 would prob get into low to mid 40"s I'd think.. Sent from my iPhone using Tapatalk |
Author: | Bad Boy [ Fri Jul 18, 2014 11:54 pm ] |
Post subject: | Re: Custom boat for an outboard |
I just bought a Yamaha F70 and I am Highly Impressed with the Fuel Economy but I only have 6 Hrs on it. Does the Fuel usage get better after 10 Hrs? |
Author: | Prodigy [ Sat Jul 19, 2014 5:23 am ] |
Post subject: | Re: Custom boat for an outboard |
Shouldn't change a lot.. What boat u have it on w what prop? Rpms? Sent from my iPhone using Tapatalk |
Author: | Bad Boy [ Sat Jul 19, 2014 7:45 pm ] |
Post subject: | Re: Custom boat for an outboard |
18X42 Southfork Vented Tunnel Hull with Hydraulic Jackplate. I ran a 15 P Powertech Semicleaver and was hitting the Rev Limiter @ 6300. I just ordered a 13x17 P True Yamaha Semicleaver. That should keep me off the Rev Limiter and give me more Speed. |
Author: | 4Cody4 [ Wed Jun 20, 2018 11:06 am ] |
Post subject: | Re: Custom boat for an outboard |
Bump for an oldie. I was just doing some homework on re-powering with an outboard and this is about the best thread I've found so far. Anybody have anything to add with an 1854 sized boat and a 70ish HP outboard? Can anybody tell me if the boat (square chine) will slide less or more with the outboard than with the mm? Thanks, |
Author: | WestEndAngler [ Thu Jun 21, 2018 10:51 am ] |
Post subject: | Re: Custom boat for an outboard |
Author: | 4Cody4 [ Thu Jun 21, 2018 11:28 am ] |
Post subject: | Re: Custom boat for an outboard |
That is helpful. I was planning to go run it a while and then possibly have some runners added to the bottom if it was skating bad. I’m hesitant to do that though just because there aren’t any builders near me. Prowler is probably my closest option. Sent from my iPhone using Tapatalk |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |