| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| LED strip lights http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=65963 |
Page 1 of 1 |
| Author: | Bfields [ Tue Feb 23, 2016 1:51 pm ] |
| Post subject: | LED strip lights |
So ive got these cheap ebay strip lights to put inside my hull. Well i have a textured hull which is great and all until you try to stick crap to them. I have seen where people just use superglue as a filler/adhesive. Anyone have some tips for mounting? Im sure im not the first to have this problem. Thks for anything yall can throw my way |
|
| Author: | HOTSAUCE170 [ Tue Feb 23, 2016 2:02 pm ] |
| Post subject: | Re: LED strip lights |
clear silicone |
|
| Author: | wade_660 [ Tue Feb 23, 2016 2:09 pm ] |
| Post subject: | Re: LED strip lights |
I use rtv Sent from my iPhone using Tapatalk |
|
| Author: | Russ [ Tue Feb 23, 2016 2:33 pm ] |
| Post subject: | Re: LED strip lights |
Gum. Don't overthink it, though. Double sided tape, folded over gorilla or duck tape, or silicone. The clear works good in case you get it over the light, it won't obscure light like the blue marine will. Sent from my iPad using Tapatalk |
|
| Author: | Bfields [ Tue Feb 23, 2016 3:21 pm ] |
| Post subject: | Re: LED strip lights |
Im probably going to go with clear silicone. more than likely im overthinking it. 1553 Havoc boat btw so 2 strips will do me fine. thanks again fellas |
|
| Author: | LB200 [ Tue Feb 23, 2016 6:59 pm ] |
| Post subject: | Re: LED strip lights |
I have never had silicone stick to anything for very long but the lights are pretty light. I would use 3m double sided tape if the regular glue on the lights won't work |
|
| Author: | jakehawk9 [ Tue Feb 23, 2016 7:03 pm ] |
| Post subject: | Re: LED strip lights |
My lights have been stuck with silicone for 10 months now. Still stuck It's simple. get a mud motor. shoot ducks in the face. |
|
| Author: | Andy [ Tue Feb 23, 2016 8:31 pm ] |
| Post subject: | Re: LED strip lights |
Rivet in aluminum angle. Stick it to the top section facing down. Gives off a lot of light and comes out very clean |
|
| Author: | duckhunter888 [ Tue Feb 23, 2016 9:55 pm ] |
| Post subject: | Re: LED strip lights |
Industrial strength Velcro strips |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|